Note:

  • The new CCNP Data Center certification required exams are 300-180 DCIT, 300-165 DCII, 300-160 DCID, 300-175 DCUCI and 300-170 DCVAI exams.
  • The last day to test Cisco 810-403 OUTCOMES exam is December 29, 2017.
  • The last day to test Cisco 820-424 BTASBVA exam is December 29, 2017.

Category Archives: CCNA Service Provider

01 Apr

640-878 SPNGN2 Building Cisco Service Provider Next-Generation Networks, Part 2

Building Cisco Service Provider Next-Generation Networks, Part 2 is the full name of 640-878 test. The Associated Certification is CCNA Service Provider. There are 65-75 questions in real Cisco 640-878 exam, which will take the candidates 90 minutes to complete the test. The available language is English. Candidates can register Cisco 640-878 exam at Pearson VUE testing center.

The 640-878 Building Cisco Service Provider Next-Generation Networks, Part 2 exam is associated with the Cisco CCNA Service Provider certification. Cisco 640-878 exam tests the knowledge and skills that are necessary to implement and support a service provider network.

Cisco 640-878 SPNGN2 Free Online Test Here

Knowing Cisco 640-878 exam topics are valuable in your preparation.

21% 1.0 IP NGN Architecture

1.1 Identify the functional components that are required to meet a given network specification
1.2 Troubleshoot common network problems at Layers 1, 2, 3, 4, and 7 using a layered-model approach
1.3 Describe the different types of service providers
1.4 Describe service provider principal and reference NGN architecture
1.5 Describe the IP address and AS number allocation process via IANA/RIRs

23% 2.0 Switched Network Technologies II

2.1 Configure enhanced switching technologies (including RSTP, MST, and PVSTP) on Cisco IOS Software switches
2.2 Describe how VLANs create logically separate networks and the need for routing between them
2.3 Configure VLANs on Cisco IOS Software switches
2.4 Configure trunking on Cisco IOS Software switches
2.5 Configure interVLAN routing
2.6 Configure REP on Cisco IOS Software switches
2.7 Configure QinQ on Cisco IOS Software switches

24% 3.0 Routed Network Technologies II

3.1 Configure basic single area OSPFv2 and OSPFv3 routing on Cisco routers
3.2 Configure basic single area IS-IS routing on Cisco routers
3.3 Describe the differences between static versus dynamic routing, as well as distance vector versus link-state routing protocol operations
3.4 Configure basic BGP routing on Cisco routers
3.5 Describe the address family concept on Cisco routers
3.6 Describe IPv6 transitioning technologies
3.7 Configure first hop router redundancy protocol (HSRP, VRRP, GLBP on Cisco routers
3.8 Implement ACL on Cisco routers
3.9 Describe Carrier Grade NAT and NAT64
3.10 Describe MPLS functions in the SP IP NGN
3.11 Configure LDP on Cisco routers

32% 4.0 Cisco Operating Systems and Platforms II

4.1 Manage the Cisco IOS XR configurations and software packages
4.2 Describe Cisco IOS XE software packages
4.3 Describe Cisco SP router platforms, their operating system and placement in the SP IP NGN

31 Mar

640-875 SPNGN1 Building Cisco Service Provider Next-Generation Networks Part 1

Building Cisco Service Provider Next-Generation Networks Part 1 is the exam name of 640-875 test. The Associated Certifications is CCNA Service Provider. There are 65-75 questions in real Cisco 640-875 test, which will take the candidates 90 minutes to complete the test. The available language is English. Candidates can register Cisco 640-875 exam at Pearson VUE testing center.

The 640-875 Building Cisco Service Provider Next-Generation Networks, Part 1 exam is associated with the Cisco CCNA Service Provider certification. Cisco 640-875 exam tests the basic knowledge and skills that are necessary to support a service provider network.

Cisco 640-875 SPNGN1 Free Online Test Here

Below are 640-875 exam topics for you to master the knowledge points.

12% 1.0 IP Networks

1.1 Describe the purpose and functions of various network devices (at the core, distribution, and access layers)
1.2 Identify the functional components that are required to meet a given network specification
1.3 Describe the OSI and TCP/IP models and their associated protocols to explain how data flows in a network
1.4 Describe common network applications and their impact on the network
1.5 Interpret network diagrams
1.6 Troubleshoot common network problems at Layers 1, 2, 3, 4, and 7 using a layered-model approach
1.7 Describe differences between LAN and WAN operation and features

13% 2.0 IPv4 and IPv6 Addressing

2.1 Describe the structure of IPv4 and IPv6 addresses
2.2 Describe VLSM, CIDR and route summarization concepts
2.3 Describe the different types of IPv4 and IPv6 addresses
2.4 Design an IP subnetting plan that is based on given requirements

12% 3.0 Switched Network Technologies I

3.1 Describe bridging concepts and Layer 2 Ethernet frames
3.2 Configure basic spanning tree operations on Cisco IOS switches
3.3 Interpret the output of various basic show and debug commands to verify the operational status of a Cisco switched network
3.4 Configure basic switch security (that is, port security and securing unused ports)
3.5 Describe Ethernet link bundling LACP, PAgP, and Flex Links

