Posted on 3 Comments

ccnp 642-732 cuwss self study

ccnp 642-732 cuwss self study is available. This Cisco 642-732 CUWSS exam assesses a candidate’s capability to plan and conduct a wireless site survey, to design the RF network and to conduct a post installation assessment to ensure compliancy.

ccnp 642-732 cuwss self study objectives are below.

16% 2.0 Plan for the Site Survey

2.1 Select proper survey mode
2.1.a Data
2.1.b Voice
2.1.c Video
2.1.d Location
2.1.e Bridging (point-to-point; point-to-multipoint)
2.1.f Hybrid
2.2 Determine proper deployment characteristics
2.2.a Dense deployment
2.2.b Highly mobile (Many cells, high-reliability, and fast-moving clients) vs. nomadic (temporary position)
2.2.c Indoor and outdoor mesh
2.2.d Use Predictive Cisco Wireless Control System (WCS) planning tools
2.3 Select survey equipment
2.4 Determine site survey best practices for customer environment
2.5 Identify impact of material attenuation
2.6 Identify survey documentation needed for customer report

30% 3.0 Conduct the Site Survey

3.1 Conduct a Layer 1 survey (Cisco Spectrum Expert)
3.2 Select proper antenna to conduct the site survey
3.3 Conduct the Layer 2 site survey for indoor environment
3.3.a Select proper access point to conduct the site survey (use what is purchased)
3.3.b Configure access point
3.3.c Survey with proper client
3.3.d Utilize proper survey techniques
3.4 Conduct the Layer 2 site survey for outdoor point-to-point and point- to-multipoint networks
3.5 Conduct the Layer 2 site survey for outdoor mesh network

Practice ccnp 642-732 cuwss self study here.


Posted on 1 Comment

cisco 642-742 iuwvn exam preparation

cisco 642-742 iuwvn exam preparation is available. This Cisco 642-742 IUWVN exam assesses a candidate’s capability to integrate VoWLAN services into the WLAN and be able to implement QoS, MPLS, and high bandwidth applications into the wireless network.

cisco 642-742 iuwvn exam preparation objectives are below.

25% 2.0 Implement VoWLAN

2.1 Configure wireless client devices
2.1.a Reference current best practice guidelines
2.1.b Device security considerations
2.2 Configure the WLAN for VoWLAN
2.2.a Implement current best practice guidelines
2.2.b Security configurations (PEAP, EAP-TLS, EAP-FAST)
2.2.c CCKM/PKC, 802.11r
2.3 Troubleshoot VoWLAN implementation
2.3.a Spectrum Expert
2.3.b AirMagnet VoFi analyzer
2.3.c Traffic stream Metrics (TSM)
2.3.d Incremental complexity testing

20% 3.0 Implement QoS for Wireless Applications

3.1 Describe and implement general considerations for wired QoS
3.1.a Configurations
3.1.b DSCP/802.1p
3.1.c Voice VLAN
3.2 Describe and implement the appropriate Wireless QoS deployment schemes
3.2.a WMM
3.2.b 802.11e
3.2.c Mapping – wired to wireless (five and six mismatching)
3.3 Configure WCS/WLC for QoS
3.3.a Connection admission control (CAC)
3.3.b TSPEC
3.3.c QoS Basic Service Set (QBSS)
3.3.d Queues
3.3.e Bandwidth reservation
3.3.f Disable “DHCP required”
3.3.g Disable Address Resolution Protocol (ARP) unicast
3.3.h Enable ARP caching
3.3.i Cisco Identity Based Networking Services (IBN)
3.4 Reference most current best practice guidelines

Practice cisco 642-742 iuwvn exam preparation here.





Posted on 3 Comments

cisco certification 642-747 iuwms programs

cisco certification 642-747 iuwms programs are available now. This Cisco 642-747 IUWMS exam assesses a candidate’s capability to integrate mobility services into the WLAN, to tune and troubleshoot the WLAN, and to implement indoor enterprise mesh networks.

cisco certification 642-747 iuwms programs exam objectives below.

