010-151 DCTECH Online Test-Cisco Certified Technician (CCT) for Data Center

Currently, our 010-151 DCTECH online test only provide 20 questions. Answer one question correctly, you can get 5 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

Which two commands allow you to view the state of high availability between the two clustered Fabric Interconnects? (Choose two.)

show cluster state extended

show cluster extended-state

show cluster HA status

show cluster state

Which three firmware components does the Host Upgrade Utility upgrade? (Choose three.)

Fabric Interconnect firmware

LAN on Motherboard

Cisco UCS Manager

CIMC

System BIOS

After installation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot.Which four options should be verified? (Choose four.)

Verify the power source to the equipment.

Check for loose HDD cables.

Reseat the DIMMs, CPU, and PCI cards.

Verify that power supplies are receiving power.

Reseat the mezzanine card connector.

Check the CPU sockets for bent pins.

Check the Cisco IMC for fan faults.

How many 10GBASE-T port licenses are preinstalled on a Cisco Nexus 3064-32T?

Which type of optics module is supported by a 6-port 40 GE Cisco Nexus 7000 M2 Series I/O module?

CPAK

QSFP+

SFP/SFP+

CFP

Which two Cisco Nexus switches provide the foundation of the Cisco Application Centric Infrastructure? (Choose two.)

Cisco Nexus 7718 switch

Cisco Nexus 9508 switch

Cisco Nexus 7710 switch

Cisco Nexus 93128TX switch

Cisco Nexus 6004 switch

Which two statements about the Cisco Nexus 5596UP switch are true? (Choose two.)

Its power supplies and fan trays are hot-swappable.

It supports unified ports.

It is offered in a one-rack-unit form factor.

It has one expansion slot.

It supports up to 96 10G BASE-T ports.

What is the maximum distance that the 40GBASE-LR4 Ethernet standard can span?

550 m

10 km

40 km

80 km

Up to what speed can Category 5e UTP cable transmit data?

10 Mb/s

100 Mb/s

1000 Mb/s

10000 Mb/s

Up to what speed can Category 5 UTP cable transmit data?

10 Mb/s

100 Mb/s

1000 Mb/s

10000 Mb/s

When a host firmware package policy is created, what must it be associated with to upgrade the BIOS?

blade or blade pool

service profile

boot policy

service template

Which three statements about FCoE are true? (Choose three.)

Allows Fibre Channel and Ethernet networks to share a single, integrated infrastructure.

Encapsulates Fibre Channel frames into Ethernet frames, which allows them to run alongside traditional IP traffic.

Increases capital costs due to the difficulty to manage.

Consolidates I/O traffic in the data center.

Which two statements about PCIe are true? (Choose two.)

The PCIe link is built around dedicated unidirectional couples of serial, point-to-point connections known as lanes.

You can install a PCI Express x8 adapter into an x4 slot.

The PCIe standard is a bus-based system in which all the devices share the same bidirectional, 32-bit or 64-bit, parallel signal path.

The PCIe 1.0 standard doubles the transfer rate compared to PCIe 2.0.

A link that is composed of four lanes is called an x4 link.

What is the wire transmission speed for 100GBASE-ER4 Ethernet?

100 Mb/s

1 Gb/s

10 Gb/s

100 Gb/s

Which two statements about the Ethernet media are true? (Choose two.)

A twisted-pair cable system has each pair of wires twisted together to reduce electromagnetic interference.

Compared to multimode fiber, the single-mode fiber is designed for shorter distances with higher cost.

40 Gigabit Ethernet twinax cables deploy Enhanced Quad Small Form Factor Pluggable (QSFP+) connectors.

The twinax cables can be found in either a shielded twisted-pair or an unshielded twisted-pair variation.

Which type of connection across the network does a SAN allow for multiple servers to access an unlimited amount of storage devices?

any-to-many

many-to-any

any-to-any

any-to-one

one-to-any

one-to-one

Which fiber optic cable type is used most often with a Subscriber connector?

dual-mode

single-mode

straight-mode

multi-mode

subscriber-mode

The Ethernet specification details several different fiber optic media types. What is the wire transmission speed for 100BASE-FX Ethernet?

10 Mb/s

100 Mb/s

1000 Mb/s

10000 Mb/s

Which important feature on the front end is provided to the clients by multiple servers that access the same storage devices across the SAN?

recovery

redundancy

resiliency

security

storage

Which method does FCIP use to enable connectivity of geographically distributed Fibre Channel SANs over IP?

routing

tunneling

handshaking

transporting

Question 1 of 20

CCNP Exams Test Base

New CCNP Exams from January 30, 2015

Note:

Tag Archives: 010-151 DCTECH online test

Recent Posts

Tags

Links