Currently, our 300-210 SITCS online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.
If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.
Now, begin to test:
Currently, our 200-601 IMINS2 online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.
If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.
Now, begin to test:
Please go to 200-601 IMINS2 Online Test-Managing Industrial Networks for Manufacturing with Cisco Technologies to view the test
Currently, our 300-207 SITCS online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.
If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.
Now, begin to test:
Please go to 300-207 SITCS Online Test-Implementing Cisco Threat Control Solutions to view the test
Currently, our 200-401 IMINS online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.
If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.
Now, begin to test:
Please go to 200-401 IMINS Online Test-Managing Industrial Networks with Cisco Networking Technologies to view the test
Managing Industrial Networks with Cisco Networking Technologies is the full name of 200-401 test. The formerly exam is 600-601. The Associated Certifications is Cisco Industrial Networking Specialist. There are 55-65 questions in real Cisco 200-401 exam, which will take the candidates 75 minutes to complete the test. The available language is English. Candidates can register Cisco 200-401 IMINS exam at Pearson VUE.
Cisco 200-401 exam tests a candidate’s knowledge of the OSI layers of IP networks, as well as networking devices like routers and switches, and cabling approaches; specific industrial devices such as drives, PLCs, sensors, and substation equipment; relevant industrial standards and models such as TIA, the Purdue model, and environmental standards; and various safety protocols important in an industrial zone.
Below are the details of Cisco 200-401 IMINS exam toics.
1.0 Install, Replace, and/or Remove an End-Device 15%
1.1 Demonstrate knowledge of different industrial end-point devices and the interconnections for those devices to perform appropriately in an industrial setting to incorporate elements of bandwidth, real-time, precision, etc.
1.2 Given a config script for a topology, determine the appropriate location for the installation of the industrial ruggedized end-point device and how that device will interact with other elements
1.3 Ensure proper industrial network operation of a given end-device following replacement by verifying that industrial ruggedized elements (ports, IP address, connectivity, subnet mask, default gateway) are appropriately configured/connected
1.4 Demonstrate an understanding of safe physical installation of various industrial ruggedized end-devices within an industrial setting following a terminal block diagram
2.0 Install, Replace, and/or Remove an Infrastructure Device 23%
2.1 Demonstrate a knowledge of how different industrial application/network protocols operate within the network topology (Ethernet/IP, 61850, etc.)
2.2 Demonstrate familiarity with basic CLI/GUI configuration within an industrial network by accessing, configuring, saving, validating (ports, IP address, connectivity, subnet mask, default gateway) and exiting a network device
2.3 Demonstrate understanding of safe physical installation of various industrial ruggedized network devices within an industrial setting, (e.g. following a schematic such as a terminal block diagram, and the interdependencies of the network infrastructure devices)
2.4 Demonstrate knowledge of different industrial network infrastructure devices, their places in the industrial network, and the networking/device characteristics such as QoS, precise timing, industrial topologies, network resiliency, ruggedization, bandwidth, etc.
2.5 Illustrate understanding of the interconnections for the full network within a validation of the entire industrial network connectivity and that it is aligned with the provided design diagram (correct number of devices and/or IP addresses, cables are properly labelled and connected to the proper places, usage of appropriate icons) to include ensuring that configuration files are up to date and available
2.6 Illustrate an understanding of the safety and security risks (company or industry, e.g. Purdue model) for a given industrial infrastructure device and apply the appropriate steps to secure it (e.g. are unused ports turned off, telnet versus SSH, https versus http, network segmentation)
3.0 Install, Replace, and/or Remove Cables (Network and/or Power) 10%
3.1 Demonstrate the selection of cable channel for an industrial application with appropriate cable and connectors, for example two-pair, four-pair cable, high-flex, high- EMI, unshielded, fiber, and copper
3.2 Demonstrate safe and secure installation, identification, and documentation best practices for various industrial environments including grounding, bonding, shielding, etc. (for example: TIA1005, TIA568c.0, EN10174, TIA606b, and NEC article 800)
3.3 Identify the steps and tools for validating the newly installed cabling and connectors (for example: TIA568c.2)
4.0 Troubleshooting 35%
4.1 Layer 1
4.1.a Identify cable or device issues by visual inspection, test tools, and examining traffic statistics via system logs and/or end devices UIs
4.1.b Characterize the symptoms associated with a duplex mismatch situation
4.2 Layer 2
4.2.a Given a scenario in an industrial setting, troubleshoot a switch port by reviewing the UI, configuration, link lights, and/or looking at counters or packet capture (e.g. multicast, QoS)
4.2.b Given network symptoms identify the likely errors and the root causes of those errors (e.g. baud rate, network loops, spanning tree)
4.3 Layer 3
4.3.a Given a scenario in an industrial setting, troubleshoot a networking device by reviewing the UI, configuration, addressing/subnet mask, link lights, and/or looking at counters or packet capture (e.g. routing protocol, QoS, duplicate IP)
4.3.b Determine if there is layer 3 connectivity using common tools (e.g. trace route, ping, etc.)