10% 4.0 Routed Network Technologies I

4.1 Describe classful versus classless routing
4.2 Describe routing protocols basics (metrics, IGP versus EGP)
4.3 Describe RIPv1, RIPv2, RIPNG
4.4 Implement EIGRPv4 and EIGRPv6 on Cisco IOS, IOS-XE and IOS-XR routers
4.5 Describe route redistribution
4.6 Describe VRF
4.7 Describe GRE

10% 5.0 IP Services

5.1 Configure NAT (IPv4) on Cisco routers
5.2 Configure DHCP (IPv4 and IPv6) operations on Cisco routers
5.3 Describe ICMPv4 and ICMPv6
5.4 Describe DNS

15% 6.0 Cisco Operating Systems and Platforms I

6.1 Implement basic Cisco IOS, IOS-XE, and IOS-XR CLI operations
6.2 Implement basic Cisco IOS, IOS-XE, and IOS-XR routers configurations

9% 7.0 Transport Technologies

7.1 Describe SONET and SDH
7.2 Describe DWDM, IPoDWDM, and ROADM
7.3 Configure 10 Gigabit Ethernet, 40 Gigabit Ethernet, and 100 Gigabit Ethernet interfaces on Cisco routers
7.4 Describe Frame Relay
7.5 Describe ATM
7.6 Describe Metro Ethernet
7.7 Describe DSL
7.8 Describe T1, T3, E1, E3, and ISDN
7.9 Implement PPP encapsulation on Cisco routers serial and POS interfaces
7.10 Describe cable (DOCSIS)
7.11 Describe the main BRAS and BNG routers functions in IP NGN
7.12 Describe various Passive Optical Network (PON) access technologies and FTTx

10% 8.0 Security in the Network

8.1 Describe Layer 2 security features on Cisco IOS switches
8.2 Configure management plane security on Cisco routers and IOS switches
8.3 Describe IPsec
8.4 Describe control plane security
8.5 Configure basic AAA (TACACS+ and RADIUS) services on Cisco routers
8.6 Configure routing protocols authentication between Cisco routers
8.7 Describe the relationships between users, user groups, tasks groups and task IDs in IOS-XR
8.8 Describe common types of network attacks

9% 9.0 Network Management

9.1 Configure NTP server or client on Cisco routers
9.2 Configure IP SLA on Cisco routers
9.3 Configure CDP on Cisco routers and IOS switches
9.4 Configure SNMP on Cisco routers
9.5 Configure NetFlow on Cisco routers
9.6 Configure logging to Syslog server on Cisco routers
9.7 Describe the Cisco IOS Call-Home feature
9.8 Describe Cisco TAC procedure and navigate Cisco support tools (CCO)
9.9 Implement management access (SSH, telnet, and out-of-band management design)
9.10 Implement SPAN, RSPAN, and ERSPAN
9.11 Implement file transfers to manage network devices configurations and images using FTP, SCP, TFTP, SFTP, and RCP

09 Feb

Cisco CCNA Service Provider Certification

As we all know, 640-875 SPNGN1 and 640-878 SPNGN2 exams are required ones for Cisc CCNA Service Provider Certification.

Cisco Certified Network Associate Service Provider (CCNA SP) certification is for service provider network engineers, technicians and designers who focus on the latest in Service Provider industry core networking technologies and trends.

With the ability to configure, implement, and troubleshoot baseline Cisco Service Provider Next-Generation networks, CCNA SP certified individuals deploy, maintain and improve carrier-grade network infrastructures.

What’s more, 640-875 SPNGN1 free online test and 640-878 SPNGN2 free online test are available for the candidates to practice 20 questions. Do it now.

 


Recent Posts


Tags

and/or Remove an End-Device and/or Remove an Infrastructure Device and/or Remove Cables (network and/or power) Cisco 642-997 DCUFI exam Cisco 642-999 DCUCI exam Configure Cisco Unity Connection Configure Cisco Unity Express using the GUI Describe and implement centralized call processing redundancy Describe Data Center Structure and Modularity Describe the Design Methodology Describe the Technologies used within the Data Center Describe WLAN Fundamentals Design and Deploy WLAN Infrastructure for Mobility Design Network Management Considerations into a Data Center Design the Access Layer of a Data Center General Networking Knowledge given a Network Design and a set of Requirements High Availability Routing Features Identify Cisco Equipment and Related Hardware Implement high availability features on Cisco Unified Fabric products in a Cisco Data Center Architecture Implement Multicast over Wireless Implement QoS for Wireless Applications Implement VoWLAN Infrastructure Security Infrastructure Services Install Integrate Client Device Security IP Services LAN Switching Technologies Layer 2 Technologies Layer 3 Technologies Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices Manage the Unified Fabric in a Cisco Data Center Architecture Monitoring and Reporting Tools Network Principles Replace Service-Related Knowledge Threat Defense Threat Defense Architectures Troubleshoot Call Setup Issues Troubleshooting Troubleshoot Registration Issues UCS Compute Troubleshooting VPN Technologies WAN Technologies

Links

Powered by CCNP Exams Test Base