20% 1.0 Describe WLAN Fundamentals

1.1 Describe the impact of distributed antenna systems (DAS) for location-based services
1.2 Tracking mobile clients
1.2.a Active radio frequency identification (RFID) tag
1.2.b Wi-Fi devices
1.2.c Active interferers
1.3 Describe the applications of RFID, Chokepoint, and TDoA Tags
1.3.a Compare and contrast Cisco Wireless Control System (Cisco WCS) and third-party applications
1.4 Calibrate Received Signal Strength Indicator (RSSI) for the Cisco and third-party implementation
1.5 Configure, generate, and interpret location and event notifications
1.6 Configure and tune the Mobility Services Engine (for example, Simple Network Management Protocol (SNMP) impact on network traffic and platform hardware)
1.6.a NMSP
1.7 Design access point (AP)/antenna deployment model for location
1.8 Describe location techniques
1.8.a Angulations
1.8.b Cell of origin
1.8.c TDoA/ToA Lateration
1.8.d RSS Lateration
1.8.e Pattern Recognition
1.8.f RF Fingerprinting

23% 2.0 Design and Deploy WLAN Infrastructure for Mobility

2.1 Configure single Service Set Identifier (SSID) designs w/mobility
2.1.a AP group VLANs
2.1.b Identity Based Networking (IBN)
2.1.c Single SSID/Multiple WLAN
2.2 Analyze implications of L2 and L3 roaming
2.2.a Avoid salt and pepper
2.2.b Minimize intercontroller roaming
2.2.c Mobility tunneling
2.3 Implement high availability
2.3.a Legacy primary, secondary, and tertiary
2.3.b Backup primary and backup secondary outside of mobility group
2.3.c Enhanced timers
2.3.d AP fallback
2.3.e AP prioritization
2.3.f Anchor controller redundancy
2.3.g RF redundancy – coverage hole, RRM, and double AP
2.4 Troubleshoot AP join process using the following solutions
2.4.a AP console debug
2.4.b AP console config
2.4.c WLC debug
2.4.d WLC logs
2.4.e Switchport, DHCP, and VLAN
2.5 Implement the following Cisco Unified Wireless best practices
2.5.a LAG vs. Port-based
2.5.b RF groups
2.5.c H-REAP
2.5.d AP count; per-subnet limitation
2.5.e Client subnet sizing considerations
2.5.f Per WLAN client limit
2.5.g Office Extend
2.5.h Passive client
2.6 Define and implement mobility groups/list
2.6.a AP regulatory domain flexibility
2.6.b 24/48/72 WLC mobility size
2.7 Adjust authentication/EAP timers
2.8 Tune RF environment for context aware services
2.8.a Data rates
2.8.b Transmit power levels and thresholds
2.8.c Channels and DCA
2.8.d Band Select
2.8.e ClientLink
2.9 Troubleshooting intercontroller communications
2.9.a Mobility group formation
2.9.b RF group formation
2.9.c Intercontroller roaming

Practice cisco certification 642-747 iuwms programs here. 



Posted on

cisco 642-737 iauws exam preparation

cisco 642-737 iauws exam preparation is available. This Cisco 642-737 IAUWS exam assesses a candidate’s capability to secure the wireless network from security threats via appropriate security policies and best practices, to properly implement security standards, and to properly configure wireless security components.

cisco 642-737 iauws exam preparation exam objectives are below.

22% 1.0 Integrate Client Device Security

1.1 Describe Extensible Authentication Protocol (EAP) authentication process
1.2 Configure client for secure EAP authentication
1.3 Configure the AnyConnect client
1.4 Describe the impact of security configurations on application and client roaming
1.5 Troubleshoot client wireless authentication issues
1.5.a Packet analyzers
1.5.b Debugs
1.5.c Logs
1.5.d Cisco Wireless Control System (WCS)
1.5.e Access Control Server (ACS)
1.6 Identify client security risks
1.6.a driver update
1.6.b MS hot fixes

11% 2.0 Design and Integrate Wireless Network with NAC

2.1 Describe the architectures
2.1.a inband
2.1.b out-of-band
2.1.c agent vs. agentless
2.1.d Cisco Network Admission Control (NAC) appliance
2.2 Describe the high-level authentication process flow
2.2.a CAS
2.2.b CAM
2.2.d Wireless LAN controller (WLC)
2.2.e External authentication sources
2.3 Configure the WLC for Network Access Controller (NAC)
2.4 Verify wireless authentication with NAC

Practice cisco 642-737 iauws exam preparation here. 


