Note:

  • Cisco 300-101 Route, 300-115 Switch and 300-075 CIPTV2 exam dumps have been updated on Apr.13, 2018.
  • New feedback from our customer, passed 200-150 DCICN exam with your dumps, thanks.
  • New Cisco 500-301 CCS, 700-265 and 500-551 exam dumps are available.

Tag Archives: Monitoring and Reporting Tools

18 Aug

300-206 SENSS Implementing Cisco Edge Network Security Solutions

The Implementing Cisco Edge Network Security (SENSS) (300-206) exam tests the knowledge of a network security engineer to configure and implement security on Cisco network perimeter edge devices such as a Cisco switch, Cisco router, and Cisco ASA firewall. This 90-minute exam consists of 65-75 questions and focuses on the technologies used to strengthen security of a network perimeter such as Network Address Translation (NAT), ASA policy and application inspect, and a zone-based firewall on Cisco routers.

Implementing Cisco Edge Network Security Solutions is the full name of 300-206 SENSS. The Associated Certification is CCNP Security. There are 65-75 questions in real Cisco 300-206 SENSS exam, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 300-206 SENSS exam at Pearson VUE testing center.

Cisco 300-206 SENSS exam topics cover the following sections, which are valuable in your preparation.

25% 1.0 Threat Defense

1.1 Implement firewall (ASA or IOS depending on which supports the implementation)
1.1.a Implement ACLs
1.1.b Implement static/dynamic NAT/PAT
1.1.c Implement object groups
1.1.d Describe threat detection features
1.1.e Implement botnet traffic filtering
1.1.f Configure application filtering and protocol inspection
1.1.g Describe ASA security contexts
1.2 Implement Layer 2 security
1.2.a Configure DHCP snooping
1.2.b Describe dynamic ARP inspection
1.2.c Describe storm control
1.2.d Configure port security
1.2.e Describe common Layer 2 threats and attacks and mitigation
1.2.f Describe MACSec
1.2.g Configure IP source verification
1.3 Configure device hardening per best practices
1.3.a Routers
1.3.b Switches
1.3.c Firewalls

25% 2.0 Cisco Security Devices GUIs and Secured CLI Management

2.1 Implement SSHv2, HTTPS, and SNMPv3 access on the network devices
2.2 Implement RBAC on the ASA/IOS using CLI and ASDM
2.3 Describe Cisco Prime Infrastructure
2.3.a Functions and use cases of Cisco Prime
2.3.b Device Management
2.4 Describe Cisco Security Manager (CSM)
2.4.a Functions and use cases of CSM
2.4.b Device Management
2.5 Implement Device Managers
2.5.a Implement ASA firewall features using ASDM

12% 3.0 Management Services on Cisco Devices

3.1 Configure NetFlow exporter on Cisco Routers, Switches, and ASA
3.2 Implement SNMPv3
3.2.a Create views, groups, users, authentication, and encryption
3.3 Implement logging on Cisco Routers, Switches, and ASA using Cisco best practices
3.4 Implement NTP with authentication on Cisco Routers, Switches, and ASA
3.5 Describe CDP, DNS, SCP, SFTP, and DHCP
3.5.a Describe security implications of using CDP on routers and switches
3.5.b Need for dnssec

10% 4.0 Troubleshooting, Monitoring and Reporting Tools

4.1 Monitor firewall using analysis of packet tracer, packet capture, and syslog
4.1.a Analyze packet tracer on the firewall using CLI/ASDM
4.1.b Configure and analyze packet capture using CLI/ASDM
4.1.c Analyze syslog events generated from ASA

16% 5.0 Threat Defense Architectures

5.1 Design a Firewall Solution
5.1.a High-availability
5.1.b Basic concepts of security zoning
5.1.c Transparent & Routed Modes
5.1.d Security Contexts
5.2 Layer 2 Security Solutions
5.1.a Implement defenses against MAC, ARP, VLAN hopping, STP, and DHCP rogue attacks
5.1.b Describe best practices for implementation
5.1.c Describe how PVLANs can be used to segregate network traffic at Layer 2