4.4 End to End
4.4.a Determine if there is application connectivity and appropriate industrial performance using common tools (e.g. trace route, ping, telnet, etc.)
4.5 Relevant Networking Issues
4.5.a Identify and collect relevant troubleshooting information for issue reporting/escalation/duplication
4.5.b Demonstrate appropriate knowledge to proactively identify cyber and physical security incidents
4.5.c Demonstrate an understanding of secure, safe, and non-disruptive methods during industrial network monitoring and diagnosis
5.0 Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices 17%
5.1 Given a scenario, ensure reliable back-ups of current configuration are being made
5.2 Given a scenario, verify that the appropriate firmware is loaded to support the system
5.3 Demonstrate an understanding of the importance of maintaining updated firmware to minimize security holes
5.4 Demonstrate an understanding of appropriate techniques to upload software to a Cisco IOS networking device
5.5 Provided a deployed asset inventory database illustrate an understanding of appropriate methods for updating and/or maintaining the database (hardware, operating system and patch level, which people have access to different systems)
5.6 Demonstrate an understanding of the conditions that cause deterioration of equipment (cables, devices, etc.) as related to industrial environments
5.7 As part of the change management process identify the relevant documentation artifacts to be maintained for all stakeholders
Cisco Certified Network Associate Exam is the full name of 200-120 CCNA test. The Associated Certifications is CCNA Routing and Switching. There are 50-60 questions in real Cisco 200-120 CCNA exam, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 200-120 CCNA exam at Pearson VUE testing center.
The 200-120 CCNA is the composite exam associated with the Cisco CCNA Routing and Switching certification. Cisco 200-120 CCNA exam tests a candidate’s knowledge and skills required to install, operate, and troubleshoot a small to medium size enterprise branch network.
Cisco 200-120 CCNA exam topics are helpful in your preparation. Below are the details from the offical website.
5% 1.0 Operation of IP Data Networks
1.1 Recognize the purpose and functions of various network devices such as Routers, Switches, Bridges and Hubs
1.2 Select the components required to meet a given network specification
1.3 Identify common applications and their impact on the network
1.4 Describe the purpose and basic operation of the protocols in the OSI and TCP/IP models
1.5 Predict the data flow between two hosts across a network
1.6 Identify the appropriate media, cables, ports, and connectors to connect Cisco network devices to other network devices and hosts in a LAN
