Note:

  • Cisco 300-101 Route, 300-115 Switch and 300-075 CIPTV2 exam dumps have been updated on Apr.13, 2018.
  • New feedback from our customer, passed 200-150 DCICN exam with your dumps, thanks.
  • New Cisco 500-301 CCS, 700-265 and 500-551 exam dumps are available.

Tag Archives: Collaboration Edge (VCS Expressway)

23 Oct

300-075 CIPTV2 Online Test-Implementing Cisco IP Telephony & Video, Part 2 v1.0

Currently, our 300-075 CIPTV2 online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

Which parameter should be set to prevent H.323 endpoints from registering to Cisco TelePresence Video Communication Server automatically?

 
 
 
 

Which type of search message appears in the Cisco TelePresence Video Communication Server search history page when it receives a H.323 call from a RAS-enabled endpoint that originates from an external zone?

 
 
 
 
 

You want to avoid unnecessary interworking in Cisco TelePresence Video Communication Server, such as where a call between two H.323 endpoints is made over SIP, or vice versa. Which setting is recommended?

 
 
 
 
 

Which three statements about configuring an encrypted trunk between Cisco TelePresence Video Communication Server and Cisco Unified Communications Manager are true? (Choose three.)

 
 
 
 
 
 
 

Which two actions ensure that the call load from Cisco TelePresence Video Communication Server to a Cisco Unified Communications Manager cluster is shared across Unified CM nodes? (Choose two.)

 
 
 
 
 

Which two options are configuration steps on Cisco Unified Communications Manager that are used when integrating with VCS Expressway servers? (Choose two.)

 
 
 
 
 

Which two statements regarding IPv4 Static NAT address 209.165.200.230 has been configured on a VCS Expressway are true? (Choose two.)

 
 
 
 

Which configuration does Cisco recommend for the peer address on the Expressway-C secure traversal zone when the Expressway-E has one NIC enabled?

 
 
 
 

If delegated credentials checking has been enabled and remote workers can register to the VCS Expressway, which statement is true?

 
 
 
 

Which two options should be used to create a secure traversal zone between the Expressway-C and Expressway-E? (Choose two.)

 
 
 
 
 

Question 1 of 10

 

cart

 

23 Oct

300-075 CIPTV2 Implementing Cisco IP Telephony & Video, Part 2 v1.0

Implementing Cisco IP Telephony & Video, Part 2 v1.0 is the full name of 300-075 test, which is a hot one of CCNP collaboration certification. There are 55-65 questions in real Cisco 300-075 exam, which will take the candidates 75 minutes to complete the test. The Associated Certifications of Cisco 300-075 exam is CCNP Collaboration. The available language is English. Candidates can register Cisco 300-075 exam at Pearson VUE testing center.

Cisco 300-075 exam tests candidates seeking CCNP Collaboration on their ability for implementing a Cisco Unified Collaboration solution in a multisite environment. It is helpful for the candidates to know Cisco 300-075 exam topics.

1.0 VCS Control 17%

1.1 Configure registration of devices
1.2 Explore the fundamentals of subzones
1.3 Describe zone plans for VCS
1.4 Describe and configure traversal zones
1.5 Describe the benefits and configuration of transforms and create call policies
1.6 Explore VCS searches for endpoints
1.7 Integrating LDAP
1.8 Explain DNS and SRV records and document requirements for SRV records
1.9 Describe how clustering and replication works and configure a cluster
1.10 Configure interworking with VCS
1.11 Configure H.323 (including gatekeeper) and SIP
1.12 Configure trunking

2.0 Collaboration Edge (VCS Expressway) 12%

2.1 Identify and configure the requirements when deploying a collaboration edge
2.2 Establish a relationship between C/Expressway E and CUCM
2.3 Document and produce requirements for firewall and NAT configuration
2.4 Describe and implement privacy and security controls for external devices and calls
2.5 Describe elements in a traversal call (H.460 and Assent)

3.0 Configure CUCM Video Service Parameters 9%

3.1 Configure DSCP
3.2 Configuring clusterwide parameters system QoS

4.0 Describe and Implement Centralized Call Processing Redundancy 10%

4.1 Describe device fail over
4.2 Configure call survivability
4.3 Configure Cisco Unified Survivable Remote Site Telephony operation
4.4 Verify redundancy operations

5.0 Describe and Configure a Multi-site Dial Plan for Cisco Unified Communications Manager 17%

5.1 Describe the issues with multi-site dial plans
5.2 Describe the differences between the various gateways and trunk types supported by Cisco Unified Communication Manager
5.3 Implement trunks to VCS
5.4 Describe globalized call routing based on URI dial plans and ILS
5.5 Implement a numbering plan for multi-site topologies

6.0 Implement Call Control Discovery/ILS 14%

6.1 Configure Service Advertisement Framework Forwarder
6.2 Configure Service Advertisement Framework Client Control
6.3 Configure Service Advertisement Framework Call Control Discovery
6.4 Configure URI calling
6.5 Configure ILS network
6.6 Configure Global Dial Plan Replication

7.0 Implement Video Mobility Features 9%

7.1 Configure extension mobility, and device mobility
7.2 Configure unified mobility (including video)

8.0 Implement Bandwidth Management and Call Admission Control on CUCM 12%

8.1 Configure regions
8.2 Implement transcoders and MTPs
8.3 Configure locations CAC and Enhanced CAC
8.4 Correlate events based on traces, logs, debugs and output of monitoring tools
8.5 Parse and interpret traces, logs, debugs and output of monitoring tools

 


Recent Posts


Tags

300-101 ROUTE and/or Remove an End-Device and/or Remove an Infrastructure Device and/or Remove Cables (network and/or power) Cisco 642-997 DCUFI exam Cisco 642-999 DCUCI exam Configure Cisco Unity Connection Configure Cisco Unity Express using the GUI Describe and implement centralized call processing redundancy Describe Data Center Structure and Modularity Describe the Design Methodology Describe the Technologies used within the Data Center Describe WLAN Fundamentals Design and Deploy WLAN Infrastructure for Mobility Design Network Management Considerations into a Data Center Design the Access Layer of a Data Center General Networking Knowledge given a Network Design and a set of Requirements High Availability Routing Features Identify Cisco Equipment and Related Hardware Implement high availability features on Cisco Unified Fabric products in a Cisco Data Center Architecture Implement Multicast over Wireless Implement QoS for Wireless Applications Implement VoWLAN Infrastructure Security Infrastructure Services Install Integrate Client Device Security IP Services LAN Switching Technologies Layer 2 Technologies Layer 3 Technologies Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices Manage the Unified Fabric in a Cisco Data Center Architecture Monitoring and Reporting Tools Network Principles Replace Service-Related Knowledge Threat Defense Threat Defense Architectures Troubleshoot Call Setup Issues Troubleshooting Troubleshoot Registration Issues VPN Technologies WAN Technologies

Links

Powered by CCNP Exams Test Base