Currently, our 400-101 CCIE online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.
If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.
Now, begin to test:
[WATU 56]
Currently, our 300-101 ROUTE online test only provide 20 questions. Answer one question correctly, you can get 5 points. The content of these questions are the latest exam content. Please feel free to test your skill level.
If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.
Now, begin to test:
[WATU 5]
ccnp 300-135 tshoot study notes are available, which are important for the candidates to prepare the test well. Troubleshooting and Maintaining Cisco IP Networks (TSHOOT 300-135) is a qualifying exam for the Cisco CCNP Routing and Switching certification.
The TSHOOT 300-135 exam certifies that the successful candidate has the knowledge and skills necessary to:
Plan and perform regular maintenance on complex enterprise routed and switched networks
Use technology-based practices and a systematic ITIL-compliant approach to perform network troubleshooting
ccnp 300-135 tshoot study notes objectives are below.
5% 1.0 Network Principles
1.1 Use Cisco IOS troubleshooting tools
1.1.a Debug, conditional debug
1.1.b Ping and trace route with extended options
1.2 Apply troubleshooting methodologies
1.2.a Diagnose the root cause of networking issues (analyze symptoms, identify and describe root cause)
1.2.b Design and implement valid solutions
1.2.c Verify and monitor resolution
40% 2.0 Layer 2 Technologies
2.1 Troubleshoot switch administration
2.1.a SDM templates
2.1.b Managing MAC address table
2.1.C Troubleshoot Err-disable recovery
2.2 Troubleshoot Layer 2 protocols
2.2.a CDP, LLDP
2.2.b UDLD
2.3 Troubleshoot VLANs
2.3.a Access ports
2.3.b VLAN database
2.3.c Normal, extended VLAN, voice VLAN
2.4 Troubleshoot trunking
2.4.a VTPv1, VTPv2, VTPv3, VTP pruning
2.4.b dot1Q
2.4.c Native VLAN
2.4.d Manual pruning
2.5 Troubleshoot EtherChannels
2.5.a LACP, PAgP, manual
2.5.b Layer 2, Layer 3
2.5.c Load balancing
2.5.d EtherChannel misconfiguration guard
2.6 Troubleshoot spanning tree
2.6.a PVST+, RPVST +, MST
2.6.b Switch priority, port priority, path cost, STP timers
2.6.c PortFast, BPDUguard, BPDUfilter
2.6.d Loopguard, Rootguard
2.7 Troubleshoot other LAN switching technologies
2.7.a SPAN, RSPAN
2.8 Troubleshoot chassis virtualization and aggregation technologies
2.8.a Stackwise
Practice ccnp 300-135 tshoot study notes here.
cisco 300-135 tshoot boot camp training is available. The TSHOOT 300-135 exam certifies that the successful candidate has the knowledge and skills necessary to:
Plan and perform regular maintenance on complex enterprise routed and switched networks
Use technology-based practices and a systematic ITIL-compliant approach to perform network troubleshooting
Below are the details of cisco 300-135 tshoot boot camp training objectives.
5% 1.0 Network Principles
1.1 Use Cisco IOS troubleshooting tools
1.1.a Debug, conditional debug
1.1.b Ping and trace route with extended options
1.2 Apply troubleshooting methodologies
1.2.a Diagnose the root cause of networking issues (analyze symptoms, identify and describe root cause)
1.2.b Design and implement valid solutions
1.2.c Verify and monitor resolution
40% 2.0 Layer 2 Technologies
2.1 Troubleshoot switch administration
2.1.a SDM templates
2.1.b Managing MAC address table
2.1.C Troubleshoot Err-disable recovery
2.2 Troubleshoot Layer 2 protocols
2.2.a CDP, LLDP
2.2.b UDLD
2.3 Troubleshoot VLANs
2.3.a Access ports
2.3.b VLAN database
2.3.c Normal, extended VLAN, voice VLAN
2.4 Troubleshoot trunking
2.4.a VTPv1, VTPv2, VTPv3, VTP pruning
2.4.b dot1Q
2.4.c Native VLAN
2.4.d Manual pruning
2.5 Troubleshoot EtherChannels
2.5.a LACP, PAgP, manual
2.5.b Layer 2, Layer 3
2.5.c Load balancing
2.5.d EtherChannel misconfiguration guard
2.6 Troubleshoot spanning tree
2.6.a PVST+, RPVST +, MST
2.6.b Switch priority, port priority, path cost, STP timers
2.6.c PortFast, BPDUguard, BPDUfilter
2.6.d Loopguard, Rootguard
2.7 Troubleshoot other LAN switching technologies
2.7.a SPAN, RSPAN
2.8 Troubleshoot chassis virtualization and aggregation technologies
2.8.a Stackwise
Practice cisco 300-135 tshoot boot camp training here.
