Posted on

ccnp 642-832 tshoot practice questions

ccnp 642-832 tshoot practice questions are available. Troubleshooting and Maintaining Cisco IP Networks (TSHOOT 642-832) is a qualifying exam for the Cisco Certified Network Professional CCNP, certification.

The 642-832 TSHOOT exam will certify that the successful candidate has important knowledge and skills necessary to plan and perform regular maintenance on complex enterprise routed and switched networks and use technology-based practices and a systematic ITIL-compliant approach to perform network troubleshooting.

Below are the details of ccnp 642-832 tshoot practice questions objectives.

6% 1.0 Maintain and Monitor Network Performance

1.1 Develop a plan to monitor and manage a network
1.2 Perform network monitoring using IOS tools
1.3 Perform routine IOS device maintenance
1.4 Isolate sub-optimal internetwork operation at the correctly defined OSI Model layer

94% 2.0 Troubleshoot Multi Protocol System Networks

2.1 Troubleshoot EIGRP
2.2 Troubleshoot OSPF
2.3 Troubleshoot eBGP
2.4 Troubleshoot routing redistribution solution
2.5 Troubleshoot a DHCP client and server solution
2.6 Troubleshoot NAT
2.7 Troubleshoot first hop redundancy protocols
2.8 Troubleshoot IPv6 routing
2.9 Troubleshoot IPv6 and IPv4 interoperability
2.10 Troubleshoot switch-to-switch connectivity for the VLAN based solution
2.11 Troubleshoot loop prevention for the VLAN based solution
2.12 Troubleshoot Access Ports for the VLAN based solution

Practice ccnp 642-832 tshoot practice questions here. 

 

 

Posted on

Cisco CCNP 642-832 Practice Test Questions

Troubleshooting and Maintaining Cisco IP Networks is the exam name of 642-832 TSHOOT test. There are 35-40 questions in real Cisco 642-832 TSHOOT exam, which will take the candidates 135 minutes to complete the test. The Associated Certifications are CCNP Routing and Switching. The available language is English. Candidates can register Cisco 642-832 TSHOOT exam at Pearson VUE testing center.

Share Cisco 642-832 TSHOOT practice test questions below.

FCAPS is a network maintenance model defined by ISO. It stands for which of the following?
A. Fault Management
B. Action Management
C. Configuration Management
D. Protocol Management
E. Security Management
Answer: A,C,E

Which three management categories are contained in the FCAPS network maintenance model? (Choose three.)
A. Config
B. Fault
C. Storage
D. Accounting
E. Redundancy
F. Telecommunications
Answer: A,B,D

What is the result of configuring the logging console warning command?
A. Messages with a severity level of 4 and higher will be logged to all available TTY lines.
B. Only warning messages will be logged on the console.
C. Warning, error, critical, and informational messages will be logged on the console.
D. Warning, critical, alert, and emergency messages will be logged on the console.
E. The logging console warning command needs to be followed in the configuration with logging buffered byte size to specify the message buffer size for the console.
Answer: D

Get more Cisco 642-832 TSHOOT practice test questions here.

 

 

 

Posted on

Cisco 642-832 TSHOOT Sample Questions

Cisco 642-832 TSHOOT sample questions are available, which will be helpful in your preparation. Troubleshooting and Maintaining Cisco IP Networks is the exam name of 642-832 TSHOOT test. There are 35-40 questions in real Cisco 642-832 TSHOOT exam, which will take the candidates 135 minutes to complete the test.

The Associated Certifications are CCNP Routing and Switching. The available language is English. Candidates can register Cisco 642-832 TSHOOT exam at Pearson VUE testing center. Some Cisco 642-832 TSHOOT sample questions are shared below.