Posted on 3 Comments

cisco 300-135 tshoot boot camp training

cisco 300-135 tshoot boot camp training is available. The TSHOOT 300-135 exam certifies that the successful candidate has the knowledge and skills necessary to:
Plan and perform regular maintenance on complex enterprise routed and switched networks
Use technology-based practices and a systematic ITIL-compliant approach to perform network troubleshooting

Below are the details of cisco 300-135 tshoot boot camp training objectives.

5% 1.0 Network Principles

1.1 Use Cisco IOS troubleshooting tools
1.1.a Debug, conditional debug
1.1.b Ping and trace route with extended options
1.2 Apply troubleshooting methodologies
1.2.a Diagnose the root cause of networking issues (analyze symptoms, identify and describe root cause)
1.2.b Design and implement valid solutions
1.2.c Verify and monitor resolution

40% 2.0 Layer 2 Technologies

2.1 Troubleshoot switch administration
2.1.a SDM templates
2.1.b Managing MAC address table
2.1.C Troubleshoot Err-disable recovery
2.2 Troubleshoot Layer 2 protocols
2.2.a CDP, LLDP
2.2.b UDLD
2.3 Troubleshoot VLANs
2.3.a Access ports
2.3.b VLAN database
2.3.c Normal, extended VLAN, voice VLAN
2.4 Troubleshoot trunking
2.4.a VTPv1, VTPv2, VTPv3, VTP pruning
2.4.b dot1Q
2.4.c Native VLAN
2.4.d Manual pruning
2.5 Troubleshoot EtherChannels
2.5.a LACP, PAgP, manual
2.5.b Layer 2, Layer 3
2.5.c Load balancing
2.5.d EtherChannel misconfiguration guard
2.6 Troubleshoot spanning tree
2.6.a PVST+, RPVST +, MST
2.6.b Switch priority, port priority, path cost, STP timers
2.6.c PortFast, BPDUguard, BPDUfilter
2.6.d Loopguard, Rootguard
2.7 Troubleshoot other LAN switching technologies
2.8 Troubleshoot chassis virtualization and aggregation technologies
2.8.a Stackwise

Practice cisco 300-135 tshoot boot camp training here. 



Posted on

Cisco Routing and Switching Certification

The CCNP Routing and Switching certification is appropriate for those with at least one year of networking experience who are ready to advance their skills and work independently on complex network solutions. Those who achieve CCNP Routing and Switching have demonstrated the skills required in enterprise roles such as network engineer, support engineer, systems engineer or network technician.

Beginning January 30, 2015, 300-101 ROUTE, 300-115 SWITCH and 300-135 TSHOOT exams will be the only exams available for registration.

Now, candidates can get 300-101 ROUTE, 300-115 SWITCH and 300-135 TSHOOT information with the following links.

300-101 ROUTE Implementing Cisco IP Routing

300-115 SWITCH Implementing Cisco IP Switched Networks

300-135 TSHOOT Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)


Posted on

ccnp 300-115 switch study notes

ccnp 300-115 switch study notes are available and helpful in your preparation. The SWITCH 300-115 exam certifies the switching knowledge and skills of successful candidates. They are certified in planning, configuring, and verifying the implementation of complex enterprise switching solutions that use the Cisco Enterprise Campus Architecture.

ccnp 300-115 switch study notes exam objectives.

65% 1.0 Layer 2 Technologies

1.1 Configure and verify switch administration
1.1.a SDM templates
1.1.b Managing MAC address table
1.1.c Troubleshoot Err-disable recovery
1.2 Configure and verify Layer 2 protocols
1.2.a CDP, LLDP
1.2.b 1.2.b UDLD
1.3 Configure and verify VLANs
1.3.a Access ports
1.3.b VLAN database
1.3.c Normal, extended VLAN, voice VLAN
1.4 Configure and verify trunking
1.4.a VTPv1, VTPv2, VTPv3, VTP pruning
1.4.b dot1Q
1.4.c Native VLAN
1.4.d Manual pruning
1.5 Configure and verify EtherChannels
1.5.a LACP, PAgP, manual
1.5.b Layer 2, Layer 3
1.5.c Load balancing
1.5.d EtherChannel misconfiguration guard
1.6 Configure and verify spanning tree
1.6.a PVST+, RPVST+, MST
1.6.b Switch priority, port priority, path cost, STP timers
1.6.c PortFast, BPDUguard, BPDUfilter
1.6.d Loopguard and Rootguard
1.7 Configure and verify other LAN switching technologies
1.7.a PAN, RSPAN
1.8 Describe chassis virtualization and aggregation technologies
1.8.a Stackwise

