Note:

  • The new CCNP Data Center certification required exams are 300-180 DCIT, 300-165 DCII, 300-160 DCID, 300-175 DCUCI and 300-170 DCVAI exams.
  • The last day to test Cisco 810-403 OUTCOMES exam is December 29, 2017.
  • The last day to test Cisco 820-424 BTASBVA exam is December 29, 2017.

Category Archives: 300-206 SENSS Exam

11 Dec

cisco ccnp security 300-206 senss torrent

cisco ccnp security 300-206 senss torrent is available for the candidates to prepare CCNP security certification. Besides this test, candidates also need to take 300-207 SITCS300-208 SISAS and 300-209 SIMOS exam to get CCNP Security certification.

ccnp2015 xmas

Cisco Certified Network Professional Security (CCNP Security) certification program is aligned specifically to the job role of the Cisco Network Security Engineer responsible for Security in Routers, Switches, Networking devices and appliances, as well as choosing, deploying, supporting and troubleshooting Firewalls, VPNS, and IDS/IPS solutions for their networking environments.

Valid CCNA Security Certification or any CCIE Certification is a prerequisite for Cisco CCNP security certification. Share sample question of Cisco 300-206 senss exam.

A network administrator is creating an ASA-CX administrative user account with the following parameters:
-The user will be responsible for configuring security policies on network devices.
-The user needs read-write access to policies.
-The account has no more rights than necessary for the job.
What role will be assigned to the user?
A. Administrator
B. Security administrator
C. System administrator
D. Root Administrator
E. Exec administrator
Answer: B

Full version of Cisco 300-206 senss test here. 

 

19 Nov

cisco 300-206 senss boot camp training

cisco 300-206 senss boot camp training is available. The Implementing Cisco Edge Network Security (SENSS) (300-206) exam tests the knowledge of a network security engineer to configure and implement security on Cisco network perimeter edge devices such as a Cisco switch, Cisco router, and Cisco ASA firewall.

This 90-minute 300-206 senss exam consists of 65-75 questions and focuses on the technologies used to strengthen security of a network perimeter such as Network Address Translation (NAT), ASA policy and application inspect, and a zone-based firewall on Cisco routers. Below are the details of Cisco 300-206 senss exam objectives.

25% 2.0 Cisco Security Devices GUIs and Secured CLI Management

2.1 Implement SSHv2, HTTPS, and SNMPv3 access on the network devices
2.2 Implement RBAC on the ASA/IOS using CLI and ASDM
2.3 Describe Cisco Prime Infrastructure
2.3.a Functions and use cases of Cisco Prime
2.3.b Device Management
2.4 Describe Cisco Security Manager (CSM)
2.4.a Functions and use cases of CSM
2.4.b Device Management
2.5 Implement Device Managers
2.5.a Implement ASA firewall features using ASDM

12% 3.0 Management Services on Cisco Devices

3.1 Configure NetFlow exporter on Cisco Routers, Switches, and ASA
3.2 Implement SNMPv3
3.2.a Create views, groups, users, authentication, and encryption
3.3 Implement logging on Cisco Routers, Switches, and ASA using Cisco best practices
3.4 Implement NTP with authentication on Cisco Routers, Switches, and ASA
3.5 Describe CDP, DNS, SCP, SFTP, and DHCP
3.5.a Describe security implications of using CDP on routers and switches
3.5.b Need for dnssec

Practice cisco 300-206 senss boot camp training here.

 

 

11 Oct

cisco certification 300-206 senss kits

cisco certification 300-206 senss kits are available for the candidates to prepare the test well. The Associated Certification is CCNP Security. There are 65-75 questions in real Cisco 300-206 SENSS exam, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 300-206 SENSS exam at Pearson VUE testing center.

Share cisco certification 300-206 senss kits below.

Which tool provides the necessary information to determine hardware lifecycle and compliance details for deployed network devices?
A. Prime Infrastructure
B. Prime Assurance
C. Prime Network Registrar
D. Prime Network Analysis Module
Answer: A

Which three compliance and audit report types are available in Cisco Prime Infrastructure? (Choose three.)
A. Service
B. Change Audit
C. Vendor Advisory
D. TAC Service Request
E. Validated Design
F. Smart Business Architecture
Answer: A,B,C

Cisco Security Manager can manage which three products? (Choose three.)
A. Cisco IOS
B. Cisco ASA
C. Cisco IPS
D.Cisco WLC
E. Cisco Web Security Appliance
F. Cisco Email Security Appliance
G. Cisco ASA CX
H. Cisco CRS
Answer: A,B,C

Get more cisco certification 300-206 senss kits here. 