FCAPS is a network maintenance model defined by ISO. It stands for which of the following?
A. Fault Management
B. Action Management
C. Configuration Management
D. Protocol Management
E. Security Management
Answer: A,C,E

Which three management categories are contained in the FCAPS network maintenance model? (Choose three.)
A. Config
B. Fault
C. Storage
D. Accounting
E. Redundancy
F. Telecommunications
Answer: A,B,D

What is the result of configuring the logging console warning command?
A. Messages with a severity level of 4 and higher will be logged to all available TTY lines.
B. Only warning messages will be logged on the console.
C. Warning, error, critical, and informational messages will be logged on the console.
D. Warning, critical, alert, and emergency messages will be logged on the console.
E. The logging console warning command needs to be followed in the configuration with logging buffered byte size to specify the message buffer size for the console.
Answer: D

Get more Cisco 642-832 TSHOOT sample questions here.

 

 

Posted on

Paths of Getting CCNP Routing and Switching Certified

Cisco Certified Network Professional (CCNP) Routing and Switching certification validates the ability to plan, implement, verify and troubleshoot local and wide-area enterprise networks and work collaboratively with specialists on advanced security, voice, wireless and video solutions. The CCNP Routing and Switching certification is appropriate for those with at least one year of networking experience who are ready to advance their skills and work independently on complex network solutions.

Those who achieve CCNP Routing and Switching have demonstrated the skills required in enterprise roles such as network engineer, support engineer, systems engineer or network technician. The routing and switching protocol knowledge from this certification will provide a lasting foundation as these skills are equally relevant in the physical networks of today and the virtualized network functions of tomorrow.

In the CCNP Routing and Switching program, you will cover:

Implementing secure, IPv6-enabled LAN and WAN routing solutions to support today’s business-critical services and widespread adoption of BYOD across the enterprise
High availability, switch virtualization and scalable VPN technologies needed to support branch offices and to enable the mobile workforce

Two Paths to Certification
Option 1
If you are currently pursuing your CCNP Routing and Switching certification, you may choose to complete the v1.0 curriculum. Upon completion, the certification will be good for three years. The last day to test is January 29, 2015.
642-902 ROUTE
642-813 SWITCH
642-832 TSHOOT

Option 2
If you have not yet started pursuing the CCNP Routing and Switching certification or if you have only taken one of the three v1.0 exams, we recommend that you pursue the v2.0 certification.
300-101 ROUTE
300-115 SWITCH
300-135 TSHOOT

 

Posted on 656 Comments

300-135 TSHOOT Online Test-Troubleshooting and Maintaining Cisco IP Networks

Currently, our 300-135 TSHOOT online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

[WATU 7]

 

cart

 

Posted on 387 Comments

300-135 TSHOOT Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)

Troubleshooting and Maintaining Cisco IP Networks (TSHOOT 300-135) is a qualifying exam for the Cisco CCNP Routing and Switching certification. The TSHOOT 300-135 exam certifies that the successful candidate has the knowledge and skills necessary to:
Plan and perform regular maintenance on complex enterprise routed and switched networks
Use technology-based practices and a systematic ITIL-compliant approach to perform network troubleshooting

300-135 TSHOOT is known as Troubleshooting and Maintaining Cisco IP Networks (TSHOOT). The Associated Certifications are CCNP Routing and Switching. There are 15-25 questions in real Cisco 300-135 TSHOOT exam, which will take the candidates 135 minutes to complete the test. The available language is English. Candidates can register Cisco TSHOOT 300-135 exam at Pearson VUE testing center.

300-135 TSHOOT exam topics are important in your preparation.

5% 1.0 Network Principles

1.1 Use Cisco IOS troubleshooting tools
1.1.a Debug, conditional debug
1.1.b Ping and trace route with extended options
1.2 Apply troubleshooting methodologies
1.2.a Diagnose the root cause of networking issues (analyze symptoms, identify and describe root cause)
1.2.b Design and implement valid solutions
1.2.c Verify and monitor resolution

