Note:

  • The new CCNP Data Center certification required exams are 300-180 DCIT, 300-165 DCII, 300-160 DCID, 300-175 DCUCI and 300-170 DCVAI exams.
  • The last day to test Cisco 810-403 OUTCOMES exam is December 29, 2017.
  • The last day to test Cisco 820-424 BTASBVA exam is December 29, 2017.

Category Archives: 642-732 CUWSS Exam

31 Oct

ccnp 642-732 cuwss self study

ccnp 642-732 cuwss self study is available. This Cisco 642-732 CUWSS exam assesses a candidate’s capability to plan and conduct a wireless site survey, to design the RF network and to conduct a post installation assessment to ensure compliancy.

ccnp 642-732 cuwss self study objectives are below.

16% 2.0 Plan for the Site Survey

2.1 Select proper survey mode
2.1.a Data
2.1.b Voice
2.1.c Video
2.1.d Location
2.1.e Bridging (point-to-point; point-to-multipoint)
2.1.f Hybrid
2.2 Determine proper deployment characteristics
2.2.a Dense deployment
2.2.b Highly mobile (Many cells, high-reliability, and fast-moving clients) vs. nomadic (temporary position)
2.2.c Indoor and outdoor mesh
2.2.d Use Predictive Cisco Wireless Control System (WCS) planning tools
2.3 Select survey equipment
2.4 Determine site survey best practices for customer environment
2.5 Identify impact of material attenuation
2.6 Identify survey documentation needed for customer report

30% 3.0 Conduct the Site Survey

3.1 Conduct a Layer 1 survey (Cisco Spectrum Expert)
3.2 Select proper antenna to conduct the site survey
3.3 Conduct the Layer 2 site survey for indoor environment
3.3.a Select proper access point to conduct the site survey (use what is purchased)
3.3.b Configure access point
3.3.c Survey with proper client
3.3.d Utilize proper survey techniques
3.4 Conduct the Layer 2 site survey for outdoor point-to-point and point- to-multipoint networks
3.5 Conduct the Layer 2 site survey for outdoor mesh network

Practice ccnp 642-732 cuwss self study here.

 

23 Sep

Real Cisco 642-732 CUWSS Questions and Answers

Real Cisco 642-732 CUWSS questions and answers are available, which are helpful in your preparation. There are 50-60 questions in real Cisco 642-732 CUWSS test, which will take the candidates 75 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 642-732 CUWSS exam at Pearson VUE testing center.

Share real Cisco 642-732 CUWSS questions and answers below.

You have been contacted by a medium-sized hospitality company that has 50 hotels. They would like to
upgrade their existing WLAN in each hotel to 802.11n. While performing the site surveys for each hotel,
what are the issues that you need to take into consideration when determining the locations for each AP?
A. Selecting AP locations where power is already available.
B. Selecting APs that can be hidden in ceiling panels to provide a secure and clean aesthetic look.
C. Selecting locations that are easily accessed so maintenance and upgrades can be performed quickly
D. Selecting locations that make visual assessment of the AP operation easy.
Answer: B

During the site survey kick-off meeting with your customer, they ask why you need to verify the existing
network infrastructure. Which two reasons do you give them? (Choose two.)
A. You need to verify the make, model, and software versions of all the equipment that will connect to the
WLAN components in order to ensure compatibility.
B. You need to verify that the equipment the WLAN components will connect to has sufficient memory
capacity to support the additional WLAN connections.
C. You need to verify that there are sufficient switch ports to support the new WLAN connections.
D. You need to verify that the switches the WLAN components will connect to can supply 802.3af inline
power, and that they have sufficient ports to support all the new WLAN devices.
E. Depending on the type of APs that are planned for, the deployment may require different types of PoE
to be supplied by the LAB switches.
Answer: C,D

Get more Cisco 642-732 CUWSS exam questions and answers here.

 

 

 

05 Sep

642-732 CUWSS Conducting Cisco Unified Wireless Site Survey

The CUWSS Conducting Cisco Unified Wireless Site Survey exam is the exam associated with the CCNP Wireless certification. This Cisco 642-732 CUWSS exam assesses a candidate’s capability to plan and conduct a wireless site survey, to design the RF network and to conduct a post installation assessment to ensure compliancy.

Conducting Cisco Unified Wireless Site Survey is the exam name of 642-732 CUWSS test. The Associated Certification is CCNP Wireless. There are 50-60 questions in real Cisco 642-732 CUWSS test, which will take the candidates 75 minutes to complete teh test. The available languages are English and Japanese. Candidates can register Cisco 642-732 CUWSS exam at Pearson VUE testing center.

Cisco 642-732 CUWSS exam topics cover the following sections.

16% 1.0 Prepare for the Site Survey

1.1 Identify customer requirements
1.1.a Business and RF application needs (voice, data, location)
1.1.b Industry vertical
1.1.c Customer questionnaire
1.2 Identify customer facility requirements
1.2.a Single-floor
1.2.b Multi-floor
1.2.c Campus (indoor and outdoor)
1.2.d Warehouse
1.2.e Obtain digital floor plans from customer
1.3 Identify customer requirements for type of client devices
1.4 Identify regulatory issues
1.4.a Country codes (-e, -i, -a, -n)
1.5 Identify safety and aesthetic considerations
1.5.a NEC Ratings
1.5.b Fire codes
1.5.c OSHA
1.5.d MSHA
1.5.e Site-specific hazard awareness
1.6 Assess existing network infrastructure
1.7 Assess logistical considerations
1.7.a Resources
1.7.b Time
1.7.c Access
1.7.d Deployment requirements
1.8 Determine 802.11n impact on network infrastructure

