Posted on 5 Comments

640-722 IUWNE Online Test-Implementing Cisco Unified Wireless Networking Essentials v2.0

Currently, our 640-722 IUWNE online test only provide 20 questions. Answer one question correctly, you can get 5 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

[WATU 51]

 

cart

Posted on 3 Comments

cisco certification 642-747 iuwms programs

cisco certification 642-747 iuwms programs are available now. This Cisco 642-747 IUWMS exam assesses a candidate’s capability to integrate mobility services into the WLAN, to tune and troubleshoot the WLAN, and to implement indoor enterprise mesh networks.

cisco certification 642-747 iuwms programs exam objectives below.

20% 1.0 Describe WLAN Fundamentals

1.1 Describe the impact of distributed antenna systems (DAS) for location-based services
1.2 Tracking mobile clients
1.2.a Active radio frequency identification (RFID) tag
1.2.b Wi-Fi devices
1.2.c Active interferers
1.3 Describe the applications of RFID, Chokepoint, and TDoA Tags
1.3.a Compare and contrast Cisco Wireless Control System (Cisco WCS) and third-party applications
1.4 Calibrate Received Signal Strength Indicator (RSSI) for the Cisco and third-party implementation
1.5 Configure, generate, and interpret location and event notifications
1.6 Configure and tune the Mobility Services Engine (for example, Simple Network Management Protocol (SNMP) impact on network traffic and platform hardware)
1.6.a NMSP
1.7 Design access point (AP)/antenna deployment model for location
1.8 Describe location techniques
1.8.a Angulations
1.8.b Cell of origin
1.8.c TDoA/ToA Lateration
1.8.d RSS Lateration
1.8.e Pattern Recognition
1.8.f RF Fingerprinting

23% 2.0 Design and Deploy WLAN Infrastructure for Mobility

2.1 Configure single Service Set Identifier (SSID) designs w/mobility
2.1.a AP group VLANs
2.1.b Identity Based Networking (IBN)
2.1.c Single SSID/Multiple WLAN
2.2 Analyze implications of L2 and L3 roaming
2.2.a Avoid salt and pepper
2.2.b Minimize intercontroller roaming
2.2.c Mobility tunneling
2.3 Implement high availability
2.3.a Legacy primary, secondary, and tertiary
2.3.b Backup primary and backup secondary outside of mobility group
2.3.c Enhanced timers
2.3.d AP fallback
2.3.e AP prioritization
2.3.f Anchor controller redundancy
2.3.g RF redundancy – coverage hole, RRM, and double AP
2.4 Troubleshoot AP join process using the following solutions
2.4.a AP console debug
2.4.b AP console config
2.4.c WLC debug
2.4.d WLC logs
2.4.e Switchport, DHCP, and VLAN
2.5 Implement the following Cisco Unified Wireless best practices
2.5.a LAG vs. Port-based
2.5.b RF groups
2.5.c H-REAP
2.5.d AP count; per-subnet limitation
2.5.e Client subnet sizing considerations
2.5.f Per WLAN client limit
2.5.g Office Extend
2.5.h Passive client
2.6 Define and implement mobility groups/list
2.6.a AP regulatory domain flexibility
2.6.b 24/48/72 WLC mobility size
2.7 Adjust authentication/EAP timers
2.8 Tune RF environment for context aware services
2.8.a Data rates
2.8.b Transmit power levels and thresholds
2.8.c Channels and DCA
2.8.d Band Select
2.8.e ClientLink
2.9 Troubleshooting intercontroller communications
2.9.a Mobility group formation
2.9.b RF group formation
2.9.c Intercontroller roaming

Practice cisco certification 642-747 iuwms programs here. 

 

 

Posted on

642-747 IUWMS Implementing Cisco Unified Wireless Mobility Services

The IUWMS Implementing Cisco Unified Wireless Mobility Services exam is the exam associated with the CCNP Wireless certification. This Cisco 642-747 IUWMS exam assesses a candidate’s capability to integrate mobility services into the WLAN, to tune and troubleshoot the WLAN, and to implement indoor enterprise mesh networks.

642-747 IUWMS is known as Implementing Cisco Unified Wireless Mobility Services. The Associated Certification is CCNP Wireless. There are 50-60 questions in real Cisco 642-747 IUWMS test, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 642-747 IUWMS exam at Pearson VUE testing center.

Below are the details of Cisco 642-747 IUWMS exam topics.

20% 1.0 Describe WLAN Fundamentals

1.1 Describe the impact of distributed antenna systems (DAS) for location-based services
1.2 Tracking mobile clients
1.2.a Active radio frequency identification (RFID) tag
1.2.b Wi-Fi devices
1.2.c Active interferers
1.3 Describe the applications of RFID, Chokepoint, and TDoA Tags
1.3.a Compare and contrast Cisco Wireless Control System (Cisco WCS) and third-party applications
1.4 Calibrate Received Signal Strength Indicator (RSSI) for the Cisco and third-party implementation
1.5 Configure, generate, and interpret location and event notifications
1.6 Configure and tune the Mobility Services Engine (for example, Simple Network Management Protocol (SNMP) impact on network traffic and platform hardware)
1.6.a NMSP
1.7 Design access point (AP)/antenna deployment model for location
1.8 Describe location techniques
1.8.a Angulations
1.8.b Cell of origin
1.8.c TDoA/ToA Lateration
1.8.d RSS Lateration
1.8.e Pattern Recognition
1.8.f RF Fingerprinting

