Posted on 2 Comments

cisco certified 642-457 cipt2 training

cisco certified 642-457 cipt2 training is available. This Cisco 642-457 CIPT2 exam tests a candidate’s skills in implementing a Cisco Unified Communications Manager solution in a multisite environment, applying a dial plan for a multisite environment, configuring survivability for remote sites during WAN failure, and implementing solutions to reduce bandwidth requirements in the IP WAN.

cisco certified 642-457 cipt2 training objectives are below.

12% 1.0 Describe and implement centralized call processing redundancy

1.1 Describe device fail over
1.2 Configure call survivability
1.3 Configure Cisco UnifiedSurvivable Remote Site Telephony operation
1.4 Configure Cisco Unified Communications Manager Express to provide redundancy
1.5 Configure MGCP Fallback operation
1.6 Verify redundancy operations

29% 2.0 Describe and configure a multi-site dial plan for Cisco Unified Communication Manager

2.1 Describe the issues with multi-site dial plans
2.2 Describe the differences between the various gateways and trunk types supported by Cisco Unified Communication Manager
2.3 Implement trunks
2.4 Describe globalized call routing
2.5 Implement a numbering plan for multisite topologies
2.6 Configure tailend hop off

Practice cisco certified 642-457 cipt2 training here.

 

Posted on 3 Comments

Share Cisco 642-457 CIPT2 Questions and Answers

It is easy for the candidates to pass Cisco 642-457 exam. Latest Cisco 642-457 CIPT2 questions and answers are available. The Associated Certification is CCNP Voice. There are 60-70 questions in real Cisco 642-457 CIPT2 exam, which will take the candidates 105 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 642-457 CIPT2 exam at Pearson VUE testing center.

Share Cisco 642-457 CIPT2 questions and answers below.

Which statement best describes globalized call routing in Cisco Unified Communications Manager?
A. All incoming calling numbers on the phones are displayed as an E.164 with the + prefix.
B. Call routing is based on numbers represented as an E.164 with the + prefix format.
C. All called numbers sent out to the PSTN are in E.164 with the + prefix format.
D. The CSS of all phones contain partitions assigned to route patterns that are in global format.
E. All phone directory numbers are configured as an E.164 with the + prefix.
Answer: B

When an incoming PSTN call arrives at an MGCP gateway, how does the calling number get normalized to a global E.164 number with the + prefix in Cisco Unified Communications Manager?
A. Normalization is done using translation patterns.
B. Normalization is done using route patterns.
C. Normalization is done using the gateway incoming called party prefixes based on number type.
D. Normalization is done using the gateway incoming calling party prefixes based on number type.
E. Normalization is achieved by local route group that is assigned to the MGCP gateway.
Answer: D

When an incoming PSTN call arrives at an MGCP gateway, how does the called number get normalized to an internal directory number in Cisco Unified Communications Manager?
A. Normalization is done by configuring the significant digits for inbound calls on the MGCP gateway.
B. Normalization is done using route patterns.
C. Normalization is done using the gateway incoming called party prefixes based on number type.
D. Normalization is done using the gateway incoming calling party prefixes based on number type.
E. Normalization is achieved by local route group that is assigned to the MGCP gateway.
Answer: A

Get more Cisco 642-457 CIPT2 questions and answers here.

 

 

 

Posted on

642-457 CIPT2 Implementing Cisco Unified Communications Manager, Part 2 v8.0

The Implementing Cisco Unified Communications Manager, Part 2 v8.0 (CIPT2 v8.0) 642-457 is the exam associated with the CCNP Voice certification. This Cisco 642-457 CIPT2 exam tests a candidate’s skills in implementing a Cisco Unified Communications Manager solution in a multisite environment, applying a dial plan for a multisite environment, configuring survivability for remote sites during WAN failure, and implementing solutions to reduce bandwidth requirements in the IP WAN.

Implementing Cisco Unified Communications Manager, Part 2 v8.0 is the exam name of 642-457 CIPT2 test. The Associated Certification is CCNP Voice. There are 60-70 questions in real Cisco 642-457 CIPT2 exam, which will take the candidates 105 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 642-457 CIPT2 exam at Pearson VUE testing center.

It is important for the candidates to know Cisco 642-457 CIPT2 exam topics.

12% 1.0 Describe and implement centralized call processing redundancy

1.1 Describe device fail over
1.2 Configure call survivability
1.3 Configure Cisco UnifiedSurvivable Remote Site Telephony operation
1.4 Configure Cisco Unified Communications Manager Express to provide redundancy
1.5 Configure MGCP Fallback operation
1.6 Verify redundancy operations

29% 2.0 Describe and configure a multi-site dial plan for Cisco Unified Communication Manager

2.1 Describe the issues with multi-site dial plans
2.2 Describe the differences between the various gateways and trunk types supported by Cisco Unified Communication Manager
2.3 Implement trunks
2.4 Describe globalized call routing
2.5 Implement a numbering plan for multisite topologies
2.6 Configure tailend hop off

21% 3.0 Implement call control discovery and Cisco Inter Company Media Exchange

3.1 Configure Service Advertisement Framework Forwarder
3.2 Configure Service Advertisement Framework Client Control
3.3 Configure Service Advertisement Framework Call Control Discovery

27% 4.0 Implement bandwidth management and Call Admission Control

4.1 Configure regions
4.2 Implement transcoders and MTPs
4.3 Configure locations
4.4 Implement RSVP agents
4.5 Implement SIP precondition
4.6 Describe functionality of a gatekeeper
4.7 Implement gatekeeper-based Call Admission Control
4.8 Configure Automated Alternate Routing
4.9 Configure multisite Music on Hold

11% 5.0 Implement mobility features

5.1 Configure Cisco Unified Communications Manager Device Mobility
5.2 Configure Cisco Extension Mobility

Posted on 571 Comments

642-457 CIPT2 Online Test-Implementing Cisco Unified Communications Manager, Part 2 v8.0 (CIPT2 v8.0)

Currently, our 642-457 CIPT2 online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

[WATU 28]

 

cart