Note:

  • Cisco 300-101 Route, 300-115 Switch and 300-075 CIPTV2 exam dumps have been updated on Apr.13, 2018.
  • New feedback from our customer, passed 200-150 DCICN exam with your dumps, thanks.
  • New Cisco 500-301 CCS, 700-265 and 500-551 exam dumps are available.

Category Archives: 642-447 CIPT1 Exam

04 1月

ccnp 642-447 cipt1 self study guide

642-447 cipt1 exam is a required one for CCNP Voice certification. ccnp 642-447 cipt1 self study guide is available for the candidates to clear the test. Besides, 642-437 CVOICE, 642-457 CIPT2, 642-427 TVOICE and 642-467 CAPPS are also required exams for CCNP Voice certification.

The CCNP Voice focuses on Cisco Unified Communications Manager (formerly Unified CallManager), quality of service (QoS), gateways, gatekeepers, IP phones, voice applications, and utilities on Cisco routers and Cisco Catalyst switches.

Share ccnp 642-447 cipt1 self study guide below.

If an IP phone loses connectivity with its primary server and registers with its backup server, what happens when connectivity to the primary server is restored?
A. The IP phone will try to re-establish a connection to the primary server every 90 seconds.
B. The IP phone will continuously try to re-establish a connection with the primary server; if successful, the IP phone will re-register with the primary.
C. Once the IP phone registers with the backup server, the administrator will need to reset the IP phone for it to re-register with the primary server.
D. Once connectivity is re-established with the primary server, the IP phone will wait until there have been three successful TCP keepalive exchanges before it will re-register with the primary server.
Answer: B

 

cart

05 11月

ccnp 642-447 cipt1 exam preparation

ccnp 642-447 cipt1 exam preparation is available. Cisco 642-447 CIPT1 exam tests a candidate’s skills in installing and configuring a Cisco Unified Communications Manager solution in a single site and focuses primarily on Cisco Unified Communications Manager Release v8.0, the call routing and signaling component for the Cisco Unified Communications solution.

ccnp 642-447 cipt1 exam preparation objectives are below.

22% 1.0 Perform initial setup of a Cisco Unified Communications Manager cluster

1.1 Describe Cisco Unified Communications Manager cluster architecture
1.2 Describe Cisco Unified Communications Manager redundancy designs
1.3 Describe the requirements for Cisco Unified Communications Manager use of DHCP, TFTP, DNS, and NTP
1.4 Determine the services necessary to support a Cisco Unified Communications Manager deployment and activate the appropriate services

17% 2.0 Describe and configure Cisco Unified Communications Manager to support on-cluster calling

2.1 Configure a Cisco Unified Communications Manager group
2.2 Configure Cisco Unified Communications Manager profiles and device pools
2.3 Configure Cisco Unified Communications Manager templates
2.4 Manage phones and users using Cisco Unified Communications Manager Bulk Administration Tool
2.5 Describe the tool for Auto-Registered Phones Support functionality

Practice ccnp 642-447 cipt1 exam preparation here. 

 

 

27 9月

Cisco 642-447 CIPT1 Practice Test Questions

Cisco 642-447 CIPT1 practice test questions are available now. The Associated Certification is CCNP Voice. There are 60-70 questions in real Cisco 642-447 CIPT1 test, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 642-447 CIPT1 exam at Pearson VUE testing center.

Share Cisco 642-447 CIPT1 practice test questions below.

What is the maximum number of call processing servers supported in a single cluster?
A. 5
B. 8
C. 10
D. 12
E. 20
F. 24
Answer: B

If an IP phone loses connectivity with its primary server and registers with its backup server, what happens when connectivity to the primary server is restored?
A. The IP phone will try to re-establish a connection to the primary server every 90 seconds.
B. The IP phone will continuously try to re-establish a connection with the primary server; if successful, the IP phone will re-register with the primary.
C. Once the IP phone registers with the backup server, the administrator will need to reset the IP phone for it to re-register with the primary server.
D. Once connectivity is re-established with the primary server, the IP phone will wait until there have been three successful TCP keepalive exchanges before it will re-register with the primary server.
Answer: B

What happens when the TFTP server is not available?
A. CUCM can’t read phone configurations
B. Phones can’t download configuration
C. Phones need to be restarted
D. TFTP server needs to be restarted
Answer: B

Get more Cisco 642-447 CIPT1 practice test questions here. 

 

 

 

01 9月

642-447 CIPT1 Implementing Cisco Unified Communications Manager, Part 1

The Implementing Cisco Unified Communications Manager, Part 1 v8.0 (CIPT1 v8.0) 642-447 is the exam associated with the CCNP Voice certification. This Cisco 642-447 CIPT1 exam tests a candidate’s skills in installing and configuring a Cisco Unified Communications Manager solution in a single site and focuses primarily on Cisco Unified Communications Manager Release v8.0, the call routing and signaling component for the Cisco Unified Communications solution.

