Note:

  • The new CCNP Data Center certification required exams are 300-180 DCIT, 300-165 DCII, 300-160 DCID, 300-175 DCUCI and 300-170 DCVAI exams.
  • The last day to test Cisco 810-403 OUTCOMES exam is December 29, 2017.
  • The last day to test Cisco 820-424 BTASBVA exam is December 29, 2017.

Category Archives: 642-737 IAUWS Exam

12 Dec

cisco certification 642-737 iauws books

642-737 IAUWS is a required one for CCNP Wireless certification. cisco certification 642-737 iauws books are available for the candidates to prepare the test. Besides, 642-732 CUWSS642-742 IUWVN and 642-747 IUWMS are also required for Cisco CCNP Wireless certification.

Cisco Certified Network Professional Wireless (CCNP Wireless) certification addresses the need for designing, implementing, and operating Cisco Wireless networks and mobility infrastructures. CCNP Wireless certification emphasizes wireless networking principles and theory.

Share sample question of cisco certification 642-737 iauws books below.

Employees are allowed to start bringing their own wireless devices to work for use on the 802.11a/b/g/n WLAN when using their existing credentials. However, they are experiencing issues. Which two items are the most probable cause of these issues? (Choose two.)
A. incorrect IP address
B. supplicant or driver
C. incorrect user name
D. wrong wireless band
E. application issues
Answer: B,E

Get full version of cisco certification 642-737 iauws books here.

 

 

 

28 Oct

cisco 642-737 iauws exam preparation

cisco 642-737 iauws exam preparation is available. This Cisco 642-737 IAUWS exam assesses a candidate’s capability to secure the wireless network from security threats via appropriate security policies and best practices, to properly implement security standards, and to properly configure wireless security components.

cisco 642-737 iauws exam preparation exam objectives are below.

22% 1.0 Integrate Client Device Security

1.1 Describe Extensible Authentication Protocol (EAP) authentication process
1.2 Configure client for secure EAP authentication
1.3 Configure the AnyConnect client
1.4 Describe the impact of security configurations on application and client roaming
1.5 Troubleshoot client wireless authentication issues
1.5.a Packet analyzers
1.5.b Debugs
1.5.c Logs
1.5.d Cisco Wireless Control System (WCS)
1.5.e Access Control Server (ACS)
1.6 Identify client security risks
1.6.a driver update
1.6.b MS hot fixes

11% 2.0 Design and Integrate Wireless Network with NAC

2.1 Describe the architectures
2.1.a inband
2.1.b out-of-band
2.1.c agent vs. agentless
2.1.d Cisco Network Admission Control (NAC) appliance
2.2 Describe the high-level authentication process flow
2.2.a CAS
2.2.b CAM
2.2.c RADIUS/ACS
2.2.d Wireless LAN controller (WLC)
2.2.e External authentication sources
2.3 Configure the WLC for Network Access Controller (NAC)
2.4 Verify wireless authentication with NAC

Practice cisco 642-737 iauws exam preparation here. 

 

19 Sep

Cisco 642-737 IAUWS Online Test Questions

Cisco 642-737 IAUWS online test questions are available now. There are 50-60 questions in real Cisco 642-737 IAUWS exam, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 642-737 IAUWS exam at Pearson VUE testing center.

Share some Cisco 642-737 IAUWS online test questions below.

Employees are allowed to start bringing their own wireless devices to work for use on the 802.11a/b/g/n WLAN when using their existing credentials. However, they are experiencing issues. Which two items are the most probable cause of these issues? (Choose two.)
A. incorrect IP address
B. supplicant or driver
C. incorrect user name
D. wrong wireless band
E. application issues
Answer: B,E

Employees adjust their wireless laptop for work at the office and when away from the office. What are the two most likely security issues for an employee laptop when connected at the corporate WLAN? (Choose two.)
A. loading a freeware customer contact application
B. configuring a static IP address
C. updating the driver
D. adding a coffee shop wireless HotSpot
Answer: A,C

Cisco 642-737 IAUWS  online test questions, 642-737 IAUWS  practice questions

Which two options are supported when deploying wireless NAC out-of-band implementations? (Choose two.)
A. Cisco NAS in virtual gateway mode
B. WLANs with allow AAA override enabled
C. Cisco NAC Guest Server integration with the Cisco NAM
D. dynamic VLAN mappings on the Cisco NAS, which is based on the returned RADIUS attributes from the Cisco Secure ACS
E. autonomous APs
Answer: A,C

When deploying wireless Cisco NAC OOB operations, which appliance performs VLAN mappings to map the quarantine VLANs to the access VLANs?
A. Cisco NAC Appliance Manager
B. Cisco NAC Appliance Server
C. Cisco NAC Guest Server
D. Cisco Wireless LAN Controller
E. the Layer 3 switch that connects the Cisco WLC to the Cisco NAC appliances
Answer: B

Get more Cisco 642-737 IAUWS online test questions here.