20% 2.0 Infrastructure Security

2.1 Configure and verify switch security features
2.1.a DHCP snooping
2.1.b IP Source Guard
2.1.c Dynamic ARP inspection
2.1.d Port security
2.1.e Private VLAN
2.1.f Storm controls
2.2 Describe device security using Cisco IOS AAA with TACACS+ and RADIUS
2.2.a AAA with TACACS+ and RADIUS
2.2.b Local privilege authorization fallback

Practice ccnp 300-115 switch study notes here.




Posted on

cisco certification 300-101 route questions

cisco certification 300-101 route questions are available. The ROUTE 300-101 exam certifies the routing knowledge and skills of successful candidates. They are certified in using advanced IP addressing and routing in implementing scalable and highly secure Cisco routers that are connected to LANs, WANs, and IPv6.

cisco certification 300-101 route questions objectives are below.

10% 1.0 Network Principles

1.1 Identify Cisco Express Forwarding concepts
1.1.a FIB
1.1.b Adjacency table
1.2 Explain general network challenges
1.2.a Unicast
1.2.b Out-of-order packets
1.2.c Asymmetric routing
1.3 Describe IP operations
1.3.a ICMP Unreachable and Redirects
1.3.b IPv4 and IPv6 fragmentation
1.3.c TTL
1.4 Explain TCP operations
1.4.a IPv4 and IPv6 (P)MTU
1.4.b MSS
1.4.c Latency
1.4.d Windowing
1.4.e Bandwidth-delay product
1.4.f Global synchronization
1.5 Describe UDP operations
1.5.a Starvation
1.5.b Latency
1.6 Recognize proposed changes to the network
1.6.a Changes to routing protocol parameters
1.6.b Migrate parts of the network to IPv6
1.6.c Routing protocol migration

10% 2.0 Layer 2 Technologies

2.1 Configure and verify PPP
2.1.a Authentication (PAP, CHAP)
2.1.b PPPoE (client side only)
2.2 Explain Frame Relay
2.2.a Operations
2.2.b Point-to-point
2.3.c Multipoint

Practice cisco certification 300-101 route questions here. 


Posted on

Cisco 600-601 IMINS Exam Training Courses

Cisco 600-601 IMINS Exam Training Courses are available. The Associated Certification is Cisco Industrial Networking Specialist. There are 55-65 questions in real Cisco 600-601 IMINS exam, which will take the candidates 75 minutes to complete the test. The available language is English. Candidates can register Cisco 600-601 IMINS exam at Pearson VUE testing center.

Share Cisco 600-601 IMINS Exam Training Courses below.

Which two reasons make mesh bonding systems most effective? (Choose two.)
A. cover wide areas
B. provide additional strength to floor structures
C. provide low-impedance noise-equalizing paths
D. create equipotential grounding systems
E. most cost-effective approach
Answer: C,D

What do deflections indicate to the time domain reflectometer user?
A. They indicate splices, water in the cable, split pairs, and discontinuities or faults.
B. Do not connect live circuit cables to the input of the time domain reflectometer. Connect the cable that is being tested to the cable connector on the front panel of the time domain reflectometer.
C. Upward deflections indicate high-impedance mismatches or opens, and downward deflections indicate shorts or low-impedance mismatches.
D. They are used to select the I/O impedance of the time domain reflectometer. You can select 50, 75, 95, or 125 impedances.
Answer: C

What are two benefits that are provided by proper grounding and bonding systems? (Choose two.)
A. higher speed communications
B. safe discharge of electrostatic energy
C. lower equipment power consumption
D. equipotential termination points for equipment and cable shields
E. lowest carbon footprint
Answer: B,D

Get more Cisco 600-601 IMINS Exam Training Courses here.



Posted on 11 Comments

600-601 IMINS Online Test-Managing Industrial Networks with Cisco Networking Technologies

Currently, our 600-601 IMINS online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

[WATU 35]