cisco certification 300-101 route questions are available. The ROUTE 300-101 exam certifies the routing knowledge and skills of successful candidates. They are certified in using advanced IP addressing and routing in implementing scalable and highly secure Cisco routers that are connected to LANs, WANs, and IPv6.
cisco certification 300-101 route questions objectives are below.
10% 1.0 Network Principles
1.1 Identify Cisco Express Forwarding concepts
1.1.a FIB
1.1.b Adjacency table
1.2 Explain general network challenges
1.2.a Unicast
1.2.b Out-of-order packets
1.2.c Asymmetric routing
1.3 Describe IP operations
1.3.a ICMP Unreachable and Redirects
1.3.b IPv4 and IPv6 fragmentation
1.3.c TTL
1.4 Explain TCP operations
1.4.a IPv4 and IPv6 (P)MTU
1.4.b MSS
1.4.c Latency
1.4.d Windowing
1.4.e Bandwidth-delay product
1.4.f Global synchronization
1.5 Describe UDP operations
1.5.a Starvation
1.5.b Latency
1.6 Recognize proposed changes to the network
1.6.a Changes to routing protocol parameters
1.6.b Migrate parts of the network to IPv6
1.6.c Routing protocol migration
10% 2.0 Layer 2 Technologies
2.1 Configure and verify PPP
2.1.a Authentication (PAP, CHAP)
2.1.b PPPoE (client side only)
2.2 Explain Frame Relay
2.2.a Operations
2.2.b Point-to-point
2.3.c Multipoint
Practice cisco certification 300-101 route questions here.
Currently, our 300-135 TSHOOT online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.
If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.
Now, begin to test:
[WATU 7]
Troubleshooting and Maintaining Cisco IP Networks (TSHOOT 300-135) is a qualifying exam for the Cisco CCNP Routing and Switching certification. The TSHOOT 300-135 exam certifies that the successful candidate has the knowledge and skills necessary to:
Plan and perform regular maintenance on complex enterprise routed and switched networks
Use technology-based practices and a systematic ITIL-compliant approach to perform network troubleshooting
300-135 TSHOOT is known as Troubleshooting and Maintaining Cisco IP Networks (TSHOOT). The Associated Certifications are CCNP Routing and Switching. There are 15-25 questions in real Cisco 300-135 TSHOOT exam, which will take the candidates 135 minutes to complete the test. The available language is English. Candidates can register Cisco TSHOOT 300-135 exam at Pearson VUE testing center.
300-135 TSHOOT exam topics are important in your preparation.