 

09 Sep

642-737 IAUWS Implementing Advanced Cisco Unified Wireless Security

The Implementing Advanced Cisco Unified Wireless Security exam is the exam associated with the CCNP Wireless certification. This Cisco 642-737 IAUWS exam assesses a candidate’s capability to secure the wireless network from security threats via appropriate security policies and best practices, to properly implement security standards, and to properly configure wireless security components.

Implementing Advanced Cisco Unified Wireless Security is the full name of 642-737 IAUWS test. The Associated Certification is CCNP Wireless. There are 50-60 questions in real Cisco 642-737 IAUWS exam, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 642-737 IAUWS exam at Pearson VUE testing center.

It is important for the candidates to know Cisco 642-737 IAUWS exam topics.

22% 1.0 Integrate Client Device Security

1.1 Describe Extensible Authentication Protocol (EAP) authentication process
1.2 Configure client for secure EAP authentication
1.3 Configure the AnyConnect client
1.4 Describe the impact of security configurations on application and client roaming
1.5 Troubleshoot client wireless authentication issues
1.5.a Packet analyzers
1.5.b Debugs
1.5.c Logs
1.5.d Cisco Wireless Control System (WCS)
1.5.e Access Control Server (ACS)
1.6 Identify client security risks
1.6.a driver update
1.6.b MS hot fixes

11% 2.0 Design and Integrate Wireless Network with NAC

2.1 Describe the architectures
2.1.a inband
2.1.b out-of-band
2.1.c agent vs. agentless
2.1.d Cisco Network Admission Control (NAC) appliance
2.2 Describe the high-level authentication process flow
2.2.a CAS
2.2.b CAM
2.2.c RADIUS/ACS
2.2.d Wireless LAN controller (WLC)
2.2.e External authentication sources
2.3 Configure the WLC for Network Access Controller (NAC)
2.4 Verify wireless authentication with NAC

22% 3.0 Implement Secure Wireless Connectivity Services

3.1 Configure authentication
3.1.a Controller Local EAP with or without external Lightweight B. Directory Access
3.1.b Protocol (LDAP) database
3.1.c Client authentication on H-REAP access points (APs)
3.1.d 802.1X authentication for AP authentication to the switch
3.2 Configure autonomous AP for RADIUS authentication
3.3 Configure management frame protection on clients, APs and controllers
3.4 Configure IBN
3.4.a RADIUS based VLAN and ACLs
3.4.b AAA override
3.5 Define ACS parameters for integration with wireless network
3.6 Define client and server-side digital certificate requirements
3.7 Implement ACLs on controller
3.7.a CPU ACLs
3.7.b WLAN, interface, and client identity ACL
3.8 Troubleshoot secure wireless connectivity services
3.8.a Packet analyzers, debugs, logs, WCS, and ACS
3.8.b Verify firewall ports
3.8.c ACS and Controller authorization and authentication for clients

12% 4.0 Design and implement Guest Access Service

4.1 Describe the architectures for guest access services
4.1.a VLAN-based
4.1.b Anchor, DMZ, redundancy, and scaling
4.1.c NAC guest server
4.1.d Wired guest access
4.1.e Bandwidth limiting
4.2 Configure guest access accounts
4.2.a Lobby ambassador (controller and WCS-based)
4.2.b Guest roles
4.3 Configure controller web authentication
4.3.a Pass through
4.3.b Internal and external
4.3.c Authentication (local/RADIUS)
4.3.d Custom splash page (internal, external, and per WLAN)
4.3.e Understand design considerations (DNS, proxy)
4.3.f Pre-authentication ACL
4.3.g Wired guest access
4.3.h Install third party certificate on controller
4.4 Configure the anchor and internal controllers
4.5 Troubleshoot guest access issues
4.5.a Packet analyzers, debugs, logs, WCS, and ACS
4.5.b Verify firewall ports
4.5.c Mping and eping
4.5.d Proxies

11% 5.0 Translate Organizational and Regulatory Security Policies and Enforce Security Compliances

5.1 Describe Regulatory Compliance Considerations, such as HIPAA, PCI, SOX, and FERPA
5.1.a HIPAA
5.1.b PCI
5.1.c SOX
5.1.d FERPA
5.2 Segment traffic into different VLANs, based upon
5.2.a Security
5.2.b Application
5.2.c QoS
5.3 Configure administration security on controller and WCS
5.3.a TACACS+ and ACS integration
5.3.b Local
5.3.c RADIUS and AAA server integration
5.3.d Access point administration credential
5.3.e Admin roles
5.4 Manage WLC and WCS alarms
5.4.a SNMP and Trap receivers
5.4.b Syslog
5.4.c SMTP
5.4.d ACS log
5.4.e Modify WCS alarm levels
5.5 Utilize security audit tools
5.5.a Packet captures
5.5.b Penetration testing
5.5.c Third-party software (AirMagnet AirWise)
5.5.d PCI Audit tool in WCS

