600-212 SPLTE Online Test-Implementing Cisco Service Provider Mobility LTE Networks (SPLTE)

Currently, our 600-212 SPLTE online test only provide 20 questions. Answer one question correctly, you can get 5 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

Which Cisco ASR 5000 configuration option allows you to configure Lawful Intercept on all MMEs?

context li_context
administrator li encrypted password 6e76e79ab2296d70 li-administration
interface interface_to_dfvendor
ip address 10.10.10.2 255.255.255.0
lawful-intercept src-ip-addr 10.10.10.2
lawful-intercept tcp event-delivery dest-addr 10.20.20.1 dest-port 8081
lawful-intercept tcp content-delivery dest-addr 10.20.20.2 dest-port 8082

context li_context
administrator li encrypted password 6e76e79ab2296d70 li-administration
interface interface_to_dfvendor
ip address 10.10.10.2 255.255.255.0
lawful-intercept src-ip-addr 10.10.10.2
lawful-intercept tcp content-delivery none
lawful-intercept tcp event-delivery dest-addr 10.20.20.1 dest-port 8081
require lawful-intercept-tcp-proxy multiple

context li_context
administrator li encrypted password 6e76e79ab2296d70 li-administration
interface interface_to_dfvendor
ip address 10.10.10.2 255.255.255.0
lawful-intercept src-ip-addr 10.10.10.2
lawful-intercept tcp content-delivery dest-addr 10.20.20.2 dest-port 8082
require lawful-intercept-tcp-proxy multiple

Which two methods are used for Lawful Intercept provisioning? (Choose two.)

Stake out provisioning

Camp-on provisioning provisioning

Active call provisioning

Surveillance provisioning

Circuit tap provisioning

Which interface is used to transfer Interception Related Information to the Delivery/Mediation Function?

X1_1

Which configuration option configures a TACACS+ server to be used for authentication on the Cisco ASR 5000?

configure
tacacs mode
server priority 1 ip-address 10.10.10.10 password cisco123
exit
aaa tacacs+

configure
tacacs mode
server priority 1 ip-address 10.10.10.10 service authorization password cisco123
exit
aaa tacacs+

configure
tacacs mode
server priority 5 ip-address 10.10.10.10 service authentication password cisco123
exit
aaa tacacs+

configure
tacacs mode
server priority 1 ip-address 10.10.10.10 shared-secret cisco123
exit
aaa tacacs+

Which types can be classified as bulk stats on the Cisco ASR 5000?

Counter, Gauge, Information

Gauge, Counter, Iterative

Circular, Gauge, Counter

Watermark, Counter, Gauge

Which option describes SNMP inform requests?

notifications sent to and acknowledged by an SNMP agent

notifications sent to and acknowledged by an SNMP management station

notifications sent to but not acknowledged by an SNMP agent

notifications sent to but not acknowledged by an SNMP management station

Which capability does trace logging on the Cisco ASR 5000 enable the operator to do?

enables debug-level temporary logging filters based on call ID, IP address, MSID, or username

enables logging for all management messages based on call ID, IP address, MSID, or username

enables syslog facility logging for debug-level messages related to call management messaging

enables informational-level syslog facility logging for call management messaging

Which option describes local-user accounts on the Cisco ASR 5000?

The local-user account is ANSI T1.276-2003 compliant.

The local-user account can be configured only in the local context.

The local-user account allows for privilege-level escalation on a context level.

The local-user account can be accessed only from the serial port.

Which three configuration options do local-user accounts allow for on the Cisco ASR 5000? (Choose three.)

max failed logins

password complexity

lockout times

administrator level

username complexity

context access

Which statement about idle mode signaling reduction in the LTE network is true?

ISR support is not mandatory for UEs that support GERAN/UTRAN.

ISR requires special functionality on the UE and the core network nodes (MME, SGSN, and SGW).

ISR requires special functionality on the UE and the core network nodes (MME and SGSN).

Gn/Gp SGSN supports idle mode signaling reduction functionality.

Which option is required on the Cisco ASR 5000 to map the S1U upstream packet to a corresponding DSCP value on the SGW?

Use the create qci-qos-mapping table with the appropriate settings and apply it to the SGW service.

Use the create qci-qos-mapping table with the appropriate settings and apply it to the GTPU service.

Use the create qci-qos-mapping table with the appropriate settings and apply it to the EGTP service.

The S1U upstream packets cannot be marked on the SGW.

Which GTP version is used to tunnel signaling traffic on the S4 interface in IPv6?

GTPv1

GTPv2

GTPv0

GTP Prime

The IP pools that are configured on the Cisco ASR 5000 are used for address allocation. AAA and DHCP have not been enabled from the PGW.
Which two parameters does the Cisco ASR 5000 PGW use to generate the subscriber ID for IP address allocation? (Choose two.)

IMEI

MSISDN

EPS bearer ID

IMSI

username

Which two APN names are recommended by GSMA IR.88 / IR.92 in the Voice over LTE solution? (Choose two.)

Voice

Emergency

SOS

IMS

Video

SIP

Which statement describes what occurs with a UE in an active Voice over LTE call being handed over successfully from the 4G LTE network to the 3G network via enhanced SR-VCC technology?

The voice call is interrupted and reconnected during the hand-over.

The voice call must be handed over to Voice over HSPA in 3G network.

The voice call uses a circuit-switched connection in the 3G network.

The voice call is handed back to 4G Voice over LTE when coverage is back.

Which three options are charging characteristic selection modes for S-GW/P-GW? (Choose three.)

home default

visiting default

APN specific

roaming default

subscription specific

serving node specific

Which three target identities can trigger Lawful Intercept on the Cisco ASR 5000 MME? (Choose three.)

IMSI

MSISDN

IMEI

username

TMSI

P-TMSI

Which description of TACACS+ administrator authentication and authorization on the Cisco ASR 5000 is true?

The Cisco ASR 5000 uses a privilege-level attribute value pair to restrict users to command sets that correspond to their assigned administrative role.

The Cisco ASR 5000 uses a privilege-level information element to restrict users to command sets that correspond to their assigned administrative role.

The Cisco ASR 5000 uses an administrator-level attribute value pair to restrict users to command sets that correspond to their assigned administrative role.

The Cisco ASR 5000 uses an administrator-level information element to restrict users to command sets that correspond to their assigned administrative role.

Which two statements about the Diameter message direction on the Rf interface are true? (Choose two.)

Diameter Accounting-Request is initiated by S-GW/P-GW to CDF.

Diameter Accounting-Answer is initiated by CDF to S-GW/P-GW.

Diameter Accounting-Request is initiated by S-GW/P-GW to CGF.

Diameter Accounting-Answer is initiated by CGF to S-GW/P-GW.

Diameter Accounting-Request is initiated by S-GW/P-GW to the billing server.

Diameter Accounting-Answer is initiated by the billing server to S-GW/P-GW.

Which configuration command enables the Cisco ASR 5000 to hold onto CDRs that are duplicates while waiting for the primary CGF to come up?

GTPP duplicate-hold-time

GTPP dictionary

GTPP dead-interval

GTPP default

Question 1 of 20

CCNP Exams Test Base

New CCNP Exams from January 30, 2015

Note:

600-212 SPLTE Online Test-Implementing Cisco Service Provider Mobility LTE Networks (SPLTE)

Recent Posts

Tags

Links