Posted on

cisco 642-747 iuwms training certification

642-747 iuwms exam is a required one for Cisco CCNP Wireless certification. Besides, in order to get CCNP Wireless certification, 642-732 CUWSS, 642-742 IUWVN and 642-737 IAUWS exam are also required to pass.

Now, cisco 642-747 iuwms training certification is available for the candidates to prepare the test. Share some questions of Cisco 642-747 iuwms exam.

Controllers WLC_1 and WLC_2 are in different mobility domains. A wireless client that has the same VLAN interface roams from WLC_1 to WLC_2. What happens to the client roaming?
A. The client context is deleted in controller WLC_1, and a new client context is created in WLC_2 to become the anchor controller. B. The client context is moved from controller WLC_1 to controller WLC_2. The result is that the WLC_1 client context is deleted and WLC_2 becomes the anchor controller.
C. The client context is copied from controller WLC_1 to controller WLC_2. The result is that WLC_1 becomes the anchor controller and WLC_2 becomes the foreign controller.
D. The client context is copied from controller WLC_1 to controller WLC_2. The result is that WLC_1 becomes the foreign controller and WLC_2 becomes the anchor controller.
Answer: A

cart

 

CCNP Wireless certification addresses the need for designing, implementing, and operating Cisco Wireless networks and mobility infrastructures. CCNP Wireless certification emphasizes wireless networking principles and theory.

Cisco professional level certifications (CCDP, CCNP, CCSP, CCIP, CCVP, CCNP SP Operations, CCNP Wireless) are valid for three years.

 

Posted on 3 Comments

cisco certification 642-747 iuwms programs

cisco certification 642-747 iuwms programs are available now. This Cisco 642-747 IUWMS exam assesses a candidate’s capability to integrate mobility services into the WLAN, to tune and troubleshoot the WLAN, and to implement indoor enterprise mesh networks.

cisco certification 642-747 iuwms programs exam objectives below.

20% 1.0 Describe WLAN Fundamentals

1.1 Describe the impact of distributed antenna systems (DAS) for location-based services
1.2 Tracking mobile clients
1.2.a Active radio frequency identification (RFID) tag
1.2.b Wi-Fi devices
1.2.c Active interferers
1.3 Describe the applications of RFID, Chokepoint, and TDoA Tags
1.3.a Compare and contrast Cisco Wireless Control System (Cisco WCS) and third-party applications
1.4 Calibrate Received Signal Strength Indicator (RSSI) for the Cisco and third-party implementation
1.5 Configure, generate, and interpret location and event notifications
1.6 Configure and tune the Mobility Services Engine (for example, Simple Network Management Protocol (SNMP) impact on network traffic and platform hardware)
1.6.a NMSP
1.7 Design access point (AP)/antenna deployment model for location
1.8 Describe location techniques
1.8.a Angulations
1.8.b Cell of origin
1.8.c TDoA/ToA Lateration
1.8.d RSS Lateration
1.8.e Pattern Recognition
1.8.f RF Fingerprinting

23% 2.0 Design and Deploy WLAN Infrastructure for Mobility

2.1 Configure single Service Set Identifier (SSID) designs w/mobility
2.1.a AP group VLANs
2.1.b Identity Based Networking (IBN)
2.1.c Single SSID/Multiple WLAN
2.2 Analyze implications of L2 and L3 roaming
2.2.a Avoid salt and pepper
2.2.b Minimize intercontroller roaming
2.2.c Mobility tunneling
2.3 Implement high availability
2.3.a Legacy primary, secondary, and tertiary
2.3.b Backup primary and backup secondary outside of mobility group
2.3.c Enhanced timers
2.3.d AP fallback
2.3.e AP prioritization
2.3.f Anchor controller redundancy
2.3.g RF redundancy – coverage hole, RRM, and double AP
2.4 Troubleshoot AP join process using the following solutions
2.4.a AP console debug
2.4.b AP console config
2.4.c WLC debug
2.4.d WLC logs
2.4.e Switchport, DHCP, and VLAN
2.5 Implement the following Cisco Unified Wireless best practices
2.5.a LAG vs. Port-based
2.5.b RF groups
2.5.c H-REAP
2.5.d AP count; per-subnet limitation
2.5.e Client subnet sizing considerations
2.5.f Per WLAN client limit
2.5.g Office Extend
2.5.h Passive client
2.6 Define and implement mobility groups/list
2.6.a AP regulatory domain flexibility
2.6.b 24/48/72 WLC mobility size
2.7 Adjust authentication/EAP timers
2.8 Tune RF environment for context aware services
2.8.a Data rates
2.8.b Transmit power levels and thresholds
2.8.c Channels and DCA
2.8.d Band Select
2.8.e ClientLink
2.9 Troubleshooting intercontroller communications
2.9.a Mobility group formation
2.9.b RF group formation
2.9.c Intercontroller roaming

Practice cisco certification 642-747 iuwms programs here. 

