Note:

  • CCIE Security 350-018 exam will be retired on January 30, 2017, the new exam is 400-251.
  • CCNA Data Center 640-911 DCICN exam will be retired on April 11, 2017.
  • CCNA Data Center 640-916 DCICT exam will be retired on April 11, 2017.
  • CCNP Data Center 642-035 DCUCT exam will be retired on July 3, 2017.
  • CCNP Data Center 642-980 DCUFT exam will be retired on July 3, 2017.
  • CCNP Data Center 642-996 DCUFD exam will be retired on July 3, 2017.
  • CCNP Data Center 642-997 DCUFI exam will be retired on July 3, 2017.
  • CCNP Data Center 642-998 DCUCD exam will be retired on July 3, 2017.
  • CCNP Data Center 642-999 DCUCI exam will be retired on July 3, 2017.
  • The new CCNP Data Center certification required exams are 300-180 DCIT, 300-165 DCII, 300-160 DCID, 300-175 DCUCI and 300-170 DCVAI exams.

Tag Archives: 300-365 WIDEPLOY test

10 Jun

300-365 WIDEPLOY Deploying Cisco Wireless Enterprise Networks

Deploying Cisco Wireless Enterprise Networks is the full name of 300-365 WIDEPLOY test. There are 60-70 questions in real Cisco 300-365 exam, which will take the candidates 90 minutes to complete the test. The Associated Certification is CCNP Wireless. The available language is English. Candidates can register Cisco 300-365 WIDEPLOY exam at Pearson VUE testing center.

It is helpful for the candidates to know 300-365 WIDEPLOY Deploying Cisco Wireless Enterprise Networks topics.

1.0 Implement QoS for Wireless Applications 13%

1.1 Describe and implement general considerations for wired QoS
1.1.a Configurations
1.1.b DSCP/IP precedence to 802.1p mapping
1.1.c Voice VLAN
1.1.d Trust boundaries
1.2 Describe and implement the appropriate wireless QoS deployment schemes
1.2.a 802.11e / WMM
1.2.b Mapping-wired to wireless
1.2.c Alloy QOS
1.3 Configure infrastructure QoS for wireless clients
1.3.a CAC
1.3.b TSPEC
1.3.c EDCA parameters
1.3.d Queues
1.3.e Bandwidth control and override
1.4 Implement AVC
1.4.a Configure AVC
1.4.a.[i] Profiles
1.4.a.[ii] Netflow/NBAR2
1.4.b Monitor AVC
1.4.b.[i] Controller
1.4.b.[ii] PI

2.0 Implement Multicast over Wireless 13%

2.1 Describe general multicast concepts
2.1.a PIM
2.1.b Cisco Group Management Protocol
2.1.c IGMP snooping
2.1.d RP
2.2 Describe implications for multicast in 802.11
2.2.a Highest mandatory data rate
2.2.b Unicast and multicast modes
2.2.c Roaming
2.2.d Controllers having same CAPWAP multicast group
2.2.e Video stream (reliable multicast)
2.2.f mDNS
2.3 Configure multicast in a wireless network
2.3.a Infrastructure multicast group
2.3.b IGMP snooping on the controller
2.3.c Video stream (reliable multicast)
2.3.d Switch peer group / Mobility group multicast
2.4 Configure mDNS
2.4.a mDNS gateway
2.4.b LSS
2.4.c Service advertisement
2.4.d MAC priority
2.4.e AAA override
2.4.f ISE portal
2.4.g Static advertisements on converged access
2.4.h mDNS profiling

3.0 Implement High Density 13%

3.1 Design for High Density
3.1.a High client count (high capacity)
3.1.b High AP count (high density)
3.2 Implement RXSOP
3.3 Implement enhanced roaming
3.4 Implement AP Groups
3.4.a RF profiles
3.5 Implement interface groups
3.6 Implement client limits
3.6.a Per Radio
3.6.b Per WLAN
3.6.c Per Interface

4.0 Design and Deploy WLAN Infrastructure for Mobility 18%

4.1 Describe the impact of client VLAN assignment on mobility
4.1.a AP group VLANS
4.1.b Identity based networking
4.2 Minimize inter controller roaming
4.3 Describe mobility control plane architectures
4.4 Describe mobility tunneling process
4.4.a Formation
4.4.a.[i] Ability to identify the tunnels created
4.4.b Tear down
4.4.c Messaging
4.4.d Handoff types
4.5 Implementing client mobility
4.5.a Switch Peer Group (SPG)
4.5.b Mobility groups
4.5.c Mobility lists
4.5.d Anchoring
4.5.e Virtual interface continuity
4.5.f Mobility Optimization (11k/11v)
4.5.g Verify resulting mobility tunneling structure