5% 1.0 Network Principles
1.1 Use Cisco IOS troubleshooting tools
1.1.a Debug, conditional debug
1.1.b Ping and trace route with extended options
1.2 Apply troubleshooting methodologies
1.2.a Diagnose the root cause of networking issues (analyze symptoms, identify and describe root cause)
1.2.b Design and implement valid solutions
1.2.c Verify and monitor resolution
40% 2.0 Layer 2 Technologies
2.1 Troubleshoot switch administration
2.1.a SDM templates
2.1.b Managing MAC address table
2.1.C Troubleshoot Err-disable recovery
2.2 Troubleshoot Layer 2 protocols
2.2.a CDP, LLDP
2.2.b UDLD
2.3 Troubleshoot VLANs
2.3.a Access ports
2.3.b VLAN database
2.3.c Normal, extended VLAN, voice VLAN
2.4 Troubleshoot trunking
2.4.a VTPv1, VTPv2, VTPv3, VTP pruning
2.4.b dot1Q
2.4.c Native VLAN
2.4.d Manual pruning
2.5 Troubleshoot EtherChannels
2.5.a LACP, PAgP, manual
2.5.b Layer 2, Layer 3
2.5.c Load balancing
2.5.d EtherChannel misconfiguration guard
2.6 Troubleshoot spanning tree
2.6.a PVST+, RPVST +, MST
2.6.b Switch priority, port priority, path cost, STP timers
2.6.c PortFast, BPDUguard, BPDUfilter
2.6.d Loopguard, Rootguard
2.7 Troubleshoot other LAN switching technologies
2.7.a SPAN, RSPAN
2.8 Troubleshoot chassis virtualization and aggregation technologies
2.8.a Stackwise
40% 3.0 Layer 3 Technologies
3.1 Troubleshoot IPv4 addressing and subnetting
3.1.a Address types (Unicast, broadcast, multicast, and VLSM)
3.1.b ARP
3.1.c DHCP relay and server
3.1.d DHCP protocol operations
3.2 Troubleshoot IPv6 addressing and subnetting
3.2.a Unicast
3.2.b EUI-64
3.2.c ND, RS/RA
3.2.d Autoconfig (SLAAC)
3.2.e DHCP relay and server
3.2.f DHCP protocol operations
3.3 Troubleshoot static routing
3.4 Troubleshoot default routing
3.5 Troubleshoot administrative distance
3.6 Troubleshoot passive interfaces
3.7 Troubleshoot VRF lite
3.8 Troubleshoot filtering with any protocol
3.9 Troubleshoot between any routing protocols or routing sources
3.10 Troubleshoot manual and autosummarization with any routing protocol
3.11 Troubleshoot policy-based routing
3.12 Troubleshoot suboptimal routing
3.13 Troubleshoot loop prevention mechanisms
3.13.a Route tagging, filtering
3.13.b Split-horizon
3.13.c Route poisoning
3.14 Troubleshoot RIPv2
3.15 Troubleshoot EIGRP neighbor relationship and authentication
3.16 Troubleshoot loop free path selection
3.16.a RD, FD, FC, successor, feasible successor
3.17 Troubleshoot EIGPR operations
3.17.a Stuck in active
3.18 Troubleshoot EIGRP stubs
3.19 Troubleshoot EIGRP load balancing
3.19.a Equal cost
3.19.b Unequal cost
3.20 Troubleshoot EIGRP metrics
3.21 Troubleshoot OSPF neighbor relationship and authentication
3.22 Troubleshoot network types, area types, and router types
3.22.a Point-to-point, multipoint, broadcast, nonbroadcast
3.22.b LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
3.22.c Internal router, backbone router, ABR, ASBR
3.22.d Virtual link
3.23 Troubleshoot OSPF path preference
3.24 Troubleshoot OSPF operations
3.25 Troubleshoot OSPF for IPv6
3.26 Troubleshoot BGP peer relationships and authentication
3.26.a Peer group
3.26.b Active, passive
3.26.c States and timers
3.27 Troubleshoot eBGP
3.27.a eBGP
3.27.b 4-byte AS number
5% 4.0 VPN Technologies
4.1 Troubleshoot GRE
5% 5.0 Infrastructure Security
5.1 Troubleshoot IOS AAA using local database
5.2 Troubleshoot device access control
5.2.a Lines (VTY, AUX, console)
5.2.b Management plane protection
5.2.c Password encryption
5.3 Troubleshoot router security features
5.3.a IPv4 access control lists (standard, extended, time-based)
5.3.b IPv6 traffic filter
5.3.c Unicast reverse path forwarding
5% 6.0 Infrastructure Services
6.1 Troubleshoot device management
6.1.a Console and VTY
6.1.b Telnet, HTTP, HTTPS, SSH, SCP
6.1.c (T)FTP
6.2 Troubleshoot SNMP
6.2.a V2
6.2.b V3
6.3 Troubleshoot logging
6.3.a Local logging, syslog, debugs, conditional debugs
6.3.b Timestamps
6.4 Troubleshoot Network Time Protocol(NTP)
6.4.a NTP master, client, version 3, version 4
6.4.b NTP authentication
6.5 Troubleshoot IPv4 and IPv6 DHCP
6.5.a DHCP client, IOS DHCP server, DHCP relay
6.5.b DHCP options (describe)
6.6 Troubleshoot IPv4 Network Address Translation (NAT)
6.6.a Static NAT, dynamic NAT, PAT
6.7 Troubleshoot SLA architecture
6.8 Troubleshoot tracking objects
6.8.a Tracking objects
6.8.b Tracking different entities (for example, interfaces, IPSLA results)
Exam Note: 300-135 TSHOOT is new exam instead of 642-832 TSHOOT, which begins January 30, 2015.
