Currently, our 642-742 IUWVN online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.
If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.
Now, begin to test:
cisco 642-742 iuwvn exam preparation is available. This Cisco 642-742 IUWVN exam assesses a candidate’s capability to integrate VoWLAN services into the WLAN and be able to implement QoS, MPLS, and high bandwidth applications into the wireless network.
cisco 642-742 iuwvn exam preparation objectives are below.
25% 2.0 Implement VoWLAN
2.1 Configure wireless client devices
2.1.a Reference current best practice guidelines
2.1.b Device security considerations
2.2 Configure the WLAN for VoWLAN
2.2.a Implement current best practice guidelines
2.2.b Security configurations (PEAP, EAP-TLS, EAP-FAST)
2.2.c CCKM/PKC, 802.11r
2.3 Troubleshoot VoWLAN implementation
2.3.a Spectrum Expert
2.3.b AirMagnet VoFi analyzer
2.3.c Traffic stream Metrics (TSM)
2.3.d Incremental complexity testing
20% 3.0 Implement QoS for Wireless Applications
3.1 Describe and implement general considerations for wired QoS
3.1.a Configurations
3.1.b DSCP/802.1p
3.1.c Voice VLAN
3.2 Describe and implement the appropriate Wireless QoS deployment schemes
3.2.a WMM
3.2.b 802.11e
3.2.c Mapping – wired to wireless (five and six mismatching)
3.3 Configure WCS/WLC for QoS
3.3.a Connection admission control (CAC)
3.3.b TSPEC
3.3.c QoS Basic Service Set (QBSS)
3.3.d Queues
3.3.e Bandwidth reservation
3.3.f Disable “DHCP required”
3.3.g Disable Address Resolution Protocol (ARP) unicast
3.3.h Enable ARP caching
3.3.i Cisco Identity Based Networking Services (IBN)
3.4 Reference most current best practice guidelines
Practice cisco 642-742 iuwvn exam preparation here.
Latest Cisco 642-742 IUWVN exam sample questions are available, which can make sure you pass the test. There are 50-60 questions in real Cisco 642-742 IUWVN exam, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 642-742 IUWVN exam at Pearson VUE testing center.
Share some Cisco 642-742 IUWVN exam sample questions below.
Which statement describes the benefit of WMM U-APSD over legacy 802.11 power-save mode?
A. Client can burst data without standard interframe spacing.
B. Client can burst data without ACKs.
C. Client no longer sends null frame to notify of sleep mode.
D. Client sleep mode is scheduled by AP to reduce jitter.
Answer: A
Which two items enable WMM to expedite frames from respective traffic categories? (Choose two.) Consistent CWmin and CWmax values Dynamic CWmin and CWmax values
A. AIFS
B. SIFS
C. PIFS
D. DIFS
E. U-APSD
F. PS-Poll
Answer: B,C
Get more Cisco 642-742 IUWVN exam sample questions here.
The 642-742 IUWVN Implementing Cisco Unified Wireless Voice Networks exam is the exam associated with the CCNP Wireless certification. This Cisco 642-742 IUWVN exam assesses a candidate’s capability to integrate VoWLAN services into the WLAN and be able to implement QoS, MPLS, and high bandwidth applications into the wireless network.
Implementing Cisco Unified Wireless Voice Networks is the full name of 642-742 IUWVN test. The Associated Certification is CCNP Wireless. There are 50-60 questions in real Cisco 642-742 IUWVN exam, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 642-742 IUWVN exam at Pearson VUE testing center.
Knowing Cisco 642-742 IUWVN exam topics are valuable in your preparation.
