Note:

  • CCIE Security 350-018 exam will be retired on January 30, 2017, the new exam is 400-251.
  • CCNA Data Center 640-911 DCICN exam will be retired on April 11, 2017.
  • CCNA Data Center 640-916 DCICT exam will be retired on April 11, 2017.
  • CCNP Data Center 642-035 DCUCT exam will be retired on July 3, 2017.
  • CCNP Data Center 642-980 DCUFT exam will be retired on July 3, 2017.
  • CCNP Data Center 642-996 DCUFD exam will be retired on July 3, 2017.
  • CCNP Data Center 642-997 DCUFI exam will be retired on July 3, 2017.
  • CCNP Data Center 642-998 DCUCD exam will be retired on July 3, 2017.
  • CCNP Data Center 642-999 DCUCI exam will be retired on July 3, 2017.
  • The new CCNP Data Center certification required exams are 300-180 DCIT, 300-165 DCII, 300-160 DCID, 300-175 DCUCI and 300-170 DCVAI exams.

Tag Archives: Design and Deploy WLAN Infrastructure for Mobility

10 Jun

300-365 WIDEPLOY Online Test-Deploying Cisco Wireless Enterprise Networks

Currently, our 300-365 WIDEPLOY online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

1. A network engineer for a college dormitory notices that student devices are filling up the SP-DB and are not allowing the shared wireless printers to be discovered. Which feature can be used to reserve space in the SP-DB for the printers?

 
 
 
 

2. Which two options are limitations of using an AP as a workgroup bridge? (Choose two.)

 
 
 
 
 

3. On which AP radio or radios is Cisco WGB association supported?

 
 
 
 

4. A customer requires that an SSID is broadcasted to specific access points that use certain interfaces. Which feature can be used to achieve this goal?

 
 
 
 

5. Which of the following is not a Cisco RF fingerprinting key advantage over Location Tracking?

 
 
 
 

6. A customer has implemented several WLANs in an auditorium utilizing a newly dedicated WLC and is experiencing excessive channel utilization regardless of occupancy. Which action reduces channel utilization without removing SSIDs?

 
 
 
 

7. A corporation has a Cisco Unified Wireless Network that has been deployed for voice coverage. The wireless data rates have been tuned to mandatory rates of 18 Mbps and 36 Mbps. Some wireless clients have been experiencing drops streaming multicast video while moving throughout the building. What is the cause of the drop in video?

 
 
 
 

8. An engineer used an interface group under the SSID configuration, but noticed that a test client is getting an IP assigned in a different VLAN from the DHCP server. Which two options override the interface group configuration on the SSID? (Choose two.)

 
 
 
 
 
 
 

9. A WLAN engineer has been asked to upgrade the software on a MSE 3365 Appliance. The engineer cannot access the system using the root password and the Grub password as the details had never been documented. How should the engineer perform the password recovery?

 
 
 
 

10. The customer has deployed C7960 phones with clients connected to them. What switch feature could be enabled to distinguish IP voice traffic from client data traffic?

 
 
 
 
 

Question 1 of 10

 

cart

29 Oct

cisco certification 642-747 iuwms programs

cisco certification 642-747 iuwms programs are available now. This Cisco 642-747 IUWMS exam assesses a candidate’s capability to integrate mobility services into the WLAN, to tune and troubleshoot the WLAN, and to implement indoor enterprise mesh networks.

cisco certification 642-747 iuwms programs exam objectives below.

20% 1.0 Describe WLAN Fundamentals

1.1 Describe the impact of distributed antenna systems (DAS) for location-based services
1.2 Tracking mobile clients
1.2.a Active radio frequency identification (RFID) tag
1.2.b Wi-Fi devices
1.2.c Active interferers
1.3 Describe the applications of RFID, Chokepoint, and TDoA Tags
1.3.a Compare and contrast Cisco Wireless Control System (Cisco WCS) and third-party applications
1.4 Calibrate Received Signal Strength Indicator (RSSI) for the Cisco and third-party implementation
1.5 Configure, generate, and interpret location and event notifications
1.6 Configure and tune the Mobility Services Engine (for example, Simple Network Management Protocol (SNMP) impact on network traffic and platform hardware)
1.6.a NMSP
1.7 Design access point (AP)/antenna deployment model for location
1.8 Describe location techniques
1.8.a Angulations
1.8.b Cell of origin
1.8.c TDoA/ToA Lateration
1.8.d RSS Lateration
1.8.e Pattern Recognition
1.8.f RF Fingerprinting