 

 

18 Aug

300-206 SENSS Implementing Cisco Edge Network Security Solutions

The Implementing Cisco Edge Network Security (SENSS) (300-206) exam tests the knowledge of a network security engineer to configure and implement security on Cisco network perimeter edge devices such as a Cisco switch, Cisco router, and Cisco ASA firewall. This 90-minute exam consists of 65-75 questions and focuses on the technologies used to strengthen security of a network perimeter such as Network Address Translation (NAT), ASA policy and application inspect, and a zone-based firewall on Cisco routers.

Implementing Cisco Edge Network Security Solutions is the full name of 300-206 SENSS. The Associated Certification is CCNP Security. There are 65-75 questions in real Cisco 300-206 SENSS exam, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 300-206 SENSS exam at Pearson VUE testing center.

Cisco 300-206 SENSS exam topics cover the following sections, which are valuable in your preparation.

25% 1.0 Threat Defense

1.1 Implement firewall (ASA or IOS depending on which supports the implementation)
1.1.a Implement ACLs
1.1.b Implement static/dynamic NAT/PAT
1.1.c Implement object groups
1.1.d Describe threat detection features
1.1.e Implement botnet traffic filtering
1.1.f Configure application filtering and protocol inspection
1.1.g Describe ASA security contexts
1.2 Implement Layer 2 security
1.2.a Configure DHCP snooping
1.2.b Describe dynamic ARP inspection
1.2.c Describe storm control
1.2.d Configure port security
1.2.e Describe common Layer 2 threats and attacks and mitigation
1.2.f Describe MACSec
1.2.g Configure IP source verification
1.3 Configure device hardening per best practices
1.3.a Routers
1.3.b Switches
1.3.c Firewalls

25% 2.0 Cisco Security Devices GUIs and Secured CLI Management

2.1 Implement SSHv2, HTTPS, and SNMPv3 access on the network devices
2.2 Implement RBAC on the ASA/IOS using CLI and ASDM
2.3 Describe Cisco Prime Infrastructure
2.3.a Functions and use cases of Cisco Prime
2.3.b Device Management
2.4 Describe Cisco Security Manager (CSM)
2.4.a Functions and use cases of CSM
2.4.b Device Management
2.5 Implement Device Managers
2.5.a Implement ASA firewall features using ASDM

12% 3.0 Management Services on Cisco Devices

3.1 Configure NetFlow exporter on Cisco Routers, Switches, and ASA
3.2 Implement SNMPv3
3.2.a Create views, groups, users, authentication, and encryption
3.3 Implement logging on Cisco Routers, Switches, and ASA using Cisco best practices
3.4 Implement NTP with authentication on Cisco Routers, Switches, and ASA
3.5 Describe CDP, DNS, SCP, SFTP, and DHCP
3.5.a Describe security implications of using CDP on routers and switches
3.5.b Need for dnssec

10% 4.0 Troubleshooting, Monitoring and Reporting Tools

4.1 Monitor firewall using analysis of packet tracer, packet capture, and syslog
4.1.a Analyze packet tracer on the firewall using CLI/ASDM
4.1.b Configure and analyze packet capture using CLI/ASDM
4.1.c Analyze syslog events generated from ASA

16% 5.0 Threat Defense Architectures

5.1 Design a Firewall Solution
5.1.a High-availability
5.1.b Basic concepts of security zoning
5.1.c Transparent & Routed Modes
5.1.d Security Contexts
5.2 Layer 2 Security Solutions
5.1.a Implement defenses against MAC, ARP, VLAN hopping, STP, and DHCP rogue attacks
5.1.b Describe best practices for implementation
5.1.c Describe how PVLANs can be used to segregate network traffic at Layer 2

12% 6.0 Security Components and Considerations

6.1 Describe security operations management architectures
6.1.a Single device manager vs. multi-device manager
6.2 Describe Data Center security components and considerations
6.2.a Virtualization and Cloud security
6.3 Describe Collaboration security components and considerations
6.3.a Basic ASA UC Inspection features
6.4 Describe common IPv6 security considerations
6.4.a Unified IPv6/IPv4 ACL on the ASA

06 Aug

300-206 SENSS Online Test-Implementing Cisco Edge Network Security Solutions

Currently, our 300-206 SENSS online test only provide 20 questions. Answer one question correctly, you can get 5 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

Cisco Security Manager can manage which three products? (Choose three.)

