Note:

  • Cisco 300-101 Route, 300-115 Switch and 300-075 CIPTV2 exam dumps have been updated on Apr.13, 2018.
  • New feedback from our customer, passed 200-150 DCICN exam with your dumps, thanks.
  • New Cisco 500-301 CCS, 700-265 and 500-551 exam dumps are available.

Tag Archives: Transport Technologies

27 Dec

640-875 SPNGN1 Online Test-Building Cisco Service Provider Next-Generation Networks, Part 1

Currently, our 640-875 SPNGN1 online test only provide 20 questions. Answer one question correctly, you can get 5 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

Which two applications require the network to have the least amount of jitter, delay, and packet loss? (Choose two.)

 
 
 
 
 
 

What is the default spanning-tree mode of an NNI port on a Cisco ME3400 switch?

 
 
 
 

Which two statements about transparent bridging operations are true? (Choose two.)

 
 
 
 
 

Which two statements about classful or classless routing protocol operations are true? (Choose two.)

 
 
 
 

When two or more different routes exist to the same destination that have been learned from two different routing protocols, what does a router use to determine the best route?

 
 
 
 
 

Which Cisco IOS XR CLI command displays the running state of each line card (including the fan tray) on the Cisco ASR 9000 Series Router?

 
 
 
 
 
 

Which Cisco IOS XR CLI command can you use to determine if the firmware on any of the line cards on the Cisco ASR 9000 Series Router needs to be upgraded?

 
 
 
 
 
 

Which Cisco IOS CLI command is used to verify the speed and duplex settings on the Fa0/1 port on a Cisco switch?

 
 
 
 
 

Which three statements about Cisco Discovery Protocol operations on a Cisco ME3400 switch are true? (Choose three.)

 
 
 
 
 

Currently, a Cisco IOS XR router is configured to send IP SLA probes to a network management station that is acting as the IP SLA target device. How can IP SLA measurement accuracy be improved and also provide additional statistics?

 
 
 
 
 

Which two statements about NetFlow support on Cisco IOS XR are true? (Choose two.)

 
 
 
 

What are the four steps to enable SSH v1 and v2 server on Cisco IOS XR routers? (Choose four.)

 
 
 
 
 
 

Generally, which way is the fastest to open S3 and S4 service requests to the Cisco TAC?

 
 
 
 
 

Which two statements about Cisco IOS XR NTP configuration are true? (Choose two.)

 
 
 
 
 
 

Which SNMPv2/SNMPv3 operation is not supported in Cisco IOS XR software?

 
 
 
 
 

Which three statements about the Cisco IOS XR task-based user authorization method are true? (Choose three.)

 
 
 
 
 
 
 

Which three statements about Cisco IOS XR CLI operations are true? (Choose three.)

 
 
 
 
 
 
 

What is the result of using the Cisco IOS copy tftp: run command?

 
 
 
 
 

Which component is integrated into the Cisco IPoDWDM interfaces?

 
 
 
 
 

What is the SDH equivalent of the SONET STS-12 framing format?

 
 
 
 
 

Question 1 of 20

 

cart

06 Oct

online cisco 642-887 spcore certification

Online Cisco 642-887 spcore certification is available for the candidates to clear the test. The Associated Certification is CCNP Service Provider. There are 65-75 questions in real Cisco 642-887 SPCORE exam, which will take the candidates 90 minutes to complete the test. The available language is English. Candidates can register Cisco 642-887 SPCORE exam at Pearson VUE testing center.

In order to help you get cisco 642-887 spcore certification, share some real 642-887 spcore questions and answers here.

When implementing MPLS DS-TE on Cisco IOS XR routers, all aggregate Cisco MPLS TE traffic is mapped to which class type by default?
A. class-type 0 (bandwidth global pool)
B. class-type 1 (bandwidth subpool)
C. class-type 2 (bandwidth priority)
D. class type class-default (bandwidth best-effort)
Answer: A

On the Cisco IOS XR, which MQC configuration is different than on the Cisco IOS and IOS XE?

A. On the Cisco IOS XR, WRED can only be applied in the output direction.
B. On the Cisco IOS XR, marking can only be applied in the input direction.
C. On the Cisco IOS XR, LLQ can be applied in the input or output direction.
D. On the Cisco IOS XR, LLQ can use up to four priority queues: level 1, level 2, level 3, and level 4.
Answer: C

On Cisco routers, how is hierarchical QoS implemented?
A. Within the parent policy, reference another child policy using the policy-map command.
B. Within the child policy, reference another parent policy using the policy-map command.
C. Use the policy-map command within a service-policy to implement nested policy-maps.
D. Within the parent policy-map, reference another child policy-map using the service-policy command.
Answer: D

Get more Cisco 642-887 spcore certification questions and answers here. 

 

 

23 Aug

642-887 SPCORE Implementing Cisco Service Provider Next-Generation Core Network Services

The 642-887 SPCORE Implementing Cisco Service Provider Next-Generation Core Network Services exam. This 642-887 SPCORE exam tests a candidate’s knowledge of the concepts and implementation of MPLS technology and MPLS-TE services. It also validates the understanding of technology principles of basic Quality of Service, and Quality of Service with Multi Protocol Label Switching (MPLS) to implement advanced features and functions.