16% 2.0 Plan for the Site Survey

2.1 Select proper survey mode
2.1.a Data
2.1.b Voice
2.1.c Video
2.1.d Location
2.1.e Bridging (point-to-point; point-to-multipoint)
2.1.f Hybrid
2.2 Determine proper deployment characteristics
2.2.a Dense deployment
2.2.b Highly mobile (Many cells, high-reliability, and fast-moving clients) vs. nomadic (temporary position)
2.2.c Indoor and outdoor mesh
2.2.d Use Predictive Cisco Wireless Control System (WCS) planning tools
2.3 Select survey equipment
2.4 Determine site survey best practices for customer environment
2.5 Identify impact of material attenuation
2.6 Identify survey documentation needed for customer report

30% 3.0 Conduct the Site Survey

3.1 Conduct a Layer 1 survey (Cisco Spectrum Expert)
3.2 Select proper antenna to conduct the site survey
3.3 Conduct the Layer 2 site survey for indoor environment
3.3.a Select proper access point to conduct the site survey (use what is purchased)
3.3.b Configure access point
3.3.c Survey with proper client
3.3.d Utilize proper survey techniques
3.4 Conduct the Layer 2 site survey for outdoor point-to-point and point- to-multipoint networks
3.5 Conduct the Layer 2 site survey for outdoor mesh network

12% 4.0 Design the RF Network

4.1 Determine infrastructure requirements
4.1.a AC power and Power over Ethernet (PoE)
4.1.b Understand cableplant considerations
4.1.c Mounting considerations National Electrical Manufacturers Association (NEMA)
4.1.d Outdoor grounding and lightning protection
4.1.e Rack capacity
4.1.f Switch port capacity
4.2 Determine the AP count and subsequent controller and license requirements
4.2.a Autonomous vs. controller-based deployment
4.3 Generate the WLAN design documentation
4.3.a Indoor
4.3.b Outdoor mesh
4.3.c Outdoor point-to-point and multipoint

26% 5.0 Conduct Post Deployment Assessment

5.1 Verify RF coverage
5.1.a Utilize tools (for example, AirMagnet) for audit
5.1.b RRM, controller, network appliance tweaks
5.2 Verify network applications and performance
5.2.a Apply WCS tools (voice readiness, location readiness, site calibration)
5.3 Reconcile any deployment issues
5.4 Assemble and deliver installation report to customer

08 Aug

642-732 CUWSS Online Test-Conducting Cisco Unified Wireless Site Survey (CUWSS) v2.0

The last day to test 642-732 CUWSS is September 21, 2016. The new one is 300-360 WIDESIGN. Try 300-360 WIDESIGN free online test here.

Currently, our 642-732 CUWSS online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

Which three statements describe WLAN RF interaction with environmental situations? (Choose three.)

 
 
 
 
 
 

Which three components and tasks should be considered while planning the site survey? (Choose three.)

 
 
 
 
 
 
 

When planning to perform a customer WLAN site survey, which three components and tasks should be considered? (Choose three.)

 
 
 
 
 
 
 
 

Which wireless tool would be most useful in planning a WLAN solution prior to performing a site survey?

 
 
 
 
 

What is the recommended method to protect a wireless outdoor bridge from lightning?

 
 
 
 
 

Which two issues do access and backhaul radios experience in mesh networks? (Choose two.)

 
 
 
 
 

Which option allows the maximum 2.4-GHz channel usage for a survey and data deployment in the ETSI domain?

 
 
 
 

You have a multinational customer that would like you to perform a wireless site survey for a new manufacturing facility in Singapore. They have had a local vendor install a point-to-point wireless bridge link between two buildings 1 km apart. The ground between the buildings is flat but because facilities are in the mountains, dense fog is an issue. There are no line of sight issues between the buildings. The linkis experiencing errors and throughput issues. Currently the two radios are set to operate at 2.4 GHz and the transmit power is set to 7 dBm with 7 dBm antennas. What do you need to take into consideration when performing the site survey for this link?

 
 
 
 

The customer has an existing 802.11b/g network with Cisco 2500 controllers. The customer would like to migrate to an 802.11a/b/g/n WLAN. Which network infrastructure issue might impact client performance in this proposed controller-based solution?

 
 
 
 

After having the kick-off meeting for a new site survey project with your customer, which three factors need to be considered prior to beginning a WLAN site survey? (Choose three.)

 
 
 
 
 
 

Question 1 of 10

 

cart

 

 

 

 


Recent Posts


Tags

and/or Remove an End-Device and/or Remove an Infrastructure Device and/or Remove Cables (network and/or power) Cisco 642-997 DCUFI exam Cisco 642-999 DCUCI exam Configure Cisco Unity Connection Configure Cisco Unity Express using the GUI Describe and implement centralized call processing redundancy Describe Data Center Structure and Modularity Describe the Design Methodology Describe the Technologies used within the Data Center Describe WLAN Fundamentals Design and Deploy WLAN Infrastructure for Mobility Design Network Management Considerations into a Data Center Design the Access Layer of a Data Center General Networking Knowledge given a Network Design and a set of Requirements High Availability Routing Features Identify Cisco Equipment and Related Hardware Implement high availability features on Cisco Unified Fabric products in a Cisco Data Center Architecture Implement Multicast over Wireless Implement QoS for Wireless Applications Implement VoWLAN Infrastructure Security Infrastructure Services Install Integrate Client Device Security IP Services LAN Switching Technologies Layer 2 Technologies Layer 3 Technologies Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices Manage the Unified Fabric in a Cisco Data Center Architecture Monitoring and Reporting Tools Network Principles Replace Service-Related Knowledge Threat Defense Threat Defense Architectures Troubleshoot Call Setup Issues Troubleshooting Troubleshoot Registration Issues UCS Compute Troubleshooting VPN Technologies WAN Technologies

Links

Powered by CCNP Exams Test Base