 
 
 
 
 
 
 
 

Which three compliance and audit report types are available in Cisco Prime Infrastructure? (Choose three.)

 
 
 
 
 
 

Which tool provides the necessary information to determine hardware lifecycle and compliance details for deployed network devices?

 
 
 
 

A network administrator is creating an ASA-CX administrative user account with the following parameters:
-The user will be responsible for configuring security policies on network devices.
-The user needs read-write access to policies.
-The account has no more rights than necessary for the job.
What role will be assigned to the user?

 
 
 
 
 

The Cisco Email Security Appliance can be managed with both local and external users of different privilege levels. What three external modes of authentication are supported? (Choose three.)

 
 
 
 
 
 

What is the CLI command to enable SNMPv3 on the Cisco Web Security Appliance?

 
 
 
 

What command alters the SSL ciphers used by the Cisco Email Security Appliance for TLS sessions and HTTPS access?

 
 
 
 

A network administrator is creating an ASA-CX administrative user account with the following parameters:
– The user will be responsible for configuring security policies on network devices.
– The user needs read-write access to policies.
– The account has no more rights than necessary for the job.
What role will the administrator assign to the user?

 
 
 
 
 

If the Cisco ASA 1000V has too few licenses, what is its behavior?

 
 
 
 

What are three features of the Cisco ASA 1000V? (Choose three.)

 
 
 
 
 
 

Which three commands can be used to harden a switch? (Choose three.)

 
 
 
 
 
 

Which three options are hardening techniques for Cisco IOS routers? (Choose three.)

 
 
 
 
 
 

What is the default behavior of NAT control on Cisco ASA Software Version 8.3?

 
 
 
 

What is the default behavior of an access list on the Cisco ASA security appliance?

 
 
 
 

Which threat-detection feature is used to keep track of suspected attackers who create connections to too many hosts or ports?

 
 
 
 

Which command is used to nest objects in a pre-existing group?

 
 
 
 

Which of the following would need to be created to configure an application-layer inspection of SMTP traffic operating on port 2525?

 
 
 
 

A switch is being configured at a new location that uses statically assigned IP addresses. Which will ensure that ARP inspection works as expected?

 
 
 
 

A network printer has a DHCP server service that cannot be disabled. How can a layer 2 switch be configured to prevent the printer from causing network issues?

 
 
 
 

All 30 users on a single floor of a building are complaining about network slowness. After investigating the access switch, the network administrator notices that the MAC address table is full (10,000 entries) and all traffic is being flooded out of every port. Which action can the administrator take to prevent this from occurring?

 
 
 
 
 

Question 1 of 20

 

cart

 

 

 

 

 


Recent Posts


Tags

and/or Remove an End-Device and/or Remove an Infrastructure Device and/or Remove Cables (network and/or power) Cisco 642-997 DCUFI exam Cisco 642-999 DCUCI exam Configure Cisco Unity Connection Configure Cisco Unity Express using the GUI Describe and implement centralized call processing redundancy Describe Data Center Structure and Modularity Describe the Design Methodology Describe the Technologies used within the Data Center Describe WLAN Fundamentals Design and Deploy WLAN Infrastructure for Mobility Design Network Management Considerations into a Data Center Design the Access Layer of a Data Center General Networking Knowledge given a Network Design and a set of Requirements High Availability Routing Features Identify Cisco Equipment and Related Hardware Implement high availability features on Cisco Unified Fabric products in a Cisco Data Center Architecture Implement Multicast over Wireless Implement QoS for Wireless Applications Implement VoWLAN Infrastructure Security Infrastructure Services Install Integrate Client Device Security IP Services LAN Switching Technologies Layer 2 Technologies Layer 3 Technologies Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices Manage the Unified Fabric in a Cisco Data Center Architecture Monitoring and Reporting Tools Network Principles Replace Service-Related Knowledge Threat Defense Threat Defense Architectures Troubleshoot Call Setup Issues Troubleshooting Troubleshoot Registration Issues UCS Compute Troubleshooting VPN Technologies WAN Technologies

Links

Powered by CCNP Exams Test Base