Note:

  • CCIE Security 350-018 exam will be retired on January 30, 2017, the new exam is 400-251.
  • CCNA Data Center 640-911 DCICN exam will be retired on April 11, 2017.
  • CCNA Data Center 640-916 DCICT exam will be retired on April 11, 2017.
  • CCNP Data Center 642-035 DCUCT exam will be retired on July 3, 2017.
  • CCNP Data Center 642-980 DCUFT exam will be retired on July 3, 2017.
  • CCNP Data Center 642-996 DCUFD exam will be retired on July 3, 2017.
  • CCNP Data Center 642-997 DCUFI exam will be retired on July 3, 2017.
  • CCNP Data Center 642-998 DCUCD exam will be retired on July 3, 2017.
  • CCNP Data Center 642-999 DCUCI exam will be retired on July 3, 2017.
  • The new CCNP Data Center certification required exams are 300-180 DCIT, 300-165 DCII, 300-160 DCID, 300-175 DCUCI and 300-170 DCVAI exams.

Tag Archives: Describe and implement centralized call processing redundancy

23 Oct

300-075 CIPTV2 Online Test-Implementing Cisco IP Telephony & Video, Part 2 v1.0

Currently, our 300-075 CIPTV2 online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

Which parameter should be set to prevent H.323 endpoints from registering to Cisco TelePresence Video Communication Server automatically?

 
 
 
 

Which type of search message appears in the Cisco TelePresence Video Communication Server search history page when it receives a H.323 call from a RAS-enabled endpoint that originates from an external zone?

 
 
 
 
 

You want to avoid unnecessary interworking in Cisco TelePresence Video Communication Server, such as where a call between two H.323 endpoints is made over SIP, or vice versa. Which setting is recommended?

 
 
 
 
 

Which three statements about configuring an encrypted trunk between Cisco TelePresence Video Communication Server and Cisco Unified Communications Manager are true? (Choose three.)

 
 
 
 
 
 
 

Which two actions ensure that the call load from Cisco TelePresence Video Communication Server to a Cisco Unified Communications Manager cluster is shared across Unified CM nodes? (Choose two.)

 
 
 
 
 

Which two options are configuration steps on Cisco Unified Communications Manager that are used when integrating with VCS Expressway servers? (Choose two.)

 
 
 
 
 

Which two statements regarding IPv4 Static NAT address 209.165.200.230 has been configured on a VCS Expressway are true? (Choose two.)

 
 
 
 

Which configuration does Cisco recommend for the peer address on the Expressway-C secure traversal zone when the Expressway-E has one NIC enabled?

 
 
 
 

If delegated credentials checking has been enabled and remote workers can register to the VCS Expressway, which statement is true?

 
 
 
 

Which two options should be used to create a secure traversal zone between the Expressway-C and Expressway-E? (Choose two.)

 
 
 
 
 

Question 1 of 10

 

cart

 

23 Oct

300-075 CIPTV2 Implementing Cisco IP Telephony & Video, Part 2 v1.0

Implementing Cisco IP Telephony & Video, Part 2 v1.0 is the full name of 300-075 test, which is a hot one of CCNP collaboration certification. There are 55-65 questions in real Cisco 300-075 exam, which will take the candidates 75 minutes to complete the test. The Associated Certifications of Cisco 300-075 exam is CCNP Collaboration. The available language is English. Candidates can register Cisco 300-075 exam at Pearson VUE testing center.

Cisco 300-075 exam tests candidates seeking CCNP Collaboration on their ability for implementing a Cisco Unified Collaboration solution in a multisite environment. It is helpful for the candidates to know Cisco 300-075 exam topics.

1.0 VCS Control 17%

1.1 Configure registration of devices
1.2 Explore the fundamentals of subzones
1.3 Describe zone plans for VCS
1.4 Describe and configure traversal zones
1.5 Describe the benefits and configuration of transforms and create call policies
1.6 Explore VCS searches for endpoints
1.7 Integrating LDAP
1.8 Explain DNS and SRV records and document requirements for SRV records
1.9 Describe how clustering and replication works and configure a cluster
1.10 Configure interworking with VCS
1.11 Configure H.323 (including gatekeeper) and SIP
1.12 Configure trunking

2.0 Collaboration Edge (VCS Expressway) 12%

2.1 Identify and configure the requirements when deploying a collaboration edge
2.2 Establish a relationship between C/Expressway E and CUCM
2.3 Document and produce requirements for firewall and NAT configuration
2.4 Describe and implement privacy and security controls for external devices and calls
2.5 Describe elements in a traversal call (H.460 and Assent)