 

 

Posted on

Share Cisco 642-747 IUWMS Questions and Answers

Cisco 642-747 IUWMS questions and answers are available, which are useful in your preparation. 642-747 IUWMS is known as Implementing Cisco Unified Wireless Mobility Services. The Associated Certification is CCNP Wireless. There are 50-60 questions in real Cisco 642-747 IUWMS test, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 642-747 IUWMS exam at Pearson VUE testing center.

Share some Cisco 642-747 IUWMS questions and answers below.

Which ports would require unrestricted port access for CleanAir RF spectrum analysis between the AP and Cisco Spectrum Expert?
A. UDP 5246 and 5247
B. TCP 5246 and 5247
C. UDP 16113 and 16114
D. TCP 16113 and 16114
E. TCP 37540 and 37550
F. UDP 37540 and 37550
Answer: E

A Cisco WLC v7.0 is not seeing an AP join. Which starting prefix debug command can help determine a combination of discovery/join and DHCP process status?
A. debug capwap events – from Cisco WLC
B. debug capwap events – from the AP
C. debug ip udp – from Cisco WLC
D. debug ip udp – from the AP
Answer: D

What is the recommendation for the maximum number of APs per VLAN?
A. 20 to 40
B. 40 to 60
C. 60 to 80
D. 80 to 100
E. 100 to 120
Answer: C

Get more Cisco 642-747 IUWMS questions and answers here.

 

 

 

Posted on

642-747 IUWMS Implementing Cisco Unified Wireless Mobility Services

The IUWMS Implementing Cisco Unified Wireless Mobility Services exam is the exam associated with the CCNP Wireless certification. This Cisco 642-747 IUWMS exam assesses a candidate’s capability to integrate mobility services into the WLAN, to tune and troubleshoot the WLAN, and to implement indoor enterprise mesh networks.

642-747 IUWMS is known as Implementing Cisco Unified Wireless Mobility Services. The Associated Certification is CCNP Wireless. There are 50-60 questions in real Cisco 642-747 IUWMS test, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 642-747 IUWMS exam at Pearson VUE testing center.

Below are the details of Cisco 642-747 IUWMS exam topics.

20% 1.0 Describe WLAN Fundamentals

1.1 Describe the impact of distributed antenna systems (DAS) for location-based services
1.2 Tracking mobile clients
1.2.a Active radio frequency identification (RFID) tag
1.2.b Wi-Fi devices
1.2.c Active interferers
1.3 Describe the applications of RFID, Chokepoint, and TDoA Tags
1.3.a Compare and contrast Cisco Wireless Control System (Cisco WCS) and third-party applications
1.4 Calibrate Received Signal Strength Indicator (RSSI) for the Cisco and third-party implementation
1.5 Configure, generate, and interpret location and event notifications
1.6 Configure and tune the Mobility Services Engine (for example, Simple Network Management Protocol (SNMP) impact on network traffic and platform hardware)
1.6.a NMSP
1.7 Design access point (AP)/antenna deployment model for location
1.8 Describe location techniques
1.8.a Angulations
1.8.b Cell of origin
1.8.c TDoA/ToA Lateration
1.8.d RSS Lateration
1.8.e Pattern Recognition
1.8.f RF Fingerprinting

