Note:

  • The new CCNP Data Center certification required exams are 300-180 DCIT, 300-165 DCII, 300-160 DCID, 300-175 DCUCI and 300-170 DCVAI exams.
  • The last day to test Cisco 810-403 OUTCOMES exam is December 29, 2017.
  • The last day to test Cisco 820-424 BTASBVA exam is December 29, 2017.

Tag Archives: Describe Cisco IOS Software Operation

23 Mar

640-692 RSTECH Supporting Cisco routing and Switching Network Devices

The 640-692 RSTECH is the exam associated with CCT Routing and Switching certification. Cisco CCT Routing and Switching certification focuses on the skills required for onsite support and maintenance of Cisco routers, switches, and operating environments.

Technicians in this area must be able to identify Cisco router and switch models, accessories, cabling, and interfaces; understand the Cisco IOS Software operating modes and identify commonly found software; and be able to use the Cisco Command Line Interface (CLI) to connect and service products.

There are 60-70 questions in real Supporting Cisco routing and Switching Network Devices 640-692 RSTECH exam, which will take the candidates 90 minutes to complete the test. The available language is English. Candidates can register Cisco 640-692 RSTECH exam at Pearson VUE testing center.

Cisco 640-692 RSTECH Free Online Test

Cisco 640-692 RSTECH exam topics are below.

27% 1.0 Identify Cisco Equipment and Related Hardware

1.1 Identify the interfaces on Cisco equipment including the Cisco Catalyst 6500, 4500, 3560, 3750 and 2975 & 2960 Series switches and Cisco 2800, 2900, 3800, 3900, 7200, 7300, 7600 Series Integrated Service routers.
1.2 Identify the cabling on Cisco equipment
1.3 Identify Cisco products by logo marking and model number (including, but not limited to, locations on chassis, line card, module, or adapter)
1.4 Identify and locate the serial number of Cisco products (including, but not limited to, locations on chassis, line card, module, or adapter)
1.5 Identify and describe the commonly used components
1.6 Describe the hardware memory common terms and use in Cisco routers and switches

27% 2.0 Describe Cisco IOS Software Operation

2.1 Describe the different operating modes for Cisco CatOS / IOS Software
2.2 Navigate between the different operating modes listed
2.3 Determine the current mode of the device
2.4 Copy and paste a configuration file from / to a router or switch
2.5 Know how to use and interpret the basic Cisco IOS Software commands
2.6 Describe where to find the configuration register parameter and how to change it
2.7 Identify a configuration file from a Cisco device
2.8 Perform software upgrade or downgrade using TFTP, xmodem, tftpdnld, flash memory, memory card reader, or USB
2.9 Perform password recovery on a Cisco device

27% 3.0 General Networking Knowledge

3.1 Describe in general terms the basic functionality and key differences for the following hardware: LAN switch, router, modem, and Wireless Access Points
3.2 Describe what an IP address and subnet is
3.2 Differentiate between these Layer 2 technologies: Ethernet, Fast Ethernet, Gigabit Ethernet, Serial, ATM, ISDN, DSL, Optical, and so on
3.2 Describe what FTP does
3.2 Describe what TFTP does
3.2 Describe what a CSU/DSU does (such as, loop back processes, and so on)
3.2 Describe Telco termination point (such as, demarc, and so on)
3.2 Describe what Telnet and SSH does
3.2 Describe what ping does
3.2 Use the OSI and TCP/IP models and their associated protocols to explain how data flows in a network
3.2 Identify and correct common network problems at Layers 1 and 2

23% 4.0 Service-related Knowledge

4.1 Locate and use a text editor (such as, Notepad)
4.2 Locate and use Terminal Emulation
4.3 Locate and use the Window command prompt
4.4 Configure networks settings for Ethernet port on laptop (IP address, subnet mask and default gateway) and establish a connection with Ethernet ports on Cisco equipment
4.5 Make a physical connection from laptop to Cisco console port
4.6 Make a physical Ethernet connection from laptop to Cisco device Ethernet port using correct cable
4.7 Use modem to connect to Cisco console port and phone line
4.8 Configure the correct DIP switch settings on the modem (or other appropriate settings)
4.9 Identify the different loop-back plugs
4.10 Identify null modem cable and application
4.11 Configure and use TFTP server (such as, TFTP d32)
4.12 Use the hardware tools needed for repair

18 Dec

640-692 RSTECH Online Test-Supporting Cisco routing and Switching Network Devices

Currently, our 640-692 RSTECH online test only provide 20 questions. Answer one question correctly, you can get 5 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

Which windows-based text editor is preferred when working with a simple text document such as a Cisco configuration?