12% 6.0 Security Components and Considerations

6.1 Describe security operations management architectures
6.1.a Single device manager vs. multi-device manager
6.2 Describe Data Center security components and considerations
6.2.a Virtualization and Cloud security
6.3 Describe Collaboration security components and considerations
6.3.a Basic ASA UC Inspection features
6.4 Describe common IPv6 security considerations
6.4.a Unified IPv6/IPv4 ACL on the ASA

16 Aug

300-208 SISAS Implementing Cisco Secure Access Solutions

The Implementing Cisco Secure Access Solutions (SISAS) (300-208) exam tests whether a network security engineer knows the components and architecture of secure access, by utilizing 802.1X and Cisco TrustSec. This 90-minute exam consists of 65-75 questions and assesses knowledge of Cisco Identity Services Engine (ISE) architecture, solution, and components as an overall network threat mitigation and endpoint control solutions. It also includes the fundamental concepts of bring your own device (BYOD) using posture and profiling services of ISE.

Implementing Cisco Secure Access Solutions is the full name of 300-208 SISAS exam. The Associated Certification is CCNP Security. There are 65-75 questions in real Cisco 300-208 SISAS exam, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 300-208 SISAS exam at Pearson VUE testing center.

Cisco 300-208 SISAS exam topics cover the following sections.

33% 1.0 Identity Management and Secure Access

1.1 Implement device administration
1.1.a Compare and select AAA options
1.1.b TACACS+
1.1.c RADIUS
1.1.d Describe Native AD and LDAP
1.2 Describe identity management
1.2.a Describe features and functionality of authentication and authorization
1.2.b Describe identity store options (i.e., LDAP, AD, PKI, OTP, Smart Card, local)
1.2.c Implement accounting
1.3 Implement wired/wireless 802.1X
1.3.a Describe RADIUS flows
1.3.b AV Pairs
1.3.c EAP types
1.3.d Describe supplicant, authenticator, and server
1.3.e Supplicant options
1.3.f 802.1X phasing (monitor mode, low impact, closed mode)
1.3.g AAA server
1.3.h Network access devices
1.4 Implement MAB
1.4.a Describe the MAB process within an 802.1X framework
1.4.b Flexible authentication configuration
1.4.c ISE authentication/authorization policies
1.4.d ISE endpoint identity configuration
1.4.e Verify MAB Operation
1.5 Implement network authorization enforcement
1.5.a dACL
1.5.b Dynamic VLAN assignment
1.5.c Describe SGA
1.5.d Named ACL
1.5.e CoA
1.6 Implement Central Web Authentication (CWA)
1.6.a Describe the function of CoA to support web authentication
1.6.b Configure authentication policy to facilitate CWA
1.6.c URL redirect policy
1.6.d Redirect ACL
1.6.e Customize web portal
1.6.f Verify central web authentication operation
1.7 Implement profiling
1.7.a Enable the profiling services
1.7.b Network probes
1.7.c IOS Device Sensor
1.7.d Feed service
1.7.e Profiling policy rules
1.7.f Utilize profile assignment in authorization policies
1.7.g Verify profiling operation
1.8 Implement guest services
1.8.a Managing sponsor accounts
1.8.b Sponsor portals
1.8.c Guest portals
1.8.d Guest Policies
1.8.e Self registration
1.8.f Guest activation
1.8.g Differentiated secure access
1.8.h Verify guest services operation
1.9 Implement posture services
1.9.a Describe the function of CoA to support posture services
1.9.b Agent options
1.9.c Client provisioning policy and redirect ACL
1.9.d Posture policy
1.9.e Quarantine/remediation
1.9.f Verify posture service operation
1.10 Implement BYOD access
1.10.a Describe elements of a BYOD policy
1.10.b Device registration
1.10.c My devices portal
1.10.d Describe supplicant provisioning

10% 2.0 Threat Defense

2.1 Describe TrustSec Architecture
2.1.a SGT Classification – dynamic/static
2.1.b SGT Transport – inline tagging and SXP
2.1.c SGT Enforcement – SGACL and SGFW
2.1.d MACsec