Related resource: http://www.cisco.com/web/learning/exams/list/tshoot2.html#~Topics
Implementing Cisco IP Routing (ROUTE 300-101) is a qualifying exam for the Cisco CCNP Routing and Switching and CCDP certifications. The ROUTE 300-101 exam certifies the routing knowledge and skills of successful candidates. They are certified in using advanced IP addressing and routing in implementing scalable and highly secure Cisco routers that are connected to LANs, WANs, and IPv6.
Implementing Cisco IP Routing is the full name of 300-101 ROUTE. There are 45-65 questions in real Cisco 300-101 ROUTE exam, which will take the candidates 120 minutes to complete the test. The available language is English. Candidates can register Cisco 300-101 ROUTE exam at Pearson VUE testing center.
Cisco 300-101 ROUTE exam objectives are as follows.
10% 1.0 Network Principles
1.1 Identify Cisco Express Forwarding concepts
1.1.a FIB
1.1.b Adjacency table
1.2 Explain general network challenges
1.2.a Unicast
1.2.b Out-of-order packets
1.2.c Asymmetric routing
1.3 Describe IP operations
1.3.a ICMP Unreachable and Redirects
1.3.b IPv4 and IPv6 fragmentation
1.3.c TTL
1.4 Explain TCP operations
1.4.a IPv4 and IPv6 (P)MTU
1.4.b MSS
1.4.c Latency
1.4.d Windowing
1.4.e Bandwidth-delay product
1.4.f Global synchronization
1.5 Describe UDP operations
1.5.a Starvation
1.5.b Latency
1.6 Recognize proposed changes to the network
1.6.a Changes to routing protocol parameters
1.6.b Migrate parts of the network to IPv6
1.6.c Routing protocol migration
10% 2.0 Layer 2 Technologies
2.1 Configure and verify PPP
2.1.a Authentication (PAP, CHAP)
2.1.b PPPoE (client side only)
2.2 Explain Frame Relay
2.2.a Operations
2.2.b Point-to-point
2.3.c Multipoint
40% 3.0 Layer 3 Technologies
3.1 Identify, configure, and verify IPv4 addressing and subnetting
3.1.a Address types (Unicast, broadcast, multicast, and VLSM)
3.1.b ARP
3.1.c DHCP relay and server
3.1.d DHCP protocol operations
3.2 Identify IPv6 addressing and subnetting
3.2.a Unicast
3.2.b EUI-64
3.2.c ND, RS/RA
3.2.d Autoconfig (SLAAC)
3.2.e DHCP relay and server
3.2.f DHCP protocol operations
3.3 Configure and verify static routing
3.4 Configure and verify default routing
3.5 Evaluate routing protocol types
3.5.a Distance vector
3.5.b Link state
3.5.c Path vector
3.6 Describe administrative distance
3.7 Troubleshoot passive interfaces
3.8 Configure and verify VRF lite
3.9 Configure and verify filtering with any protocol
3.10 Configure and verify redistribution between any routing protocols or routing sources
3.11 Configure and verify manual and autosummarization with any routing protocol
3.12 Configure and verify policy-based routing
3.13 dentify suboptimal routing
3.14 Explain ROUTE maps
3.15 Configure and verify loop prevention mechanisms
3.15.a Route tagging and filtering
3.15.b Split-horizon
3.15.c Route poisoning
3.16 Configure and verify RIPv2
3.17 Describe RIPng
3.18 Describe EIGRP packet types
3.19 Configure and verify EIGRP neighbor relationship and authentication
3.20 Configure and verify EIGRP stubs
3.21 Configure and verify EIGRP load balancing