Implementing Cisco Unified Communications Manager, Part 1 is the exam name of 642-447 CIPT1 test. The Associated Certification is CCNP Voice. There are 60-70 questions in real Cisco 642-447 CIPT1 test, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 642-447 CIPT1 exam at Pearson VUE testing center.

Cisco 642-447 CIPT1 exam topics cover the following sections.

22% 1.0 Perform initial setup of a Cisco Unified Communications Manager cluster

1.1 Describe Cisco Unified Communications Manager cluster architecture
1.2 Describe Cisco Unified Communications Manager redundancy designs
1.3 Describe the requirements for Cisco Unified Communications Manager use of DHCP, TFTP, DNS, and NTP
1.4 Determine the services necessary to support a Cisco Unified Communications Manager deployment and activate the appropriate services

17% 2.0 Describe and configure Cisco Unified Communications Manager to support on-cluster calling

2.1 Configure a Cisco Unified Communications Manager group
2.2 Configure Cisco Unified Communications Manager profiles and device pools
2.3 Configure Cisco Unified Communications Manager templates
2.4 Manage phones and users using Cisco Unified Communications Manager Bulk Administration Tool
2.5 Describe the tool for Auto-Registered Phones Support functionality

30% 3.0 Describe and configure a route plan for Cisco Unified Communications Manager to support off-net calling

3.1 Describe Cisco Unified Communications Manager digit analysis
3.2 Implement gateways
3.3 Configure route patterns
3.4 Configure route lists and route groups
3.5 Implement toll-fraud prevention
3.6 Configure digit manipulation
3.7 Describe the functions and usage of calling search spaces and partitions
3.8 Implement calling privileges

25% 4.0 Describe and configure Cisco Unified Communications Manager media resources

4.1 Describe media resources
4.2 Configure MeetMe conferencing and software conferencing resources
4.3 Configure Music on Hold
4.4 Configure Media Resource Groups and Media Resource Group Lists

6% 5.0 Describe and configure the Cisco Unified Communications Manager to support features and applications

5.1 Configure IP phone services
5.2 Configure Cisco Unified Communications Manager native presence features

07 8月

642-447 CIPT1 Online Test-Implementing Cisco Unified Communications Manager, Part 1 v8.0 (CIPT1 v8.0)

Currently, our 642-447 CIPT1 online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

What happens when the TFTP server is not available?

 
 
 
 

If an IP phone loses connectivity with its primary server and registers with its backup server, what happens when connectivity to the primary server is restored?

 
 
 
 

What is the maximum number of call processing servers supported in a single cluster?

 
 
 
 
 
 

What are the three characteristics that govern the type of Cisco Unified Communications Manager deployment model? (Choose three.)

 
 
 
 
 
 

The Cisco Unified Communications architecture supports which three technologies? (Choose three.)

 
 
 
 
 
 

When a new subscriber is added to a Cisco Unified Communications Manager cluster, how must the subscriber be configured so that is can receive database updates?

 
 
 
 

Which two services need to be activated on a Cisco Unified Communications Manager for it to function as the publisher in a cluster? (Choose two.)

 
 
 
 
 

The Ajax Corporation is designing an IP telephony network using Cisco MCS 7845 Series servers, each one capable of supporting 7500 devices. The design must meet these requirements: – be cost-effective – support up to 7500 phones – provide a minimal level of redundancy Which configuration will meet Ajax Corporation needs?

 
 
 
 

What is one of the features of deploying Cisco Unified Communications Manager servers in a 1:1 redundancy design?

 
 
 
 

In a Cisco Unified Communications Manager 8.0 cluster, how is database replication accomplished for run-time data?

 
 
 
 

Question 1 of 10

 

cart

 

 

 

 

 

Recent Posts

Tags

300-101 ROUTE and/or Remove an End-Device and/or Remove an Infrastructure Device and/or Remove Cables (network and/or power) Cisco 642-997 DCUFI exam Cisco 642-999 DCUCI exam Configure Cisco Unity Connection Configure Cisco Unity Express using the GUI Describe and implement centralized call processing redundancy Describe Data Center Structure and Modularity Describe the Design Methodology Describe the Technologies used within the Data Center Describe WLAN Fundamentals Design and Deploy WLAN Infrastructure for Mobility Design Network Management Considerations into a Data Center Design the Access Layer of a Data Center General Networking Knowledge given a Network Design and a set of Requirements High Availability Routing Features Identify Cisco Equipment and Related Hardware Implement high availability features on Cisco Unified Fabric products in a Cisco Data Center Architecture Implement Multicast over Wireless Implement QoS for Wireless Applications Implement VoWLAN Infrastructure Security Infrastructure Services Install Integrate Client Device Security IP Services LAN Switching Technologies Layer 2 Technologies Layer 3 Technologies Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices Manage the Unified Fabric in a Cisco Data Center Architecture Monitoring and Reporting Tools Network Principles Replace Service-Related Knowledge Threat Defense Threat Defense Architectures Troubleshoot Call Setup Issues Troubleshooting Troubleshoot Registration Issues VPN Technologies WAN Technologies

Links

Powered by CCNP Exams Test Base
↑