642-887 SPCORE is known as Implementing Cisco Service Provider Next-Generation Core Network Services. The Associated Certification is CCNP Service Provider. There are 65-75 questions in real Cisco 642-887 SPCORE exam, which will take the candidates 90 minutes to complete the test. The available language is English. Candidates can register Cisco 642-887 SPCORE exam at Pearson VUE testing center.

Cisco 642-887 SPCORE exam topics are also valuable in your preparation.

38% 1.0 QOS in a Service Provider IP NGN Environment

1.1 Describe the DiffServ and IntServ QoS models
1.2 Describe the QoS mechanisms (classification and marking, congestion management and avoidance, traffic policing and shaping)
1.3 Describe IPv6 Flow Label
1.4 Describe trust boundaries in Enterprise and SP environments
1.5 Describe Cisco MQC for QoS configurations
1.6 Describe hierarchical QoS configurations
1.7 Describe the Cisco NBAR feature for discovering network protocols and for packets classifications
1.8 Describe the typical Edge PE routers and Core P routers QoS requirements
1.9 Implement classification and marking in an interdomain network using QPPB on Cisco IOS-XR and IOS-XE
1.10 Implement class-based markings on Cisco IOS-XR and IOS-XE
1.11 Implement QoS pre-classify on tunnel interface on Cisco IOS-XR and IOS-XE
1.12 Implement CB-WFQ on Cisco IOS-XR and IOS-XE
1.13 Implement LLQ on Cisco IOS-XR and IOS-XE
1.14 Implement WRED on Cisco IOS-XR and IOS-XE
1.15 Implement traffic policing on Cisco IOS-XR and IOS-XE
1.16 Implement traffic shaping on Cisco IOS-XR and IOS-XE
1.17 Describe LPTS and hardware rate limiters on Cisco IOS-XR routers
1.18 Describe MPLS EXP bits
1.19 Describe MPLS QoS implementation concepts and models
1.20 Implement MPLS DiffServ Tunneling on Cisco IOS-XR and IOS-XE
1.21 Troubleshoot QoS IOS-XR and IOS-XE configuration errors

32% 2.0 MPLS/LDP in a Service Provider IP NGN Environment

2.1 Describe the CEF, FIB, LFIB and LIB tables on Cisco routers
2.2 Describe MPLS labels and label stack operations on Cisco routers
2.3 Describe LDP operations in Cisco routers
2.4 Describe MPLS OAM (MPLS LSP Ping and MPLS Traceroute)
2.5 Describe MPLS Applications in Service provider environment
2.6 Implement LDP on Cisco IOS-XR and IOS-XE
2.7 Implement LDP high availability features on Cisco IOS-XR and IOS-XE
2.8 Troubleshoot LDP on IOS-XR and IOS-XE configuration errors

22% 3.0 MPLS/LDP in a Service Provider IP NGN Environment

3.1 Describe MPLS traffic engineering (TE) concepts
3.2 Describe MPLS TE constraint-based path computations
3.3 Describe the details of MPLS TE tunnels, including path setup procedures and path maintenance
3.4 Describe methods of assigning traffic into MPLS TE tunnels
3.5 Implement MPLS TE tunnels on Cisco IOS-XR and IOS-XE
3.6 Implement MPLS TE bandwidth control on Cisco IOS-XR and IOS-XE
3.7 Implement MPLS TE link and node protections on Cisco IOS-XR and IOS-XE

8% 4.0 Transport Technologies

4.1 Describe the SP core transition from ATM/SONET/SDH based backbone to packet based IP/MPLS backbone
4.2 Implement 10/40/100 Gigabit Ethernet Interfaces on Cisco IOS-XR routers
4.3 Describe DWDM, IPoDWDM and ROADM
4.4 Implement IPoDWDM controller/interface on Cisco IOS-XR routers

07 Aug

642-887 SPCORE Online Test-Implementing Cisco Service Provider Next-Generation Core Network Services

Currently, our 642-887 SPCORE online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

Please go to 642-887 SPCORE Online Test-Implementing Cisco Service Provider Next-Generation Core Network Services to view the test

 

cart

 

 

 

 

 


Recent Posts


Tags

300-101 ROUTE and/or Remove an End-Device and/or Remove an Infrastructure Device and/or Remove Cables (network and/or power) Cisco 642-997 DCUFI exam Cisco 642-999 DCUCI exam Configure Cisco Unity Connection Configure Cisco Unity Express using the GUI Describe and implement centralized call processing redundancy Describe Data Center Structure and Modularity Describe the Design Methodology Describe the Technologies used within the Data Center Describe WLAN Fundamentals Design and Deploy WLAN Infrastructure for Mobility Design Network Management Considerations into a Data Center Design the Access Layer of a Data Center General Networking Knowledge given a Network Design and a set of Requirements High Availability Routing Features Identify Cisco Equipment and Related Hardware Implement high availability features on Cisco Unified Fabric products in a Cisco Data Center Architecture Implement Multicast over Wireless Implement QoS for Wireless Applications Implement VoWLAN Infrastructure Security Infrastructure Services Install Integrate Client Device Security IP Services LAN Switching Technologies Layer 2 Technologies Layer 3 Technologies Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices Manage the Unified Fabric in a Cisco Data Center Architecture Monitoring and Reporting Tools Network Principles Replace Service-Related Knowledge Threat Defense Threat Defense Architectures Troubleshoot Call Setup Issues Troubleshooting Troubleshoot Registration Issues VPN Technologies WAN Technologies

Links

Powered by CCNP Exams Test Base