Posted on 3 Comments

cisco 300-206 senss boot camp training

cisco 300-206 senss boot camp training is available. The Implementing Cisco Edge Network Security (SENSS) (300-206) exam tests the knowledge of a network security engineer to configure and implement security on Cisco network perimeter edge devices such as a Cisco switch, Cisco router, and Cisco ASA firewall.

This 90-minute 300-206 senss exam consists of 65-75 questions and focuses on the technologies used to strengthen security of a network perimeter such as Network Address Translation (NAT), ASA policy and application inspect, and a zone-based firewall on Cisco routers. Below are the details of Cisco 300-206 senss exam objectives.

25% 2.0 Cisco Security Devices GUIs and Secured CLI Management

2.1 Implement SSHv2, HTTPS, and SNMPv3 access on the network devices
2.2 Implement RBAC on the ASA/IOS using CLI and ASDM
2.3 Describe Cisco Prime Infrastructure
2.3.a Functions and use cases of Cisco Prime
2.3.b Device Management
2.4 Describe Cisco Security Manager (CSM)
2.4.a Functions and use cases of CSM
2.4.b Device Management
2.5 Implement Device Managers
2.5.a Implement ASA firewall features using ASDM

12% 3.0 Management Services on Cisco Devices

3.1 Configure NetFlow exporter on Cisco Routers, Switches, and ASA
3.2 Implement SNMPv3
3.2.a Create views, groups, users, authentication, and encryption
3.3 Implement logging on Cisco Routers, Switches, and ASA using Cisco best practices
3.4 Implement NTP with authentication on Cisco Routers, Switches, and ASA
3.5 Describe CDP, DNS, SCP, SFTP, and DHCP
3.5.a Describe security implications of using CDP on routers and switches
3.5.b Need for dnssec

Practice cisco 300-206 senss boot camp training here.

 

 

Posted on

cisco certification 300-206 senss kits

cisco certification 300-206 senss kits are available for the candidates to prepare the test well. The Associated Certification is CCNP Security. There are 65-75 questions in real Cisco 300-206 SENSS exam, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 300-206 SENSS exam at Pearson VUE testing center.

Share cisco certification 300-206 senss kits below.

Which tool provides the necessary information to determine hardware lifecycle and compliance details for deployed network devices?
A. Prime Infrastructure
B. Prime Assurance
C. Prime Network Registrar
D. Prime Network Analysis Module
Answer: A

Which three compliance and audit report types are available in Cisco Prime Infrastructure? (Choose three.)
A. Service
B. Change Audit
C. Vendor Advisory
D. TAC Service Request
E. Validated Design
F. Smart Business Architecture
Answer: A,B,C

Cisco Security Manager can manage which three products? (Choose three.)
A. Cisco IOS
B. Cisco ASA
C. Cisco IPS
D.Cisco WLC
E. Cisco Web Security Appliance
F. Cisco Email Security Appliance
G. Cisco ASA CX
H. Cisco CRS
Answer: A,B,C

Get more cisco certification 300-206 senss kits here. 

 

 

Posted on

300-206 SENSS Implementing Cisco Edge Network Security Solutions

The Implementing Cisco Edge Network Security (SENSS) (300-206) exam tests the knowledge of a network security engineer to configure and implement security on Cisco network perimeter edge devices such as a Cisco switch, Cisco router, and Cisco ASA firewall. This 90-minute exam consists of 65-75 questions and focuses on the technologies used to strengthen security of a network perimeter such as Network Address Translation (NAT), ASA policy and application inspect, and a zone-based firewall on Cisco routers.

Implementing Cisco Edge Network Security Solutions is the full name of 300-206 SENSS. The Associated Certification is CCNP Security. There are 65-75 questions in real Cisco 300-206 SENSS exam, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 300-206 SENSS exam at Pearson VUE testing center.

Cisco 300-206 SENSS exam topics cover the following sections, which are valuable in your preparation.

25% 1.0 Threat Defense

1.1 Implement firewall (ASA or IOS depending on which supports the implementation)
1.1.a Implement ACLs
1.1.b Implement static/dynamic NAT/PAT
1.1.c Implement object groups
1.1.d Describe threat detection features
1.1.e Implement botnet traffic filtering
1.1.f Configure application filtering and protocol inspection
1.1.g Describe ASA security contexts
1.2 Implement Layer 2 security
1.2.a Configure DHCP snooping
1.2.b Describe dynamic ARP inspection
1.2.c Describe storm control
1.2.d Configure port security
1.2.e Describe common Layer 2 threats and attacks and mitigation
1.2.f Describe MACSec
1.2.g Configure IP source verification
1.3 Configure device hardening per best practices
1.3.a Routers
1.3.b Switches
1.3.c Firewalls

25% 2.0 Cisco Security Devices GUIs and Secured CLI Management

2.1 Implement SSHv2, HTTPS, and SNMPv3 access on the network devices
2.2 Implement RBAC on the ASA/IOS using CLI and ASDM
2.3 Describe Cisco Prime Infrastructure
2.3.a Functions and use cases of Cisco Prime
2.3.b Device Management
2.4 Describe Cisco Security Manager (CSM)
2.4.a Functions and use cases of CSM
2.4.b Device Management
2.5 Implement Device Managers
2.5.a Implement ASA firewall features using ASDM

12% 3.0 Management Services on Cisco Devices

3.1 Configure NetFlow exporter on Cisco Routers, Switches, and ASA
3.2 Implement SNMPv3
3.2.a Create views, groups, users, authentication, and encryption
3.3 Implement logging on Cisco Routers, Switches, and ASA using Cisco best practices
3.4 Implement NTP with authentication on Cisco Routers, Switches, and ASA
3.5 Describe CDP, DNS, SCP, SFTP, and DHCP
3.5.a Describe security implications of using CDP on routers and switches
3.5.b Need for dnssec

10% 4.0 Troubleshooting, Monitoring and Reporting Tools

4.1 Monitor firewall using analysis of packet tracer, packet capture, and syslog
4.1.a Analyze packet tracer on the firewall using CLI/ASDM
4.1.b Configure and analyze packet capture using CLI/ASDM
4.1.c Analyze syslog events generated from ASA

16% 5.0 Threat Defense Architectures

5.1 Design a Firewall Solution
5.1.a High-availability
5.1.b Basic concepts of security zoning
5.1.c Transparent & Routed Modes
5.1.d Security Contexts
5.2 Layer 2 Security Solutions
5.1.a Implement defenses against MAC, ARP, VLAN hopping, STP, and DHCP rogue attacks
5.1.b Describe best practices for implementation
5.1.c Describe how PVLANs can be used to segregate network traffic at Layer 2

12% 6.0 Security Components and Considerations

6.1 Describe security operations management architectures
6.1.a Single device manager vs. multi-device manager
6.2 Describe Data Center security components and considerations
6.2.a Virtualization and Cloud security
6.3 Describe Collaboration security components and considerations
6.3.a Basic ASA UC Inspection features
6.4 Describe common IPv6 security considerations
6.4.a Unified IPv6/IPv4 ACL on the ASA

Posted on 659 Comments

300-206 SENSS Online Test-Implementing Cisco Edge Network Security Solutions

Currently, our 300-206 SENSS online test only provide 20 questions. Answer one question correctly, you can get 5 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

[WATU 15]

 

cart