40% 2.0 Layer 2 Technologies

2.1 Troubleshoot switch administration
2.1.a SDM templates
2.1.b Managing MAC address table
2.1.C Troubleshoot Err-disable recovery
2.2 Troubleshoot Layer 2 protocols
2.2.a CDP, LLDP
2.2.b UDLD
2.3 Troubleshoot VLANs
2.3.a Access ports
2.3.b VLAN database
2.3.c Normal, extended VLAN, voice VLAN
2.4 Troubleshoot trunking
2.4.a VTPv1, VTPv2, VTPv3, VTP pruning
2.4.b dot1Q
2.4.c Native VLAN
2.4.d Manual pruning
2.5 Troubleshoot EtherChannels
2.5.a LACP, PAgP, manual
2.5.b Layer 2, Layer 3
2.5.c Load balancing
2.5.d EtherChannel misconfiguration guard
2.6 Troubleshoot spanning tree
2.6.a PVST+, RPVST +, MST
2.6.b Switch priority, port priority, path cost, STP timers
2.6.c PortFast, BPDUguard, BPDUfilter
2.6.d Loopguard, Rootguard
2.7 Troubleshoot other LAN switching technologies
2.7.a SPAN, RSPAN
2.8 Troubleshoot chassis virtualization and aggregation technologies
2.8.a Stackwise

40% 3.0 Layer 3 Technologies

3.1 Troubleshoot IPv4 addressing and subnetting
3.1.a Address types (Unicast, broadcast, multicast, and VLSM)
3.1.b ARP
3.1.c DHCP relay and server
3.1.d DHCP protocol operations
3.2 Troubleshoot IPv6 addressing and subnetting
3.2.a Unicast
3.2.b EUI-64
3.2.c ND, RS/RA
3.2.d Autoconfig (SLAAC)
3.2.e DHCP relay and server
3.2.f DHCP protocol operations
3.3 Troubleshoot static routing
3.4 Troubleshoot default routing
3.5 Troubleshoot administrative distance
3.6 Troubleshoot passive interfaces
3.7 Troubleshoot VRF lite
3.8 Troubleshoot filtering with any protocol
3.9 Troubleshoot between any routing protocols or routing sources
3.10 Troubleshoot manual and autosummarization with any routing protocol
3.11 Troubleshoot policy-based routing
3.12 Troubleshoot suboptimal routing
3.13 Troubleshoot loop prevention mechanisms
3.13.a Route tagging, filtering
3.13.b Split-horizon
3.13.c Route poisoning
3.14 Troubleshoot RIPv2
3.15 Troubleshoot EIGRP neighbor relationship and authentication
3.16 Troubleshoot loop free path selection
3.16.a RD, FD, FC, successor, feasible successor
3.17 Troubleshoot EIGPR operations
3.17.a Stuck in active
3.18 Troubleshoot EIGRP stubs
3.19 Troubleshoot EIGRP load balancing
3.19.a Equal cost
3.19.b Unequal cost
3.20 Troubleshoot EIGRP metrics
3.21 Troubleshoot OSPF neighbor relationship and authentication
3.22 Troubleshoot network types, area types, and router types
3.22.a Point-to-point, multipoint, broadcast, nonbroadcast
3.22.b LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
3.22.c Internal router, backbone router, ABR, ASBR
3.22.d Virtual link
3.23 Troubleshoot OSPF path preference
3.24 Troubleshoot OSPF operations
3.25 Troubleshoot OSPF for IPv6
3.26 Troubleshoot BGP peer relationships and authentication
3.26.a Peer group
3.26.b Active, passive
3.26.c States and timers
3.27 Troubleshoot eBGP
3.27.a eBGP
3.27.b 4-byte AS number

5% 4.0 VPN Technologies

4.1 Troubleshoot GRE

5% 5.0 Infrastructure Security

5.1 Troubleshoot IOS AAA using local database
5.2 Troubleshoot device access control
5.2.a Lines (VTY, AUX, console)
5.2.b Management plane protection
5.2.c Password encryption
5.3 Troubleshoot router security features
5.3.a IPv4 access control lists (standard, extended, time-based)
5.3.b IPv6 traffic filter
5.3.c Unicast reverse path forwarding

