Note:

  • The new CCNP Data Center certification required exams are 300-180 DCIT, 300-165 DCII, 300-160 DCID, 300-175 DCUCI and 300-170 DCVAI exams.
  • The last day to test Cisco 810-403 OUTCOMES exam is December 29, 2017.
  • The last day to test Cisco 820-424 BTASBVA exam is December 29, 2017.

Tag Archives: General Networking Knowledge

23 Mar

640-692 RSTECH Supporting Cisco routing and Switching Network Devices

The 640-692 RSTECH is the exam associated with CCT Routing and Switching certification. Cisco CCT Routing and Switching certification focuses on the skills required for onsite support and maintenance of Cisco routers, switches, and operating environments.

Technicians in this area must be able to identify Cisco router and switch models, accessories, cabling, and interfaces; understand the Cisco IOS Software operating modes and identify commonly found software; and be able to use the Cisco Command Line Interface (CLI) to connect and service products.

There are 60-70 questions in real Supporting Cisco routing and Switching Network Devices 640-692 RSTECH exam, which will take the candidates 90 minutes to complete the test. The available language is English. Candidates can register Cisco 640-692 RSTECH exam at Pearson VUE testing center.

Cisco 640-692 RSTECH Free Online Test

Cisco 640-692 RSTECH exam topics are below.

27% 1.0 Identify Cisco Equipment and Related Hardware

1.1 Identify the interfaces on Cisco equipment including the Cisco Catalyst 6500, 4500, 3560, 3750 and 2975 & 2960 Series switches and Cisco 2800, 2900, 3800, 3900, 7200, 7300, 7600 Series Integrated Service routers.
1.2 Identify the cabling on Cisco equipment
1.3 Identify Cisco products by logo marking and model number (including, but not limited to, locations on chassis, line card, module, or adapter)
1.4 Identify and locate the serial number of Cisco products (including, but not limited to, locations on chassis, line card, module, or adapter)
1.5 Identify and describe the commonly used components
1.6 Describe the hardware memory common terms and use in Cisco routers and switches

27% 2.0 Describe Cisco IOS Software Operation

2.1 Describe the different operating modes for Cisco CatOS / IOS Software
2.2 Navigate between the different operating modes listed
2.3 Determine the current mode of the device
2.4 Copy and paste a configuration file from / to a router or switch
2.5 Know how to use and interpret the basic Cisco IOS Software commands
2.6 Describe where to find the configuration register parameter and how to change it
2.7 Identify a configuration file from a Cisco device
2.8 Perform software upgrade or downgrade using TFTP, xmodem, tftpdnld, flash memory, memory card reader, or USB
2.9 Perform password recovery on a Cisco device

27% 3.0 General Networking Knowledge

3.1 Describe in general terms the basic functionality and key differences for the following hardware: LAN switch, router, modem, and Wireless Access Points
3.2 Describe what an IP address and subnet is
3.2 Differentiate between these Layer 2 technologies: Ethernet, Fast Ethernet, Gigabit Ethernet, Serial, ATM, ISDN, DSL, Optical, and so on
3.2 Describe what FTP does
3.2 Describe what TFTP does
3.2 Describe what a CSU/DSU does (such as, loop back processes, and so on)
3.2 Describe Telco termination point (such as, demarc, and so on)
3.2 Describe what Telnet and SSH does
3.2 Describe what ping does
3.2 Use the OSI and TCP/IP models and their associated protocols to explain how data flows in a network
3.2 Identify and correct common network problems at Layers 1 and 2

23% 4.0 Service-related Knowledge

4.1 Locate and use a text editor (such as, Notepad)
4.2 Locate and use Terminal Emulation
4.3 Locate and use the Window command prompt
4.4 Configure networks settings for Ethernet port on laptop (IP address, subnet mask and default gateway) and establish a connection with Ethernet ports on Cisco equipment
4.5 Make a physical connection from laptop to Cisco console port
4.6 Make a physical Ethernet connection from laptop to Cisco device Ethernet port using correct cable
4.7 Use modem to connect to Cisco console port and phone line
4.8 Configure the correct DIP switch settings on the modem (or other appropriate settings)
4.9 Identify the different loop-back plugs
4.10 Identify null modem cable and application
4.11 Configure and use TFTP server (such as, TFTP d32)
4.12 Use the hardware tools needed for repair