23% 2.0 Design and Deploy WLAN Infrastructure for Mobility

2.1 Configure single Service Set Identifier (SSID) designs w/mobility
2.1.a AP group VLANs
2.1.b Identity Based Networking (IBN)
2.1.c Single SSID/Multiple WLAN
2.2 Analyze implications of L2 and L3 roaming
2.2.a Avoid salt and pepper
2.2.b Minimize intercontroller roaming
2.2.c Mobility tunneling
2.3 Implement high availability
2.3.a Legacy primary, secondary, and tertiary
2.3.b Backup primary and backup secondary outside of mobility group
2.3.c Enhanced timers
2.3.d AP fallback
2.3.e AP prioritization
2.3.f Anchor controller redundancy
2.3.g RF redundancy – coverage hole, RRM, and double AP
2.4 Troubleshoot AP join process using the following solutions
2.4.a AP console debug
2.4.b AP console config
2.4.c WLC debug
2.4.d WLC logs
2.4.e Switchport, DHCP, and VLAN
2.5 Implement the following Cisco Unified Wireless best practices
2.5.a LAG vs. Port-based
2.5.b RF groups
2.5.c H-REAP
2.5.d AP count; per-subnet limitation
2.5.e Client subnet sizing considerations
2.5.f Per WLAN client limit
2.5.g Office Extend
2.5.h Passive client
2.6 Define and implement mobility groups/list
2.6.a AP regulatory domain flexibility
2.6.b 24/48/72 WLC mobility size
2.7 Adjust authentication/EAP timers
2.8 Tune RF environment for context aware services
2.8.a Data rates
2.8.b Transmit power levels and thresholds
2.8.c Channels and DCA
2.8.d Band Select
2.8.e ClientLink
2.9 Troubleshooting intercontroller communications
2.9.a Mobility group formation
2.9.b RF group formation
2.9.c Intercontroller roaming

22% 3.0 Implement MSE Architecture

3.1 Describe Cisco Mobility Services Engine (MSE) capabilities and integration with wireless network architecture
3.1.a Context aware
3.1.b Adaptive wireless intrusion prevention system (IPS)
3.1.c Guest tracking
3.1.d Spectrum intelligence
3.1.e Scalability
3.2 Deploy context-aware services for specific environments
3.2.a Mixed-use environments
3.2.b Complex RF environments
3.2.c Small areas
3.2.d Timing issues
3.2.e Adjusting history and location parameters
3.2.f Multifloor facilities
3.2.g Re-calibration
3.3 Integrate third-party applications
3.3.a Server engines
3.3.b Licensing
3.3.c Common API
3.4 Integrate and manage MSE with Cisco WCS
3.4.a Install and Synchronize
3.4.b Location
3.4.c Enable tracking
3.4.d Define the MSE parameters
3.4.e Understand advanced parameters
3.5 Maintain MSE
3.5.a Database clean-up
3.5.b Database back-up and restore
3.5.c Upgrade
3.6 Troubleshoot MSE operations
3.6.a Debug of Network Mobility Services Protocol (NMSP)
3.6.b Debug of controller
3.6.c Location accuracy tool
3.6.d Debug RFID

17% 4.0 Implement and Manage Indoor and Outdoor Mesh

4.1 Describe wireless Mesh and its benefits
4.2 Describe the following Mesh operation modes:
4.2.a RAP
4.2.b MAP
4.2.c Ethernet bridge functionality for Mesh
4.3 Implement Mesh
4.3.a Hop count
4.3.b Backhaul caveats (throughput rates, QoS, path properties)
4.3.c Secondary backhaul
4.3.d SAP authorization (MAC filter entry)
4.3.e Utilize WLC CLI
4.3.f Outdoor RF considerations
4.4 Describe Mesh convergence
4.4.a Cisco adaptive wireless path protocol (AWPP)
4.4.b Bridge group names
4.4.c Parent selection
4.4.d Understand reconvergence
4.5 Utilize Cisco WCS for Mesh monitoring
4.5.a Add Mesh APs to map
4.5.b Utilize mesh tree view
4.5.c Utilize Cisco WCS mesh tools
4.5.d Generate Mesh reports
4.6 Utilize workgroup bridges
4.6.a Cisco WCS management for workgroup bridges
4.6.b Differences between workgroup and universal bridges
4.6.c Considerations for using workgroup bridges

18% 5.0 Implement Advanced Services and Manage with Cisco WCS and Navigator

5.1 Install and maintain Cisco WCS/Navigator and perform the following tasks
5.1.a Add Cisco WCS
5.1.b Add controllers
5.1.c Adding APs
5.1.d Adding maps
5.2 Describe Navigator’s role, features, and functions
5.3 Implement Cisco WCS partitioning and Navigator domains
5.4 Implement time of day AP power savings
5.5 Implement scheduled WLAN availability
5.6 Create and customize Cisco WCS reports
5.7 Configure background tasks
5.8 Configure and apply controller and access point templates
5.9 Monitor and convert autonomous APs
5.10 Configure WLC auto-provisioning
5.11 Utilize configuration auditing in Cisco WCS

Related resource: http://www.cisco.com/web/learning/exams/list/iuwms.html#~Topics

 

Posted on 506 Comments

642-747 IUWMS Online Test-Implementing Cisco Unified Wireless Mobility Services (IUWMS)

Currently, our 642-747 IUWMS online test only provide 20 questions. Answer one question correctly, you can get 5 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

[WATU 33]

 

cart