23% 2.0 Design and Deploy WLAN Infrastructure for Mobility

2.1 Configure single Service Set Identifier (SSID) designs w/mobility
2.1.a AP group VLANs
2.1.b Identity Based Networking (IBN)
2.1.c Single SSID/Multiple WLAN
2.2 Analyze implications of L2 and L3 roaming
2.2.a Avoid salt and pepper
2.2.b Minimize intercontroller roaming
2.2.c Mobility tunneling
2.3 Implement high availability
2.3.a Legacy primary, secondary, and tertiary
2.3.b Backup primary and backup secondary outside of mobility group
2.3.c Enhanced timers
2.3.d AP fallback
2.3.e AP prioritization
2.3.f Anchor controller redundancy
2.3.g RF redundancy – coverage hole, RRM, and double AP
2.4 Troubleshoot AP join process using the following solutions
2.4.a AP console debug
2.4.b AP console config
2.4.c WLC debug
2.4.d WLC logs
2.4.e Switchport, DHCP, and VLAN
2.5 Implement the following Cisco Unified Wireless best practices
2.5.a LAG vs. Port-based
2.5.b RF groups
2.5.c H-REAP
2.5.d AP count; per-subnet limitation
2.5.e Client subnet sizing considerations
2.5.f Per WLAN client limit
2.5.g Office Extend
2.5.h Passive client
2.6 Define and implement mobility groups/list
2.6.a AP regulatory domain flexibility
2.6.b 24/48/72 WLC mobility size
2.7 Adjust authentication/EAP timers
2.8 Tune RF environment for context aware services
2.8.a Data rates
2.8.b Transmit power levels and thresholds
2.8.c Channels and DCA
2.8.d Band Select
2.8.e ClientLink
2.9 Troubleshooting intercontroller communications
2.9.a Mobility group formation
2.9.b RF group formation
2.9.c Intercontroller roaming

22% 3.0 Implement MSE Architecture

3.1 Describe Cisco Mobility Services Engine (MSE) capabilities and integration with wireless network architecture
3.1.a Context aware
3.1.b Adaptive wireless intrusion prevention system (IPS)
3.1.c Guest tracking
3.1.d Spectrum intelligence
3.1.e Scalability
3.2 Deploy context-aware services for specific environments
3.2.a Mixed-use environments
3.2.b Complex RF environments
3.2.c Small areas
3.2.d Timing issues
3.2.e Adjusting history and location parameters
3.2.f Multifloor facilities
3.2.g Re-calibration
3.3 Integrate third-party applications
3.3.a Server engines
3.3.b Licensing
3.3.c Common API
3.4 Integrate and manage MSE with Cisco WCS
3.4.a Install and Synchronize
3.4.b Location
3.4.c Enable tracking
3.4.d Define the MSE parameters
3.4.e Understand advanced parameters
3.5 Maintain MSE
3.5.a Database clean-up
3.5.b Database back-up and restore
3.5.c Upgrade
3.6 Troubleshoot MSE operations
3.6.a Debug of Network Mobility Services Protocol (NMSP)
3.6.b Debug of controller
3.6.c Location accuracy tool
3.6.d Debug RFID

17% 4.0 Implement and Manage Indoor and Outdoor Mesh

4.1 Describe wireless Mesh and its benefits
4.2 Describe the following Mesh operation modes:
4.2.a RAP
4.2.b MAP
4.2.c Ethernet bridge functionality for Mesh
4.3 Implement Mesh
4.3.a Hop count
4.3.b Backhaul caveats (throughput rates, QoS, path properties)
4.3.c Secondary backhaul
4.3.d SAP authorization (MAC filter entry)
4.3.e Utilize WLC CLI
4.3.f Outdoor RF considerations
4.4 Describe Mesh convergence
4.4.a Cisco adaptive wireless path protocol (AWPP)
4.4.b Bridge group names
4.4.c Parent selection
4.4.d Understand reconvergence
4.5 Utilize Cisco WCS for Mesh monitoring
4.5.a Add Mesh APs to map
4.5.b Utilize mesh tree view
4.5.c Utilize Cisco WCS mesh tools
4.5.d Generate Mesh reports
4.6 Utilize workgroup bridges
4.6.a Cisco WCS management for workgroup bridges
4.6.b Differences between workgroup and universal bridges
4.6.c Considerations for using workgroup bridges

18% 5.0 Implement Advanced Services and Manage with Cisco WCS and Navigator

5.1 Install and maintain Cisco WCS/Navigator and perform the following tasks
5.1.a Add Cisco WCS
5.1.b Add controllers
5.1.c Adding APs
5.1.d Adding maps
5.2 Describe Navigator’s role, features, and functions
5.3 Implement Cisco WCS partitioning and Navigator domains
5.4 Implement time of day AP power savings
5.5 Implement scheduled WLAN availability
5.6 Create and customize Cisco WCS reports
5.7 Configure background tasks
5.8 Configure and apply controller and access point templates
5.9 Monitor and convert autonomous APs
5.10 Configure WLC auto-provisioning
5.11 Utilize configuration auditing in Cisco WCS

Related resource: http://www.cisco.com/web/learning/exams/list/iuwms.html#~Topics