5.0 Implement Cisco MSE Architecture 12%

5.1 Describe Cisco MSE capabilities and integration with wireless network architecture
5.1.a Context aware
5.1.b Adaptive wireless IPS
5.1.c Analysis
5.1.d CleanAir
5.1.e Scalability
5.2 Describe location techniques
5.2.a Angulation
5.2.b Cell of origin
5.2.c TDoa and ToA lateration
5.2.d RSS lateration
5.2.e Pattern recognition
5.2.f RF Fingerprinting
5.2.g Compare probe based location vs data frame based location
5.2.h Bluetooth Low Energy (BLE)
5.3 Identify the relevant parameters required Initialize MSE for network operations
5.4 Implement base location services
5.4.a Calibration procedure
5.4.a.[i] PI based
5.4.a.[ii] Ekahau based
5.4.b Complex environments
5.4.b.[i] Mixed use environments
5.4.b.[ii] Complex RF environments
5.4.b.[iii] Small areas ( i.e new presence capabilities)
5.4.b.[iv] Multi-floor facilities
5.4.b.[v] Recalibration
5.4.c NMSP
5.4.d Synchronization
5.4.e History parameters
5.4.f Tracking parameters
5.4.f.[i] Active RFID tag
5.4.f.[ii] WiFi-Devices
5.4.f.[iii] Active Interferes
5.4.f.[iv] Rogue devices
5.5 Implement advanced location services
5.5.a Analytics
5.5.a.[i] Location (zone based)
5.5.a.[ii] Presence (site based)
5.5.b Visitor connect
5.5.c Describe AppEngage
5.5.d Facebook for Wi-Fi
5.6 Integrate MSE with PI
5.6.a Identify the relevant components to integrate the MSE with PI
5.6.b Identify the relevant steps to Integrate MSE with PI
5.6.c Identify the relevant steps required to Maintain MSE

6.0 Design and Implement FlexConnect Architecture 12%

6.1 Compare and contrast the components of FlexConnect architecture
6.1.a Local switching vs Central switching
6.1.b Local Auth vs Central Auth
6.1.c Connected mode vs Standalone mode
6.2 Describe and implement the capabilities of a FlexConnect group
6.2.a VLAN mapping
6.2.b ACLs
6.2.c AP Image upgrade
6.2.d Authentication and key management
6.2.e Central vs Local DHCP
6.3 Describe the impact of FlexConnect architecture on roaming
6.3.a ACLs
6.3.b Authentication
6.3.c Key management
6.3.d Real time application
6.4 Describe and implement Office Extend operation
6.4.a Configuration
6.4.a.[i] Controller
6.4.a.[ii] AP
6.4.b Split tunneling for printing and general traffic

7.0 Implement Controller and AP High Availability 10%

7.1 Configure the wireless network for high availability
7.1.a LAG vs Port based
7.1.b Backup primary and backup secondary outside of mobility group
7.1.c Anchor controller redundancy
7.2 Configure high availability for the AP
7.2.a AP fallback
7.2.b AP prioritization
7.2.c Legacy primary ,secondary, and tertiary
7.3 Configure high availability for the Controller
7.3.a AireOS
7.3.a.[i] Stateful switch over (SSO)
7.3.b IOS-XE
7.3.b.[i] Stateful switch over (SSO)
7.3.b.[ii] Stacking

8.0 Wireless Bridging (MESH) 10%

8.1 Describe the following MESH AP modes of operation
8.1.a RAP
8.1.b MAP
8.1.c Flex on MESH
8.2 Describe the considerations for a MESH deployment
8.2.a Hop count
8.2.b Backhaul caveats
8.2.c AP authorization
8.2.d Outdoor RF considerations
8.2.e VLAN transparent bridging
8.3 Describe the convergence of a MESH network
8.3.a Cisco AWPP
8.3.b Bridge group names
8.3.c Parent selection
8.3.d Fast convergence modes
8.3.e Re-convergence
8.4 Implement workgroup bridge
8.4.a Proprietary
8.4.a.[i] Reliable multicast
8.4.a.[ii] Roaming
8.4.b Universal
8.5 Describe the passive client feature
8.5.a No IP address learning
8.5.b Third party WGB support


Recent Posts


Tags

and/or Remove an End-Device and/or Remove an Infrastructure Device and/or Remove Cables (network and/or power) Cisco 642-997 DCUFI exam Cisco 642-999 DCUCI exam Configure Cisco Unity Connection Configure Cisco Unity Express using the GUI Describe and implement centralized call processing redundancy Describe Data Center Structure and Modularity Describe the Design Methodology Describe the Technologies used within the Data Center Describe WLAN Fundamentals Design and Deploy WLAN Infrastructure for Mobility Design Network Management Considerations into a Data Center Design the Access Layer of a Data Center General Networking Knowledge given a Network Design and a set of Requirements High Availability Routing Features Identify Cisco Equipment and Related Hardware Implement high availability features on Cisco Unified Fabric products in a Cisco Data Center Architecture Implement Multicast over Wireless Implement QoS for Wireless Applications Implement VoWLAN Infrastructure Security Infrastructure Services Install Integrate Client Device Security IP Services LAN Switching Technologies Layer 2 Technologies Layer 3 Technologies Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices Manage the Unified Fabric in a Cisco Data Center Architecture Monitoring and Reporting Tools Network Principles Replace Service-Related Knowledge Threat Defense Threat Defense Architectures Troubleshoot Call Setup Issues Troubleshooting Troubleshoot Registration Issues UCS Compute Troubleshooting VPN Technologies WAN Technologies

Links

Powered by CCNP Exams Test Base