21 Mar

010-151 DCTECH Cisco Certified Technician (CCT) for Data Center

Cisco Certified Technician (CCT) for Data Center is the full name of 010-151 DCTECH exam. The Associated Certifications is CCT Data Center. There are 65-75 questions in real Cisco 010-151 DCTECH exam, which will take the candidates 90 minutes to complete the test. The available language is English. Candidates can register Cisco 010-151 DCTECH exam at Pearson VUE testing center.

The Cisco Certified Technician (CCT) for Data Center validates a technician’s competency in the following areas; basic Cisco NX-OS configuration, Cisco Data Center products and hardware components with an emphasis on the Cisco Unified Computing System (UCS).

Cisco 010-151 DCTECH Free Online Test

Cisco 010-151 DCTECH exam objectives are important in your preparation.

17% 1.0 General Networking Knowledge

1.1 Demonstrate a high level understanding of SAN technology
1.2 Describe what an IP address and subnet is. Add default gateway and subnet mask
1.3 Differentiate between these Layer 2 technologies: Ethernet, Fast Ethernet, Gigabit Ethernet
1.4 Describe what FTP does
1.5 Describe what TFTP does
1.6 Describe what Telnet does
1.7 Describe what ping does
1.8 Use the OSI and TCP/IP models and their associated protocols to explain how data flows in a network
1.9 Identify and correct common network problems at Layers 1 and 2
1.10 Identify the cabling and connectors

25% 2.0 Identify Cisco Equipment and Related Hardware

2.1 Describe the Cisco Unified Computing System components and chassis layout
2.2 Describe the Cisco Unified Computing System LED
2.3 Describe the UCS C-series rack mount servers components and chassis layout
2.4 Describe the Cisco Nexus 2000 series fabric extender components
2.5 Identify Cisco Nexus 2000 series fabric extender cabling types
2.6 Describe the Cisco Nexus 5000 series switch components
2.7 Describe the Cisco Nexus 7000 series switch components
2.8 Describe the Cisco MDS 9000 product family components
2.9 Identifying the MDS 9000 Family Storage networking modules
2.10 Identify Cisco products by logo marking and model number (including, but not limited to locations on chassis, line card, module, or adapter)
2.11 Identify and locate the serial number of Cisco products (including but not limited to locations on chassis, line card, module, or adapter)

25% 3.0 Describe Cisco NX-OS Software Operation

3.1 Describe the Cisco Integrated Management Controller (CIMC)
3.2 Describe features and functionality of UCS Manager
3.3 Describe the different command modes for Cisco NX-OS software
3.4 Determine the current mode of the device
3.5 Know how to export technical support data
3.6 Verify the device configuration
3.7 Know how to use and interpret the basic Cisco NX-OS commands
3.8 Identify a configuration file from a Cisco device
3.9 Using the device file systems, directories, and files
3.10 Perform password recovery on a Cisco NX-OS switch device

33% 4.0 Service-Related Knowledge

4.1 Make a physical connection from laptop to Cisco console port
4.2 Perform installation process steps and expected outcomes
4.3 Perform initial setup tasks
4.4 Service restoration verification
4.5 Perform remedial procedures on Cisco devices
4.6 Use the hardware tools needed for repair
4.7 Upgrade the BIOS on a UCS Server Blade with the GUI
4.8 Upgrade Cisco Integrated Management Controller firmware on a UCS Server C-Series

19 Dec

640-792 TPTECH Online Test-Supporting Cisco TelePresence System Devices v1.0 (TPTECH)

Currently, our 640-792 TPTECH online test only provide 20 questions. Answer one question correctly, you can get 5 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

A Cisco TelePresence Codec is added in Cisco Unified Communications Manager as a(n);

 
 
 
 
 

What is the maxirr.um number of microphones that a Cisco TelePresence 1300 unit can have?