20% 2.0 LAN Switching Technologies
2.1 Determine the technology and media access control method for Ethernet networks
2.2 Identify basic switching concepts and the operation of Cisco switches.
2.2.a Collision Domains
2.2.b Broadcast Domains
2.2.c Ways to switch
2.2.c (i) Store
2.2.c (ii) Forward
2.2.c (iii) Cut through
2.2.c (iv) CAM table
2.3 Configure and verify initial switch configuration including remote access management
2.3.a hostname
2.3.b Managment IP address
2.3.c IP default-gateway
2.3.d Local user and password
2.3.e Enable secret password
2.3.f Console and VTY logins
2.3.g exec-timeout
2.3.h Service password encryption
2.3.i copy run start
2.4 Verify network status and switch operation using basic utilities
2.4.a ping
2.4.b telnet
2.4.c SSH
2.5 Describe how VLANs create logically separate networks and the need for routing between them
2.5.a Explain network segmentation and basic traffic management concepts
2.6 Configure and verify VLANs
2.7 Configure and verify trunking on Cisco switches
2.7.a DTP (topic)
2.7.b Auto-negotiation
2.8 Identify enhanced switching technologies
2.8.a RSTP
2.8.b PVSTP
2.8.c EtherChannels
2.9 Configure and verify PVSTP operation
2.9.a Describe root bridge election
2.9.b Spanning tree mode
5% 3.0 IP addressing (IPv4/IPv6)
3.1 Describe the operation and necessity of using private and public IP addresses for IPv4 addressing
3.2 Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment
3.3 Identify the appropriate IPv4 addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN LAN/WAN environment
3.4 Describe the technological requirements for running IPv6 in conjunction with IPv4
3.4.a Dual stack
3.5 Describe IPv6 addresses
3.5.a Global unicast
3.5.b Multicast
3.5.c Link local
3.5.d Unique local
3.5.e EUI 64
3.5.f Auto-configuration
20% 4.0 IP Routing Technologies
4.1 Describe basic routing concepts
4.1.a Packet forwarding
4.1.b Router lookup process
4.1.c Process Switching/Fast Switching/CEF
4.2 Configure and verify utilizing the CLI to set basic router configuration
4.2.a Hostname
4.2.b Local user and password
4.2.c Enable secret password
4.2.d Console and VTY logins
4.2.e exec-timeout
4.2.f Service password encryption
4.2.g Interface IP Address
4.2.g (i) loopback
4.2.h banner
4.2.i MOTD
4.2.j copy run start
4.3 Configure and verify operation status of a device interface
4.3.a Serial
4.3.b Ethernet
4.4 Verify router configuration and network connectivity using
4.4.a ping
4.4.a (i) Extended ping
4.4.b traceroute
4.4.c telnet
4.4.d SSH
4.4.e Show cdp neighbors
4.5 Configure and verify routing configuration for a static or default route given specific routing requirements
4.6 Differentiate methods of routing and routing protocols
4.6.a Static vs. dynamic
4.6.b Link state vs. distance vector
4.6.c next hop
4.6.d IP routing table
4.6.e Passive Interfaces (how they work)
4.6.f Administrative distance
4.6.g split horizon
4.6.h metric
4.7 Configure and verify OSPF
4.7.a Benefit of single area
4.7.b Configure OSPv2
4.7.c Configure OSPv3
4.7.d Router ID
4.7.e Passive Interface
4.7.f Discuss multi-area OSPF
4.7.g Understand LSA types and purpose
4.8 Configure and verify interVLAN routing (Router on a stick)
4.8.a Sub interfaces
4.8.b Upstream routing
4.8.c Encapsulation
4.9 Configure SVI interfaces
4.10 Manage Cisco IOS Files
4.10.a Boot Preferences
4.10.b Cisco IOS Images (15)
4.10.c Licensing
4.10.c (i) Show license
4.10.c (ii) Change license
4.11 Configure and verify EIGRP (single AS)
4.11.a Feasible Distance/Feasible Successors/Administrative distance
4.11.b Feasibility condition
4.11.c Metric composition
4.11.d Router ID
4.11.e Auto summary
4.11.f Path Selection
4.11.g Load Balancing
4.11.g (i) Unequal
4.11.g (ii) Equal
10% 5.0 IP Services
5.1 Configure and verify DHCP (IOS Router)
5.1.a Configuring router interfaces to use DHCP
5.1.b DHCP options (Basic overview and functionality)
5.1.c Excluded addresses
5.1.d Lease time
5.2 Describe the types, features, and applications of ACLs
5.2.a Standard (editing and sequence numbers)
5.2.b Extended