23% 2.0 Design and Deploy WLAN Infrastructure for Mobility

2.1 Configure single Service Set Identifier (SSID) designs w/mobility
2.1.a AP group VLANs
2.1.b Identity Based Networking (IBN)
2.1.c Single SSID/Multiple WLAN
2.2 Analyze implications of L2 and L3 roaming
2.2.a Avoid salt and pepper
2.2.b Minimize intercontroller roaming
2.2.c Mobility tunneling
2.3 Implement high availability
2.3.a Legacy primary, secondary, and tertiary
2.3.b Backup primary and backup secondary outside of mobility group
2.3.c Enhanced timers
2.3.d AP fallback
2.3.e AP prioritization
2.3.f Anchor controller redundancy
2.3.g RF redundancy – coverage hole, RRM, and double AP
2.4 Troubleshoot AP join process using the following solutions
2.4.a AP console debug
2.4.b AP console config
2.4.c WLC debug
2.4.d WLC logs
2.4.e Switchport, DHCP, and VLAN
2.5 Implement the following Cisco Unified Wireless best practices
2.5.a LAG vs. Port-based
2.5.b RF groups
2.5.c H-REAP
2.5.d AP count; per-subnet limitation
2.5.e Client subnet sizing considerations
2.5.f Per WLAN client limit
2.5.g Office Extend
2.5.h Passive client
2.6 Define and implement mobility groups/list
2.6.a AP regulatory domain flexibility
2.6.b 24/48/72 WLC mobility size
2.7 Adjust authentication/EAP timers
2.8 Tune RF environment for context aware services
2.8.a Data rates
2.8.b Transmit power levels and thresholds
2.8.c Channels and DCA
2.8.d Band Select
2.8.e ClientLink
2.9 Troubleshooting intercontroller communications
2.9.a Mobility group formation
2.9.b RF group formation
2.9.c Intercontroller roaming

Practice cisco certification 642-747 iuwms programs here. 

 

 

08 Sep

642-747 IUWMS Implementing Cisco Unified Wireless Mobility Services

The IUWMS Implementing Cisco Unified Wireless Mobility Services exam is the exam associated with the CCNP Wireless certification. This Cisco 642-747 IUWMS exam assesses a candidate’s capability to integrate mobility services into the WLAN, to tune and troubleshoot the WLAN, and to implement indoor enterprise mesh networks.

642-747 IUWMS is known as Implementing Cisco Unified Wireless Mobility Services. The Associated Certification is CCNP Wireless. There are 50-60 questions in real Cisco 642-747 IUWMS test, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 642-747 IUWMS exam at Pearson VUE testing center.

Below are the details of Cisco 642-747 IUWMS exam topics.

20% 1.0 Describe WLAN Fundamentals

1.1 Describe the impact of distributed antenna systems (DAS) for location-based services
1.2 Tracking mobile clients
1.2.a Active radio frequency identification (RFID) tag
1.2.b Wi-Fi devices
1.2.c Active interferers
1.3 Describe the applications of RFID, Chokepoint, and TDoA Tags
1.3.a Compare and contrast Cisco Wireless Control System (Cisco WCS) and third-party applications
1.4 Calibrate Received Signal Strength Indicator (RSSI) for the Cisco and third-party implementation
1.5 Configure, generate, and interpret location and event notifications
1.6 Configure and tune the Mobility Services Engine (for example, Simple Network Management Protocol (SNMP) impact on network traffic and platform hardware)
1.6.a NMSP
1.7 Design access point (AP)/antenna deployment model for location
1.8 Describe location techniques
1.8.a Angulations
1.8.b Cell of origin
1.8.c TDoA/ToA Lateration
1.8.d RSS Lateration
1.8.e Pattern Recognition
1.8.f RF Fingerprinting

23% 2.0 Design and Deploy WLAN Infrastructure for Mobility

2.1 Configure single Service Set Identifier (SSID) designs w/mobility
2.1.a AP group VLANs
2.1.b Identity Based Networking (IBN)
2.1.c Single SSID/Multiple WLAN
2.2 Analyze implications of L2 and L3 roaming
2.2.a Avoid salt and pepper
2.2.b Minimize intercontroller roaming
2.2.c Mobility tunneling
2.3 Implement high availability
2.3.a Legacy primary, secondary, and tertiary
2.3.b Backup primary and backup secondary outside of mobility group
2.3.c Enhanced timers
2.3.d AP fallback
2.3.e AP prioritization
2.3.f Anchor controller redundancy
2.3.g RF redundancy – coverage hole, RRM, and double AP
2.4 Troubleshoot AP join process using the following solutions
2.4.a AP console debug
2.4.b AP console config
2.4.c WLC debug
2.4.d WLC logs
2.4.e Switchport, DHCP, and VLAN
2.5 Implement the following Cisco Unified Wireless best practices
2.5.a LAG vs. Port-based
2.5.b RF groups
2.5.c H-REAP
2.5.d AP count; per-subnet limitation
2.5.e Client subnet sizing considerations
2.5.f Per WLAN client limit
2.5.g Office Extend
2.5.h Passive client
2.6 Define and implement mobility groups/list
2.6.a AP regulatory domain flexibility
2.6.b 24/48/72 WLC mobility size
2.7 Adjust authentication/EAP timers
2.8 Tune RF environment for context aware services
2.8.a Data rates
2.8.b Transmit power levels and thresholds
2.8.c Channels and DCA
2.8.d Band Select
2.8.e ClientLink
2.9 Troubleshooting intercontroller communications
2.9.a Mobility group formation
2.9.b RF group formation
2.9.c Intercontroller roaming