11% 6.0 Configure Native WLC security Feature Sets – IPS/IDS

6.1 Utilize WCS or controller for IDS and threat mitigation strategies
6.1.a Signature
6.1.b Custom signature
6.1.c Rogue classification management and (auto) containment
6.1.d Rogue reporting/location (WCS only)
6.1.e Switchport tracing (WCS only)
6.1.f Integrate Cisco spectrum expert to WCS
6.1.g Client exclusion
6.1.h CleanAir
6.2 Identify and mitigate wireless vulnerabilities
6.2.a Wireless packet injection (can’t be mitigated)
6.2.b Client misconfiguration
6.2.c DoS (RF jamming)
6.2.d Anomalous behavior attacks (association and authentication attacks)
6.2.e Signature attacks (NetStumbler and undetectable at this time
6.2.f Eavesdropping (wild packets and Honeypot)
6.2.g Hijacking/mimicry (evil Twin and HoneyPotting)
6.2.h Social engineering (human attack)

11% 7.0 Integrate Wireless Network with Advanced Security Platforms

7.1 Describe end-to-end security Solutions of Cisco and how they Integrate with the Cisco Wireless Solutions
7.1.a AnyConnect 3.0 and above
7.1.b NAC appliance
7.1.c NAC guest server
7.1.d Wired IPS
7.1.e ACS
7.2 Describe the CUWN firewall port configuration requirements
7.2.a Access control lists (ACLs)
7.2.b IP port pass-through
7.2.c DMZ
7.3 Configure the controller for wired IPS/IDS
7.4 Configure wireless Intrusion Prevention System (IPS) (MSE)

Related resource: http://www.cisco.com/web/learning/exams/list/iauws.html#~Topics

 

08 Aug

642-737 IAUWS Online Test-Implementing Advanced Cisco Unified Wireless Security (IAUWS) v2.0

Currently, our 642-737 IAUWS online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

When deploying wireless Cisco NAC OOB operations, which appliance performs VLAN mappings to map the quarantine VLANs to the access VLANs?

 
 
 
 
 

Which two options are supported when deploying wireless NAC out-of-band implementations? (Choose two.)

 
 
 
 
 

Employees adjust their wireless laptop for work at the office and when away from the office. What are the two most likely security issues for an employee laptop when connected at the corporate WLAN? (Choose two.)

 
 
 
 

Employees are allowed to start bringing their own wireless devices to work for use on the 802.11a/b/g/n WLAN when using their existing credentials. However, they are experiencing issues. Which two items are the most probable cause of these issues? (Choose two.)

 
 
 
 
 

What is the best method to verify AP parameters that are seen from a wireless client?

 
 
 
 
 

Which three Cisco WLC v7.0 CLI family of commands would be appropriate to troubleshoot a wireless client failure for connection to an AP? (Choose three.)

 
 
 
 
 
 
 

Which three parameters can be communicated between a Cisco WLC v7.0 and Cisco Compatible Extensions v4-enabled client to improve a secure roaming connection? (Choose three.)

 
 
 
 
 
 

Which two parameters can directly affect client roaming decisions? (Choose two.)

 
 
 
 
 

When using the Standalone Profile Editor in the Cisco Any Connect v3.0 to create a new NAM profile, which two statements describe the profile becoming active? (Choose two.)

 
 
 
 
 
 

What are two of the benefits that the Cisco Any Connect v3.0 provides to the administrator for client WLAN security configuration? (Choose two.)

 
 
 
 
 
 

Question 1 of 10

 

cart

 

 

 


Recent Posts


Tags

and/or Remove an End-Device and/or Remove an Infrastructure Device and/or Remove Cables (network and/or power) Cisco 642-997 DCUFI exam Cisco 642-999 DCUCI exam Configure Cisco Unity Connection Configure Cisco Unity Express using the GUI Describe and implement centralized call processing redundancy Describe Data Center Structure and Modularity Describe the Design Methodology Describe the Technologies used within the Data Center Describe WLAN Fundamentals Design and Deploy WLAN Infrastructure for Mobility Design Network Management Considerations into a Data Center Design the Access Layer of a Data Center General Networking Knowledge given a Network Design and a set of Requirements High Availability Routing Features Identify Cisco Equipment and Related Hardware Implement high availability features on Cisco Unified Fabric products in a Cisco Data Center Architecture Implement Multicast over Wireless Implement QoS for Wireless Applications Implement VoWLAN Infrastructure Security Infrastructure Services Install Integrate Client Device Security IP Services LAN Switching Technologies Layer 2 Technologies Layer 3 Technologies Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices Manage the Unified Fabric in a Cisco Data Center Architecture Monitoring and Reporting Tools Network Principles Replace Service-Related Knowledge Threat Defense Threat Defense Architectures Troubleshoot Call Setup Issues Troubleshooting Troubleshoot Registration Issues UCS Compute Troubleshooting VPN Technologies WAN Technologies

Links

Powered by CCNP Exams Test Base