 
 
 
 

Which three hardware components are not supported on the Cisco TelePresence 500? (Choose three.)

 
 
 
 
 

Which two hardware components are optional on the Cisco TelePresence 500? (Choose two)

 
 
 
 

Which command would you use to verify the CT5 system upgrade status using the SSH console?

 
 
 
 

Which Cisco TelePresence Solution component allows for multiparty calls?

 
 
 
 

Which port do you use on you, laptop to establish a connect with the Secondary Camera port on the Primary Codec?

 
 
 
 

A 7960 phone was just replaced at the customer site. The speakerphone is no: working. How can you verify that the setting is enabled?

 
 
 
 

Which three hardware components are included on the Cisco TelePresence 1300? (Choose three)

 
 
 
 
 

Which transport layer protocol is used for real-time voice and video traffic?

 
 
 
 

Which CTS endpoint allows you to choose a camera focus distance of 1 feet and 6 feet?

 
 
 
 

Which type of Ethernet cable do you use to connect from the Ethernet port on your laptop to the secondary camera port on the primary codec?

 
 
 
 

Where would you find the Cisco TelePresence System model number?

 
 
 
 

Which two hardware components are optional for the Cisco TelePresence 1000? (Choose two)

 
 
 
 

Which three of the following are benefits of Cisco TelePresence Manager? (Choose three)

 
 
 
 
 

Which three of the following components are included on the Cisco TelePresence 3210? (Choose three.)

 
 
 
 
 

Which four functions does Cisco TelePresence rely on Cisco Unified Communications Manager for? (Choose four)

 
 
 
 
 
 

Which size and type of tool is required to loosen the screws that allow rotational adjustment of the CTS-3010 cameras?

 
 
 
 

Which port do you conned to on the Primary Codec in order to establish an Ethernet connection between your laptop and the Cisco TelePresence 3000 equipment?

 
 
 
 

Which port is indicated on the right Secondary Codec for the CTS-3210?

 
 
 
 

Question 1 of 20

 

cart

18 Dec

640-692 RSTECH Online Test-Supporting Cisco routing and Switching Network Devices

Currently, our 640-692 RSTECH online test only provide 20 questions. Answer one question correctly, you can get 5 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

Please go to 640-692 RSTECH Online Test-Supporting Cisco routing and Switching Network Devices to view the test

 

cart

17 Dec

010-151 DCTECH Online Test-Cisco Certified Technician (CCT) for Data Center

Currently, our 010-151 DCTECH online test only provide 20 questions. Answer one question correctly, you can get 5 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

Please go to 010-151 DCTECH Online Test-Cisco Certified Technician (CCT) for Data Center to view the test

 

cart


Recent Posts


Tags

and/or Remove an End-Device and/or Remove an Infrastructure Device and/or Remove Cables (network and/or power) Cisco 642-997 DCUFI exam Cisco 642-999 DCUCI exam Configure Cisco Unity Connection Configure Cisco Unity Express using the GUI Describe and implement centralized call processing redundancy Describe Data Center Structure and Modularity Describe the Design Methodology Describe the Technologies used within the Data Center Describe WLAN Fundamentals Design and Deploy WLAN Infrastructure for Mobility Design Network Management Considerations into a Data Center Design the Access Layer of a Data Center General Networking Knowledge given a Network Design and a set of Requirements High Availability Routing Features Identify Cisco Equipment and Related Hardware Implement high availability features on Cisco Unified Fabric products in a Cisco Data Center Architecture Implement Multicast over Wireless Implement QoS for Wireless Applications Implement VoWLAN Infrastructure Security Infrastructure Services Install Integrate Client Device Security IP Services LAN Switching Technologies Layer 2 Technologies Layer 3 Technologies Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices Manage the Unified Fabric in a Cisco Data Center Architecture Monitoring and Reporting Tools Network Principles Replace Service-Related Knowledge Threat Defense Threat Defense Architectures Troubleshoot Call Setup Issues Troubleshooting Troubleshoot Registration Issues UCS Compute Troubleshooting VPN Technologies WAN Technologies

Links

Powered by CCNP Exams Test Base