5.2.c Named
5.2.d Numbered
5.2.e Log option
5.3 Configure and verify ACLs in a network environment
5.3.a Named
5.3.b Numbered
5.3.c Log option
5.4 Identify the basic operation of NAT
5.4.a Purpose
5.4.b Pool
5.4.c Static
5.4.d 1 to 1
5.4.e Overloading
5.4.f Source addressing
5.4.g One-way NAT
5.5 Configure and verify NAT for given network requirements
5.6 Configure and verify NTP as a client
5.7 Recognize High availability (FHRP)
5.7.a VRRP
5.7.b HSRP
5.7.c GLBP
5.8 Configure and verify syslog
5.8.a Utilize syslog output
5.9 Describe SNMP v2 and v3
10% 6.0 Network Device Security
6.1 Configure and verify network device security features
6.1.a Device password security
6.1.b Enable secret vs enable
6.1.c Transport
6.1.c (i) Disable telnet
6.1.c (ii) SSH
6.1.d VTYs
6.1.e Physical security
6.1.f Service password
6.1.g Describe external authentication methods
6.2 Configure and verify switch port security
6.2.a Sticky MAC
6.2.b MAC address limitation
6.2.c Static/dynamic
6.2.d Violation modes
6.2.d (i) errDisable
6.2.d (ii) shutdown
6.2.d (iii) protect restrict
6.2.e Shutdown unused ports
6.2.f errDisable recovery
6.2.g Assign unused ports to an unused VLAN
6.2.h Putting native VLAN to other than VLAN 1
6.3 Configure and verify ACLs to filter network traffic
6.4 Configure and verify an ACLs to limit telnet and SSH access to the router
20% 7.0 Troubleshooting
7.1 Troubleshoot and correct common problems associated with IP addressing and host configurations
7.2 Troubleshoot and resolve VLAN problems
7.2.a Identify that VLANs are configured
7.2.b Verify port membership correct
7.2.c Correct IP address is configured
7.3 Troubleshoot and resolve trunking problems on Cisco switches
7.3.a Verify correct trunk states
7.3.b Verify correct encapsulation id configured
7.3.c Correct VLANs allowed
7.4 Troubleshoot and resolve ACL issues
7.4.a Verify statistics
7.4.b Verify permitted networks
7.4.c Verify direction
7.4.c (i) Interface
7.5 Troubleshoot and resolve Layer 1 problems
7.5.a Framing
7.5.b CRC
7.5.c Runts
7.5.d Giants
7.5.e Dropped packets
7.5.f Late collisions
7.5.g Input/output errors
7.6 Identify and correct common network problems
7.7 Troubleshoot and resolve spanning tree operation issues
7.7.a Verify root switch
7.7.b Verify priority
7.7.c Verify mode is correct
7.7.d Verify port states
7.8 Troubleshoot and resolve routing issues
7.8.a Verify routing is enabled (SHIP protocols)
7.8.b Verify routing table is correct
7.8.c Verify correct path selection
7.9 Troubleshoot and resolve OSPF problems
7.9.a Verify neighbor adjacencies
7.9.b Verify hello and dead timers
7.9.c Verify OSPF area
7.9.d Verify interface MTU
7.9.e Verify network types
7.9.f Verify neighbor states
7.9.g Review OSPF topology table
7.10 Troubleshoot and resolve EIGRP problems
7.10.a Verify neighbor adjacencies
7.10.b Verify AS number
7.10.c Verify load balancing
7.10.d Split horizon
7.11 Troubleshoot and resolve interVLAN routing problems
7.11.a Verify connectivity
7.11.b Verify encapsulation
7.11.c Verify subnet
7.11.d Verify native VLAN
7.11.e Port mode trunk status
7.12 Troubleshoot and resolve WAN implementation issues
7.12.a Serial interfaces
7.12.b Frame relay
7.12.c PPP
7.13 Monitor NetFlow statistics
7.14 Troubleshoot EtherChannel problems
10% 8.0 WAN Technologies
8.1 Identify different WAN Technologies
8.1.a Metro Ethernet
8.1.b VSAT
8.1.c Cellular 3G/4G
8.1.d MPLS
8.1.e T1/E1
8.1.f ISDN
8.1.g DSL
8.1.h Frame relay
8.1.i Cable
8.1.j VPN
8.2 Configure and verify a basic WAN serial connection
8.3 Configure and verify a PPP connection between Cisco routers
8.4 Configure and verify frame relay on Cisco routers
8.5 Implement and troubleshoot PPPoE
The 100-101 Interconnecting Cisco Networking Devices Part 1 (ICND1) is the exam associated with the CCENT certification and a tangible first step in achieving the CCNA Routing and Switching certification. This 100-101 ICND1 exam tests a candidate’s knowledge and skills required to successfully install, operate, and troubleshoot a small branch office network.