7% 3.0 Troubleshooting, Monitoring and Reporting Tools

3.1 Troubleshoot identity management solutions
3.1.a Identify issues using authentication event details in Cisco ISE
3.1.b Troubleshoot using Cisco ISE diagnostic tools
3.1.c Troubleshoot endpoint issues
3.1.d Use debug commands to troubleshoot RADIUS and 802.1X on IOS switches and wireless controllers
3.1.e Troubleshoot backup operations

17% 4.0 Threat Defense Architectures

4.1 Design highly secure wireless solution with ISE
4.1.a Identity Management
4.1.b 802.1X
4.1.c MAB
4.1.d Network authorization enforcement
4.1.e CWA
4.1.f Profiling
4.1.g Guest Services
4.1.h Posture Services
4.1.i BYOD Access

33% 5.0 Design Identity Management Architectures

5.1 Device administration
5.2 Identity Management
5.3 Profiling
5.4 Guest Services
5.5 Posturing Services
5.6 BYOD Access

 

 

07 Aug

300-209 SIMOS Online Test-Implementing Cisco Secure Mobility Solutions

Currently, our 300-209 SIMOS online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

In a spoke-to-spoke DMVPN topology, which type of interface does a branch router require?

 
 
 
 

Which two parameters are configured within an IKEv2 proposal on an IOS router? (Choose two.)

 
 
 
 

Which two IKEv1 policy options must match on each peer when you configure an IPsec site-to-site VPN? (Choose two.)

 
 
 
 
 

What are the three primary components of a GET VPN network? (Choose three.)

 
 
 
 
 
 

Which two GDOI encryption keys are used within a GET VPN network? (Choose two.)

 
 
 
 

What is the default topology type for a GET VPN?

 
 
 
 

What are three benefits of deploying a GET VPN? (Choose three.)

 
 
 
 
 
 

In FlexVPN, what is the role of a NHRP resolution request?

 
 
 
 

In FlexVPN, what command can an administrator use to create a virtual template interface that can be configured and applied dynamically to create virtual access interfaces?

 
 
 
 

Which of the following could be used to configure remote access VPN Host-scan and pre-login policies?

 
 
 
 

Question 1 of 10

 

cart

 

 

 

 

06 Aug

300-206 SENSS Online Test-Implementing Cisco Edge Network Security Solutions

Currently, our 300-206 SENSS online test only provide 20 questions. Answer one question correctly, you can get 5 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

Please go to 300-206 SENSS Online Test-Implementing Cisco Edge Network Security Solutions to view the test

 

cart

 

 

 

 

 

06 Aug

300-208 SISAS Online Test-Implementing Cisco Secure Access Solutions

Currently, our 300-208 SISAS online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

Please go to 300-208 SISAS Online Test-Implementing Cisco Secure Access Solutions to view the test

 

cart

 

 

 


Recent Posts


Tags

300-101 ROUTE and/or Remove an End-Device and/or Remove an Infrastructure Device and/or Remove Cables (network and/or power) Cisco 642-997 DCUFI exam Cisco 642-999 DCUCI exam Configure Cisco Unity Connection Configure Cisco Unity Express using the GUI Describe and implement centralized call processing redundancy Describe Data Center Structure and Modularity Describe the Design Methodology Describe the Technologies used within the Data Center Describe WLAN Fundamentals Design and Deploy WLAN Infrastructure for Mobility Design Network Management Considerations into a Data Center Design the Access Layer of a Data Center General Networking Knowledge given a Network Design and a set of Requirements High Availability Routing Features Identify Cisco Equipment and Related Hardware Implement high availability features on Cisco Unified Fabric products in a Cisco Data Center Architecture Implement Multicast over Wireless Implement QoS for Wireless Applications Implement VoWLAN Infrastructure Security Infrastructure Services Install Integrate Client Device Security IP Services LAN Switching Technologies Layer 2 Technologies Layer 3 Technologies Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices Manage the Unified Fabric in a Cisco Data Center Architecture Monitoring and Reporting Tools Network Principles Replace Service-Related Knowledge Threat Defense Threat Defense Architectures Troubleshoot Call Setup Issues Troubleshooting Troubleshoot Registration Issues VPN Technologies WAN Technologies

Links

Powered by CCNP Exams Test Base