3.0 Configure CUCM Video Service Parameters 9%

3.1 Configure DSCP
3.2 Configuring clusterwide parameters system QoS

4.0 Describe and Implement Centralized Call Processing Redundancy 10%

4.1 Describe device fail over
4.2 Configure call survivability
4.3 Configure Cisco Unified Survivable Remote Site Telephony operation
4.4 Verify redundancy operations

5.0 Describe and Configure a Multi-site Dial Plan for Cisco Unified Communications Manager 17%

5.1 Describe the issues with multi-site dial plans
5.2 Describe the differences between the various gateways and trunk types supported by Cisco Unified Communication Manager
5.3 Implement trunks to VCS
5.4 Describe globalized call routing based on URI dial plans and ILS
5.5 Implement a numbering plan for multi-site topologies

6.0 Implement Call Control Discovery/ILS 14%

6.1 Configure Service Advertisement Framework Forwarder
6.2 Configure Service Advertisement Framework Client Control
6.3 Configure Service Advertisement Framework Call Control Discovery
6.4 Configure URI calling
6.5 Configure ILS network
6.6 Configure Global Dial Plan Replication

7.0 Implement Video Mobility Features 9%

7.1 Configure extension mobility, and device mobility
7.2 Configure unified mobility (including video)

8.0 Implement Bandwidth Management and Call Admission Control on CUCM 12%

8.1 Configure regions
8.2 Implement transcoders and MTPs
8.3 Configure locations CAC and Enhanced CAC
8.4 Correlate events based on traces, logs, debugs and output of monitoring tools
8.5 Parse and interpret traces, logs, debugs and output of monitoring tools

 

04 Nov

cisco certified 642-457 cipt2 training

cisco certified 642-457 cipt2 training is available. This Cisco 642-457 CIPT2 exam tests a candidate’s skills in implementing a Cisco Unified Communications Manager solution in a multisite environment, applying a dial plan for a multisite environment, configuring survivability for remote sites during WAN failure, and implementing solutions to reduce bandwidth requirements in the IP WAN.

cisco certified 642-457 cipt2 training objectives are below.

12% 1.0 Describe and implement centralized call processing redundancy

1.1 Describe device fail over
1.2 Configure call survivability
1.3 Configure Cisco UnifiedSurvivable Remote Site Telephony operation
1.4 Configure Cisco Unified Communications Manager Express to provide redundancy
1.5 Configure MGCP Fallback operation
1.6 Verify redundancy operations

29% 2.0 Describe and configure a multi-site dial plan for Cisco Unified Communication Manager

2.1 Describe the issues with multi-site dial plans
2.2 Describe the differences between the various gateways and trunk types supported by Cisco Unified Communication Manager
2.3 Implement trunks
2.4 Describe globalized call routing
2.5 Implement a numbering plan for multisite topologies
2.6 Configure tailend hop off

Practice cisco certified 642-457 cipt2 training here.

 

26 Sep

Share Cisco 642-457 CIPT2 Questions and Answers

It is easy for the candidates to pass Cisco 642-457 exam. Latest Cisco 642-457 CIPT2 questions and answers are available. The Associated Certification is CCNP Voice. There are 60-70 questions in real Cisco 642-457 CIPT2 exam, which will take the candidates 105 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 642-457 CIPT2 exam at Pearson VUE testing center.

Share Cisco 642-457 CIPT2 questions and answers below.

Which statement best describes globalized call routing in Cisco Unified Communications Manager?
A. All incoming calling numbers on the phones are displayed as an E.164 with the + prefix.
B. Call routing is based on numbers represented as an E.164 with the + prefix format.
C. All called numbers sent out to the PSTN are in E.164 with the + prefix format.
D. The CSS of all phones contain partitions assigned to route patterns that are in global format.
E. All phone directory numbers are configured as an E.164 with the + prefix.
Answer: B

When an incoming PSTN call arrives at an MGCP gateway, how does the calling number get normalized to a global E.164 number with the + prefix in Cisco Unified Communications Manager?
A. Normalization is done using translation patterns.
B. Normalization is done using route patterns.
C. Normalization is done using the gateway incoming called party prefixes based on number type.
D. Normalization is done using the gateway incoming calling party prefixes based on number type.
E. Normalization is achieved by local route group that is assigned to the MGCP gateway.
Answer: D

When an incoming PSTN call arrives at an MGCP gateway, how does the called number get normalized to an internal directory number in Cisco Unified Communications Manager?
A. Normalization is done by configuring the significant digits for inbound calls on the MGCP gateway.
B. Normalization is done using route patterns.
C. Normalization is done using the gateway incoming called party prefixes based on number type.
D. Normalization is done using the gateway incoming calling party prefixes based on number type.
E. Normalization is achieved by local route group that is assigned to the MGCP gateway.
Answer: A

Get more Cisco 642-457 CIPT2 questions and answers here.