27% 1.0 Describe and Design Voice over Wireless Architecture
1.1 Describe voice as it applies to the wireless network
1.1.a Components (hardware and software)
1.1.b Call setup/data flow overview
1.1.c Other wireless voice and video services
1.1.d Standards (.11r, .11e, .11n)
1.1.e Cisco Compatible Extensions (voice features)
1.1.f Wi-Fi Multimedia (WMM)
1.1.g UAPSD
1.1.h Codecs
1.1.i Signaling Connection Control Part (SCCP)
1.1.j Session Initiation Protocol (SIP)
1.2 Design wireless for voice
1.2.a Minimum speed requirements – RSSI and SNR
1.2.b Overlap requirements
1.2.c Cell separations
1.2.d Traffic separation/quality of service (QoS)/voice VLAN
1.2.e Delay and jitter reqs
1.2.f Testing tools (AirMagnet and Veriwave)
1.2.g CAC and TSPEC
1.2.h Spectrum
1.2.h .11n
1.2.i Wireless voice client requirements
1.3 Utilize other design considerations, as per the voice design guide (VAD, MoH, Load balancing, and so on)
1.3.a VAD
1.3.b MoH
1.3.c Load balancing
1.4 Validate wireless network design for voice readiness
1.4.a Utilize the WCS voice readiness tool
1.4.b Validate site survey for voice
1.5 Validate infrastructure requirements for end-to-end voice over wireless
1.5.a CUCM
1.5.b CUCME
1.5.c QoS
1.5.d ACS
1.5.e DHCP
1.5.f TFTP
1.5.g routers
1.5.h security devices
1.6 Describe VoWLAN integration with cellular providers
25% 2.0 Implement VoWLAN
2.1 Configure wireless client devices
2.1.a Reference current best practice guidelines
2.1.b Device security considerations
2.2 Configure the WLAN for VoWLAN
2.2.a Implement current best practice guidelines
2.2.b Security configurations (PEAP, EAP-TLS, EAP-FAST)
2.2.c CCKM/PKC, 802.11r
2.3 Troubleshoot VoWLAN implementation
2.3.a Spectrum Expert
2.3.b AirMagnet VoFi analyzer
2.3.c Traffic stream Metrics (TSM)
2.3.d Incremental complexity testing
20% 3.0 Implement QoS for Wireless Applications
3.1 Describe and implement general considerations for wired QoS
3.1.a Configurations
3.1.b DSCP/802.1p
3.1.c Voice VLAN
3.2 Describe and implement the appropriate Wireless QoS deployment schemes
3.2.a WMM
3.2.b 802.11e
3.2.c Mapping – wired to wireless (five and six mismatching)
3.3 Configure WCS/WLC for QoS
3.3.a Connection admission control (CAC)
3.3.b TSPEC
3.3.c QoS Basic Service Set (QBSS)
3.3.d Queues
3.3.e Bandwidth reservation
3.3.f Disable “DHCP required”
3.3.g Disable Address Resolution Protocol (ARP) unicast
3.3.h Enable ARP caching
3.3.i Cisco Identity Based Networking Services (IBN)
3.4 Reference most current best practice guidelines
17% 4.0 Implement Multicast over Wireless
4.1 Describe general multicast concepts
4.1.a PIM (Sparse & Dense)
4.1.b CGMP
4.1.c IGMP snooping
4.1.d RP
4.2 Describe implications for multicast in 802.11
4.2.a Highest mandatory data rate
4.2.b Unicast and multicast modes
4.2.c Roaming
4.2.d Mesh
4.2.e Controllers having same CAPWAP multicast group
4.2.f Video Stream (reliable multicast)
4.3 Configure multicast in a wireless network
4.3.a Infrastructure multicast group
4.3.b IGMP snooping on the controller
4.3.c Video Stream (reliable multicast)
4.3.d Mobility Group multicast
4.4 Troubleshoot multicast in a wireless network
4.4.a Packet captures
4.4.b Show IPM route
4.4.c Controller logs
4.4.d Debugs
4.4.d (i) Debug bcast IGMP enable
4.4.d (ii) Debug mobility multicast enable
13% 5.0 Prepare the Wireless Network for VIdeo/High- Bandwidth Applications
5.1 Describe benefits of 802.11n for video
5.2 Determine bandwidth requirements for specified applications
5.3 Identify application specific wireless network requirements
5.3.a WLC to wired network
5.3.b Multicast for wireless video
5.3.c Wireless security cameras
5.3.d Real-time video streaming/video conferencing
Related resource: http://www.cisco.com/web/learning/exams/list/iuwvn.html#~Topics