5% 6.0 Infrastructure Services

6.1 Troubleshoot device management
6.1.a Console and VTY
6.1.b Telnet, HTTP, HTTPS, SSH, SCP
6.1.c (T)FTP
6.2 Troubleshoot SNMP
6.2.a V2
6.2.b V3
6.3 Troubleshoot logging
6.3.a Local logging, syslog, debugs, conditional debugs
6.3.b Timestamps
6.4 Troubleshoot Network Time Protocol(NTP)
6.4.a NTP master, client, version 3, version 4
6.4.b NTP authentication
6.5 Troubleshoot IPv4 and IPv6 DHCP
6.5.a DHCP client, IOS DHCP server, DHCP relay
6.5.b DHCP options (describe)
6.6 Troubleshoot IPv4 Network Address Translation (NAT)
6.6.a Static NAT, dynamic NAT, PAT
6.7 Troubleshoot SLA architecture
6.8 Troubleshoot tracking objects
6.8.a Tracking objects
6.8.b Tracking different entities (for example, interfaces, IPSLA results)

Exam Note: 300-135 TSHOOT is new exam instead of 642-832 TSHOOT, which begins January 30, 2015.

Related resource: http://www.cisco.com/web/learning/exams/list/tshoot2.html#~Topics

 

 

 

 

Posted on 1,049 Comments

642-832 TSHOOT Online Test-Troubleshooting and maintaing cisco ip networks

Currently, our 642-832 TSHOOT online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

[WATU 4]

 

cart

 

Posted on

642-832 TSHOOT Troubleshooting and Maintaining Cisco IP Networks

Troubleshooting and Maintaining Cisco IP Networks (TSHOOT 642-832) is a qualifying exam for the Cisco Certified Network Professional CCNP, certification. The 642-832 TSHOOT exam will certify that the successful candidate has important knowledge and skills necessary to (1) plan and perform regular maintenance on complex enterprise routed and switched networks and (2) use technology-based practices and a systematic ITIL-compliant approach to perform network troubleshooting.

Troubleshooting and Maintaining Cisco IP Networks is the exam name of 642-832 TSHOOT test. There are 35-40 questions in real Cisco 642-832 TSHOOT exam, which will take the candidates 135 minutes to complete the test. The Associated Certifications are CCNP Routing and Switching. The available language is English. Candidates can register Cisco 642-832 TSHOOT exam at Pearson VUE testing center.

Cisco 642-832 TSHOOT exam objectives are as follows for the candidates to prepare the test.

6% 1.0 Maintain and Monitor Network Performance

1.1 Develop a plan to monitor and manage a network
1.2 Perform network monitoring using IOS tools
1.3 Perform routine IOS device maintenance
1.4 Isolate sub-optimal internetwork operation at the correctly defined OSI Model layer

94% 2.0 Troubleshoot Multi Protocol System Networks

2.1 Troubleshoot EIGRP
2.2 Troubleshoot OSPF
2.3 Troubleshoot eBGP
2.4 Troubleshoot routing redistribution solution
2.5 Troubleshoot a DHCP client and server solution
2.6 Troubleshoot NAT
2.7 Troubleshoot first hop redundancy protocols
2.8 Troubleshoot IPv6 routing
2.9 Troubleshoot IPv6 and IPv4 interoperability
2.10 Troubleshoot switch-to-switch connectivity for the VLAN based solution
2.11 Troubleshoot loop prevention for the VLAN based solution
2.12 Troubleshoot Access Ports for the VLAN based solution
2.13 Troubleshoot private VLANS
2.14 Troubleshoot port security
2.15 Troubleshoot general switch security
2.16 Troubleshoot VACLs and PACLs
2.17 Troubleshoot switch virtual interfaces (SVIs)
2.18 Troubleshoot switch supervisor redundancy
2.19 Troubleshoot switch support of advanced services (i.e., Wireless, VoIP and Video)
2.20 Troubleshoot a VoIP support solution
2.21 Troubleshoot a video support solution
2.22 Troubleshoot Layer 3 Security
2.23 Troubleshoot issues related to ACLs used to secure access to Cisco routers
2.24 Troubleshoot configuration issues related to accessing the AAA server for authentication purposes
2.25 Troubleshoot security issues related to IOS services (i.e.,finger, NTP, HTTP, FTP, RCP etc.)

Exam Note: The last day of 642-832 TSHOOT to test is January 29, 2015. The new exam is 300-135 TSHOOT, which begins January 30, 2015.

Related resource: http://www.cisco.com/web/learning/exams/list/tshoot.html#~Topics