22% 3.0 Implement MSE Architecture

3.1 Describe Cisco Mobility Services Engine (MSE) capabilities and integration with wireless network architecture
3.1.a Context aware
3.1.b Adaptive wireless intrusion prevention system (IPS)
3.1.c Guest tracking
3.1.d Spectrum intelligence
3.1.e Scalability
3.2 Deploy context-aware services for specific environments
3.2.a Mixed-use environments
3.2.b Complex RF environments
3.2.c Small areas
3.2.d Timing issues
3.2.e Adjusting history and location parameters
3.2.f Multifloor facilities
3.2.g Re-calibration
3.3 Integrate third-party applications
3.3.a Server engines
3.3.b Licensing
3.3.c Common API
3.4 Integrate and manage MSE with Cisco WCS
3.4.a Install and Synchronize
3.4.b Location
3.4.c Enable tracking
3.4.d Define the MSE parameters
3.4.e Understand advanced parameters
3.5 Maintain MSE
3.5.a Database clean-up
3.5.b Database back-up and restore
3.5.c Upgrade
3.6 Troubleshoot MSE operations
3.6.a Debug of Network Mobility Services Protocol (NMSP)
3.6.b Debug of controller
3.6.c Location accuracy tool
3.6.d Debug RFID

17% 4.0 Implement and Manage Indoor and Outdoor Mesh

4.1 Describe wireless Mesh and its benefits
4.2 Describe the following Mesh operation modes:
4.2.a RAP
4.2.b MAP
4.2.c Ethernet bridge functionality for Mesh
4.3 Implement Mesh
4.3.a Hop count
4.3.b Backhaul caveats (throughput rates, QoS, path properties)
4.3.c Secondary backhaul
4.3.d SAP authorization (MAC filter entry)
4.3.e Utilize WLC CLI
4.3.f Outdoor RF considerations
4.4 Describe Mesh convergence
4.4.a Cisco adaptive wireless path protocol (AWPP)
4.4.b Bridge group names
4.4.c Parent selection
4.4.d Understand reconvergence
4.5 Utilize Cisco WCS for Mesh monitoring
4.5.a Add Mesh APs to map
4.5.b Utilize mesh tree view
4.5.c Utilize Cisco WCS mesh tools
4.5.d Generate Mesh reports
4.6 Utilize workgroup bridges
4.6.a Cisco WCS management for workgroup bridges
4.6.b Differences between workgroup and universal bridges
4.6.c Considerations for using workgroup bridges

18% 5.0 Implement Advanced Services and Manage with Cisco WCS and Navigator

5.1 Install and maintain Cisco WCS/Navigator and perform the following tasks
5.1.a Add Cisco WCS
5.1.b Add controllers
5.1.c Adding APs
5.1.d Adding maps
5.2 Describe Navigator’s role, features, and functions
5.3 Implement Cisco WCS partitioning and Navigator domains
5.4 Implement time of day AP power savings
5.5 Implement scheduled WLAN availability
5.6 Create and customize Cisco WCS reports
5.7 Configure background tasks
5.8 Configure and apply controller and access point templates
5.9 Monitor and convert autonomous APs
5.10 Configure WLC auto-provisioning
5.11 Utilize configuration auditing in Cisco WCS

Related resource: http://www.cisco.com/web/learning/exams/list/iuwms.html#~Topics

 

08 Aug

642-747 IUWMS Online Test-Implementing Cisco Unified Wireless Mobility Services (IUWMS)

Currently, our 642-747 IUWMS online test only provide 20 questions. Answer one question correctly, you can get 5 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

Please go to 642-747 IUWMS Online Test-Implementing Cisco Unified Wireless Mobility Services (IUWMS) to view the test

 

cart

 

 

 


Recent Posts


Tags

and/or Remove an End-Device and/or Remove an Infrastructure Device and/or Remove Cables (network and/or power) Cisco 642-997 DCUFI exam Cisco 642-999 DCUCI exam Configure Cisco Unity Connection Configure Cisco Unity Express using the GUI Describe and implement centralized call processing redundancy Describe Data Center Structure and Modularity Describe the Design Methodology Describe the Technologies used within the Data Center Describe WLAN Fundamentals Design and Deploy WLAN Infrastructure for Mobility Design Network Management Considerations into a Data Center Design the Access Layer of a Data Center General Networking Knowledge given a Network Design and a set of Requirements High Availability Routing Features Identify Cisco Equipment and Related Hardware Implement high availability features on Cisco Unified Fabric products in a Cisco Data Center Architecture Implement Multicast over Wireless Implement QoS for Wireless Applications Implement VoWLAN Infrastructure Security Infrastructure Services Install Integrate Client Device Security IP Services LAN Switching Technologies Layer 2 Technologies Layer 3 Technologies Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices Manage the Unified Fabric in a Cisco Data Center Architecture Monitoring and Reporting Tools Network Principles Replace Service-Related Knowledge Threat Defense Threat Defense Architectures Troubleshoot Call Setup Issues Troubleshooting Troubleshoot Registration Issues UCS Compute Troubleshooting VPN Technologies WAN Technologies

Links

Powered by CCNP Exams Test Base