 
 
 
 

Which command initiates copying the saved configuration of a Cisco device to a TFTP server?

 
 
 
 

Which IOS layer does a server use to keep track of which application communications in which conversation?

 
 
 
 

Which three of the following statements are true about a router? (Choose three)

 
 
 
 
 

While performing password recovery on a Cisco device, the configuration register should be which value in order to bypass loading the startup configuration?

 
 
 
 

Which command can be used to identify the serial number of a Cisco router?

 
 
 
 

Which address facilitates the routing of packets over an IP network?

 
 
 
 

Which command sends an echo request packet to the largest host and then waits for an echo response message?

 
 
 
 
 

TFTP is a simple protocol files, such as a Cisco IOS or configuration file, from one device to another. Which device cannot be configured to be used as a TFTP server?

 
 
 
 
 

A null modem cable uses which adapter type?

 
 
 
 
 

Which two of the following are component of WAN connection? (Choose two)

 
 
 
 
 

What is the default operating mode you are initially logging into a router?

 
 
 
 

Which type if memory is used to permanently store the Cisco IOS software?

 
 
 
 

Which layer of the IOS model defines how data is formatted for transmission and how access to the physical media is controlled?

 
 
 
 

Which of the following best describes the cable that is used to connect a laptop to an Ethernet port on a Cisco router?

 
 
 
 

Which three of the following statements are true? (Choose three.)

 
 
 
 
 

What are two ways to open Microsoft Notepad on a Windows-based computer? (Choose two)

 
 
 
 
 

The pins and RJ-45 are numbered from 1 through 8. With the material points of the plug facing toward you, pin 1 is the leftmost pin. Which two sets are looped on an RJ-45 T1 loopback plug? (Choose two)

 
 
 
 
 
 

Which two pieces of information does the show ip interface brief command display.? (Choose two)

 
 
 
 
 

Which router can be used for disk-in-access to the router CLI management purposes and does not usually pass normal network traffic?

 
 
 
 

Question 1 of 20

 

cart


Recent Posts


Tags

and/or Remove an End-Device and/or Remove an Infrastructure Device and/or Remove Cables (network and/or power) Cisco 642-997 DCUFI exam Cisco 642-999 DCUCI exam Configure Cisco Unity Connection Configure Cisco Unity Express using the GUI Describe and implement centralized call processing redundancy Describe Data Center Structure and Modularity Describe the Design Methodology Describe the Technologies used within the Data Center Describe WLAN Fundamentals Design and Deploy WLAN Infrastructure for Mobility Design Network Management Considerations into a Data Center Design the Access Layer of a Data Center General Networking Knowledge given a Network Design and a set of Requirements High Availability Routing Features Identify Cisco Equipment and Related Hardware Implement high availability features on Cisco Unified Fabric products in a Cisco Data Center Architecture Implement Multicast over Wireless Implement QoS for Wireless Applications Implement VoWLAN Infrastructure Security Infrastructure Services Install Integrate Client Device Security IP Services LAN Switching Technologies Layer 2 Technologies Layer 3 Technologies Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices Manage the Unified Fabric in a Cisco Data Center Architecture Monitoring and Reporting Tools Network Principles Replace Service-Related Knowledge Threat Defense Threat Defense Architectures Troubleshoot Call Setup Issues Troubleshooting Troubleshoot Registration Issues UCS Compute Troubleshooting VPN Technologies WAN Technologies

Links

Powered by CCNP Exams Test Base