In real Cisco 100-101 ICND1 exam, there are 45-55 questions, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 100-101 ICND1 exam at Pearson VUE testing center.
Knowing Cisco 100-101 ICND1 exam topics is also important in your preparation.
1.0 Operation of IP Data Networks 6%
1.1 Recognize the purpose and functions of various network devices such as routers, switches, bridges and hubs
1.2 Select the components required to meet a given network specification
1.3 Identify common applications and their impact on the network
1.4 Describe the purpose and basic operation of the protocols in the OSI and TCP/IP models
1.5 Predict the data flow between two hosts across a network
1.6 Identify the appropriate media, cables, ports, and connectors to connect Cisco network devices to other network devices and hosts in a LAN
2.0 LAN Switching Technologies 21%
2.1 Determine the technology and media access control method for Ethernet networks
2.2 Identify basic switching concepts and the operation of Cisco switches
2.2.a Collision domains
2.2.b Broadcast domains
2.2.c Ways to switch
2.2.c [i] Store
2.2.c [ii] Forward
2.2.c [iii] Cut through
2.2.c [iv] CAM Table
2.3 Configure and verify initial switch configuration including remote access management
2.3.a hostname
2.3.b mgmt ip address
2.3.c Ip default-gateway
2.3.d local user and password
2.3.e enable secret password
2.3.f console and VTY logins
2.3.g exec-timeout
2.3.h service password encryption
2.3.i copy run start
2.4 Verify network status and switch operation using basic utilities such as
2.4.a ping
2.4.b telnet
2.4.c SSH
2.5 Describe how VLANs create logically separate networks and the need for routing between them
2.5.a Explain network segmentation and basic traffic management concepts
2.6 Configure and verify VLANs
2.7 Configure and verify trunking on Cisco switches
2.7.a DTP (topic)
2.7.b Auto-negotiation
3.0 IP addressing (IPv4/IPv6) 11%
3.1 Describe the operation and necessity of using private and public IP addresses for IPv4 addressing
3.2 Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment
3.3 Identify the appropriate IPv4 addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN environment
3.4 Describe the technological requirements for running IPv6 in conjunction with IPv4
3.4.a Dual stack
3.5 Describe IPv6 addresses
3.5.a Global unicast
3.5.b Multicast
3.5.c Link local
3.5.d Unique local
3.5.e EUI 64
3.5.f Auto-configuration
4.0 IP Routing Technologies 26%
4.1 Describe basic routing concepts
4.1.a Packet forwarding
4.1.b Router lookup process
4.1.c Process Switching/Fast Switching/CEF
4.2 Configure and verify utilizing the CLI to set basic Router configuration
4.2.a Hostname
4.2.b Local user & password
4.2.c Enable secret password
4.2.d Console & VTY logins
4.2.e exec-timeout
4.2.f service password encryption
4.2.g Interface IP Address
4.2.g [i] loopback
4.2.h banner
4.2.i motd
4.2.j copy run start
4.3 Configure and verify operation status of an Ethernet interface
4.4 Verify router configuration and network connectivity using
4.4.a ping
4.4.a [i] Extended ping
4.4.b traceroute
4.4.c telnet
4.4.d SSH
4.4.e Show cdp neighbors
4.5 Configure and verify routing configuration for a static or default route given specific routing requirements
4.6 Differentiate methods of routing and routing protocols
4.6.a Static vs. dynamic
4.6.b Link state vs. distance vector
4.6.c Next hop
4.6.d Ip routing table
4.6.e Passive interfaces (how they work)