3.21.a Equal cost
3.21.b Unequal cost
3.22 Describe and optimize EIGRP metrics
3.23 Configure and verify EIGRP for IPv6
3.24 Describe OSPF packet types
3.25 Configure and verify OSPF neighbor relationship and authentication
3.26 Configure and verify network types, area types, and router types
3.26.a Point-to-point, multipoint, broadcast, nonbroadcast
3.26.b LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
3.26.c Internal router, backbone router, ABR, ASBR
3.26.d Virtual link
3.27 Configure and verify OSPF path preference
3.28 Configure and verify OSPF operations
3.29 Configure and verify OSPF for IPv6
3.30 Describe, configure, and verify BGP peer relationships and authentication
3.30.a Peer group
3.30.b Active, passive
3.30.c States and timers
3.31 3.31 Configure and verify eBGP (IPv4 and IPv6 address families)
3.31.a 3.31.a eBGP
3.31.b 3.31.b 4-byte AS number/p>
3.31.c 3.31.c Private AS
3.32 Explain BGP attributes and best-path selection
10% 4.0 VPN Technologies
4.1 Configure and verify GRE
4.2 Describe DMVPN (single hub)
4.3 Describe Easy Virtual Networking (EVN)
10% 5.0 Infrastructure Security
5.1 Describe IOS AAA using local database
5.2 Describe device security using IOS AAA with TACACS+ and RADIUS
5.2.a AA with TACACS+ and RADIUS
5.2.b Local privilege authorization fallback
5.3 Configure and verify device access control
5.3.a Lines (VTY, AUX, console)
5.3.b Management plane protection
5.3.c Password encryption
5.4 Configure and verify router security features
5.4.a IPv4 access control lists (standard, extended, time-based)
5.4.b IPv6 traffic filter
5.4.c Unicast reverse path forwarding
20% 6.0 Infrastructure Services
6.1 Configure and verify device management
6.1.a Console and VTY
6.1.b Telnet, HTTP, HTTPS, SSH, SCP
6.1.c (T)FTP
6.2 Configure and verify SNMP
6.2.a V2
6.2.b V3
6.3 Configure and verify logging
6.3.a Local logging, syslog, debugs, conditional debugs
6.3.b Timestamps
6.4 Configure and verify Network Time Protocol (NTP)
6.4.a NTP master, client, version 3, version 4
6.4.b NTP authentication
6.5 Configure and verify IPv4 and IPv6 DHCP
6.5.a DHCP client, IOS DHCP server, DHCP relay
6.5.b DHCP options (describe)
6.6 Configure and verify IPv4 Network Address Translation (NAT)
6.6.a Static NAT, dynamic NAT, PAT
6.7 Describe IPv6 NAT
6.7.a NAT64
6.7.b NPTv6
6.8 Describe SLA architecture
6.9 Configure and verify IP SLA
6.9.a ICMP
6.10 Configure and verify tracking objects
6.10.a Tracking objects
6.10.b Tracking different entities (for example, interfaces, IPSLA results)
6.11 Configure and verify Cisco NetFlow
6.11.a NetFlow v5, v9
6.11.b Local retrieval
6.11.c Export (configuration only)
Exam Note: 300-101 ROUTE is new exam instead of 642-902 ROUTE, which begins January 30, 2015.
Related resource: http://www.cisco.com/web/learning/exams/list/route2.html#~Topics
CCNP Exams Test Base
adasd
$22.00 – $55.00
700-020 VSE Cisco Video Sales Essentials
500-325 CSA Cisco Collaboration Servers and Appliances
500-710 VII Video Infrastructure Implementation (VII)
700-265 ASAAM Cisco Advanced Security Architecture for Account Managers
| There are no products |