 

 

 

02 Sep

642-457 CIPT2 Implementing Cisco Unified Communications Manager, Part 2 v8.0

The Implementing Cisco Unified Communications Manager, Part 2 v8.0 (CIPT2 v8.0) 642-457 is the exam associated with the CCNP Voice certification. This Cisco 642-457 CIPT2 exam tests a candidate’s skills in implementing a Cisco Unified Communications Manager solution in a multisite environment, applying a dial plan for a multisite environment, configuring survivability for remote sites during WAN failure, and implementing solutions to reduce bandwidth requirements in the IP WAN.

Implementing Cisco Unified Communications Manager, Part 2 v8.0 is the exam name of 642-457 CIPT2 test. The Associated Certification is CCNP Voice. There are 60-70 questions in real Cisco 642-457 CIPT2 exam, which will take the candidates 105 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 642-457 CIPT2 exam at Pearson VUE testing center.

It is important for the candidates to know Cisco 642-457 CIPT2 exam topics.

12% 1.0 Describe and implement centralized call processing redundancy

1.1 Describe device fail over
1.2 Configure call survivability
1.3 Configure Cisco UnifiedSurvivable Remote Site Telephony operation
1.4 Configure Cisco Unified Communications Manager Express to provide redundancy
1.5 Configure MGCP Fallback operation
1.6 Verify redundancy operations

29% 2.0 Describe and configure a multi-site dial plan for Cisco Unified Communication Manager

2.1 Describe the issues with multi-site dial plans
2.2 Describe the differences between the various gateways and trunk types supported by Cisco Unified Communication Manager
2.3 Implement trunks
2.4 Describe globalized call routing
2.5 Implement a numbering plan for multisite topologies
2.6 Configure tailend hop off

21% 3.0 Implement call control discovery and Cisco Inter Company Media Exchange

3.1 Configure Service Advertisement Framework Forwarder
3.2 Configure Service Advertisement Framework Client Control
3.3 Configure Service Advertisement Framework Call Control Discovery

27% 4.0 Implement bandwidth management and Call Admission Control

4.1 Configure regions
4.2 Implement transcoders and MTPs
4.3 Configure locations
4.4 Implement RSVP agents
4.5 Implement SIP precondition
4.6 Describe functionality of a gatekeeper
4.7 Implement gatekeeper-based Call Admission Control
4.8 Configure Automated Alternate Routing
4.9 Configure multisite Music on Hold

11% 5.0 Implement mobility features

5.1 Configure Cisco Unified Communications Manager Device Mobility
5.2 Configure Cisco Extension Mobility

07 Aug

642-457 CIPT2 Online Test-Implementing Cisco Unified Communications Manager, Part 2 v8.0 (CIPT2 v8.0)

Currently, our 642-457 CIPT2 online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

Please go to 642-457 CIPT2 Online Test-Implementing Cisco Unified Communications Manager, Part 2 v8.0 (CIPT2 v8.0) to view the test

 

cart

 

 

 

 


Recent Posts


Tags

and/or Remove an End-Device and/or Remove an Infrastructure Device and/or Remove Cables (network and/or power) Cisco 642-997 DCUFI exam Cisco 642-999 DCUCI exam Configure Cisco Unity Connection Configure Cisco Unity Express using the GUI Describe and implement centralized call processing redundancy Describe Data Center Structure and Modularity Describe the Design Methodology Describe the Technologies used within the Data Center Describe WLAN Fundamentals Design and Deploy WLAN Infrastructure for Mobility Design Network Management Considerations into a Data Center Design the Access Layer of a Data Center General Networking Knowledge given a Network Design and a set of Requirements High Availability Routing Features Identify Cisco Equipment and Related Hardware Implement high availability features on Cisco Unified Fabric products in a Cisco Data Center Architecture Implement Multicast over Wireless Implement QoS for Wireless Applications Implement VoWLAN Infrastructure Security Infrastructure Services Install Integrate Client Device Security IP Services LAN Switching Technologies Layer 2 Technologies Layer 3 Technologies Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices Manage the Unified Fabric in a Cisco Data Center Architecture Monitoring and Reporting Tools Network Principles Replace Service-Related Knowledge Threat Defense Threat Defense Architectures Troubleshoot Call Setup Issues Troubleshooting Troubleshoot Registration Issues UCS Compute Troubleshooting VPN Technologies WAN Technologies

Links

Powered by CCNP Exams Test Base