4.7 Configure and verify OSPF (single area)
4.7.a Benefit of single area
4.7.b Configure OSPv2 in a single area
4.7.c Configure OSPv3 in a single area
4.7.d Router ID
4.7.e Passive interface
4.8 Configure and verify interVLAN routing (router on a stick)
4.8.a Sub interfaces
4.8.b Upstream routing
4.8.c Encapsulation
4.9 Configure SVI interfaces.
5.0 IP Services 8%
5.1 Configure and verify DHCP (IOS router)
5.1.a Configuring router interfaces to use DHCP
5.1.b DHCP options (Basic overview and functionality)
5.1.c Excluded addresses
5.1.d Lease time
5.2 Describe the types, features, and applications of ACLs
5.2.a Standard (editing and sequence numbers)
5.2.b Extended
5.2.c Named
5.2.d Numbered
5.2.e Log option
5.3 Configure and verify ACLs in a network environment
5.3.a Named
5.3.b Numbered
5.3.c Log option
5.4 Identify the basic operation of NAT
5.4.a Purpose
5.4.b Pool
5.4.c Static
5.4.d 1 to 1
5.4.e Overloading
5.4.f Source addressing
5.4.g One-way NAT
5.5 Configure and verify NAT for given network requirements
5.6 Configure and verify NTP as a client
6.0 Network Device Security 15%
6.1 Configure and verify network device security features
6.1.a Device password security
6.1.b Enable secret vs. enable
6.1.c Transport
6.1.c [i] Disable telnet
6.1.c [ii] SSH
6.1.d VTYs
6.1.e Physical security
6.1.f Service password
6.1.g Describe external authentication methods
6.2 Configure and verify switch port security
6.2.a Sticky mac
6.2.b MAC address limitation
6.2.c Static/dynamic
6.2.d Violation modes
6.2.d [i] Err disable
6.2.d [ii] Shutdown
6.2.d [iii] Protect restrict
6.2.e Shutdown unused ports
6.2.f Err disable recovery
6.2.g Assign unused ports in unused VLANs
6.2.h Putting Native VLAN to other than VLAN 1
6.3 Configure and verify ACLs to filter network traffic
6.4 Configure and verify ACLs to limit telnet and SSH access to the router
7.0 Troubleshooting 13%
7.1 Troubleshoot and correct common problems associated with IP addressing and host configurations
7.2 Troubleshoot and resolve VLAN problems
7.2.a Identify that VLANs are configured
7.2.b Verify port membership is correct
7.2.c Correct IP address is configured
7.3 Troubleshoot and resolve trunking problems on Cisco switches
7.3.a Verify correct trunk states
7.3.b Verify correct encapsulation is configured
7.3.c Correct VLANs are allowed
7.4 Troubleshoot and resolve ACL issues
7.4.a Verify statistics
7.4.b Verify permitted networks
7.4.c Verify direction
7.4.c [i] Interface
7.5 Troubleshoot and resolve Layer 1 problems
7.5.a Framing
7.5.b CRC
7.5.c Runts
7.5.d Giants
7.5.e Dropped Packets
7.5.f Late Collisions
7.5.g Input/Output errors
Currently, our 600-512 NPENGACI online test only provide 20 questions. Answer one question correctly, you can get 5 points. The content of these questions are the latest exam content. Please feel free to test your skill level.
If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.
Now, begin to test:
Please go to 600-512 NPENGACI Online Test-Implementing with Cisco Network Programmability for ACI to view the test
Currently, our 600-504 NPENG online test only provide 20 questions. Answer one question correctly, you can get 5 points. The content of these questions are the latest exam content. Please feel free to test your skill level.
If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.
Now, begin to test:
Please go to 600-504 NPENG Online Test-Implementing Cisco Network Programmability to view the test
Currently, our 200-101 ICND2 online test only provide 20 questions. Answer one question correctly, you can get 5 points. The content of these questions are the latest exam content. Please feel free to test your skill level.
If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.
Now, begin to test:
Please go to 200-101 ICND2 Online Test-Interconnecting Cisco Networking Devices Part 2 (ICND2) to view the test
