Note:

  • The new CCNP Data Center certification required exams are 300-180 DCIT, 300-165 DCII, 300-160 DCID, 300-175 DCUCI and 300-170 DCVAI exams.
  • The last day to test Cisco 810-403 OUTCOMES exam is December 29, 2017.
  • The last day to test Cisco 820-424 BTASBVA exam is December 29, 2017.

Category Archives: 642-902 ROUTE Exam

05 Dec

cisco certification 642-902 route course

cisco certification 642-902 route course is here for the candidates to prepare the test. The Implementing Cisco IP Routing (ROUTE 642-902) is a qualifying exam for the Cisco Certified Network Professional CCNP, Cisco Certified Internetwork Professional CCIP, and Cisco Certified Design Professional CCDP certifications.

The cisco 642-902 ROUTE exam will certify that the successful candidate has the knowledge and skills necessary to use advanced IP addressing and routing in implementing scalable and secure Cisco ISR routers connected to LANs and WANs.

Below are the details of cisco 642-902 ROUTE exam objectives.

25% 1.0 Implement an EIGRP Based Solution, given a Network Design and a set of Requirements

1.1 Determine network resources needed for implementing EIGRP in a network
1.2 Create an EIGRP implementation plan
1.3 Create an EIGRP verification plan
1.4 Configure EIGRP routing
1.5 Verify EIGRP solution was implemented properly using show and debug commands
1.6 Document the results of EIGRP implementation and verification

25% 2.0 Implement a Multi-Area OSPF Network, given a Network Design and a set of Requirements

2.1 Determine network resources needed for implementing OSPF on a network
2.2 Create an OSPF implementation plan
2.3 Create an OSPF verification plan
2.4 Configure OSPF routing
2.5 Verify OSPF solution was implemented properly using show and debug commands
2.6 Document results of OSPF implementation and verification plan

cisco certification 642-902 route course online practice here. 

 

 

10 Sep

Cisco CCNP 642-902 ROUTE Questions and Answers

Cisco CCNP 642-902 ROUTE questions and answers are available now, which are helpful in your preparation. Implementing Cisco IP Routing is the full name of 642-902 ROUTE. The Associated Certifications are CCDP and CCNP Routing and Switching. There are 45-55 questions in real 642-902 ROUTE exam, which will take the candidates 120 minutes to complete the test.

Share Cisco CCNP 642-902 ROUTE questions and answers below.

How is authentication handled with OSPFv3?
A. OSPFv3 for IPv6 authentication is supported by SHA-1 authentication.
B. OSPFv3 for IPv6 authentication is supported by MD5 authentication.
C. OSPFv3 for IPv6 authentication is supported by IPv6 IPsec.
D. OSPFv3 for IPv6 authentication is supported by IPv4 IPsec.
Answer: C

Using the rules for IPv6 addressing, how can the address 2031:0000:240F:0000:0000:09C0:123A:121B be rewritten?
A. 2031:0:240F::09C0:123A:121B
B. 2031::240F::09C0:123A:121B
C. 2031::240F:9C0::123A:121B
D. 2031::240F:::09C0:123A:121B
Answer: A

Cisco CCNP 642-902 ROUTE questions and answers, 642-902 ROUTE practice test, 642-902 ROUTE exam dump

What two situations could require the use of multiple routing protocols? (Choose two)
A. when using UNIX host-based routers
B. when smaller broadcast domains are desired
C. because having multiple routing protocols confuses hackers
D. when migrating from an older Interior Gateway Protocol (IGP) to a new IGP
E. when all equipment is manufactured by Cisco
F. when there are multiple paths to destination networks
Answer: AD

During BGP configuration on a router that has peered with other BGP speakers, the BGP command aggregate-address 172.32.0.0 255.255.252.0 is issued. However, the peers do not receive this aggregate network in BGP advertisements. Also, the router does not have this aggregate network in its BGP table. Which option indicates a possible reason this command did not cause the router to advertise the aggregate network to its peers?
A. Interface NULL 0 is likely shutdown.
B. The BGP command no synchronization is missing.
C. The BGP command no auto-summary is missing.
D. Subnets of 172.32.0.0/22 do not exist in the BGP table.
E. The IGP running on this router does not have network 172.32.0.0/22 installed.
F. The next hop IP address must be a loopback address.
Answer: D

Besides, candidates can practice more Cisco 642-902 ROUTE questions and answers here.

03 Sep

Paths of Getting CCNP Routing and Switching Certified

Cisco Certified Network Professional (CCNP) Routing and Switching certification validates the ability to plan, implement, verify and troubleshoot local and wide-area enterprise networks and work collaboratively with specialists on advanced security, voice, wireless and video solutions. The CCNP Routing and Switching certification is appropriate for those with at least one year of networking experience who are ready to advance their skills and work independently on complex network solutions.

Those who achieve CCNP Routing and Switching have demonstrated the skills required in enterprise roles such as network engineer, support engineer, systems engineer or network technician. The routing and switching protocol knowledge from this certification will provide a lasting foundation as these skills are equally relevant in the physical networks of today and the virtualized network functions of tomorrow.

In the CCNP Routing and Switching program, you will cover:

Implementing secure, IPv6-enabled LAN and WAN routing solutions to support today’s business-critical services and widespread adoption of BYOD across the enterprise
High availability, switch virtualization and scalable VPN technologies needed to support branch offices and to enable the mobile workforce

Two Paths to Certification
Option 1
If you are currently pursuing your CCNP Routing and Switching certification, you may choose to complete the v1.0 curriculum. Upon completion, the certification will be good for three years. The last day to test is January 29, 2015.
642-902 ROUTE
642-813 SWITCH
642-832 TSHOOT

Option 2
If you have not yet started pursuing the CCNP Routing and Switching certification or if you have only taken one of the three v1.0 exams, we recommend that you pursue the v2.0 certification.
300-101 ROUTE
300-115 SWITCH
300-135 TSHOOT

 

05 Aug

642-902 ROUTE Online Test-Implementing cisco ip routing

Currently, our 642-902 ROUTE online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

During BGP configuration on a router that has peered with other BGP speakers, the BGP command aggregate-address 172.32.0.0 255.255.252.0 is issued. However, the peers do not receive this aggregate network in BGP advertisements. Also, the router does not have this aggregate network in its BGP table. Which option indicates a possible reason this command did not cause the router to advertise the aggregate network to its peers?

 
 
 
 
 
 

What two situations could require the use of multiple routing protocols? (Choose two)

 
 
 
 
 
 

Using the rules for IPv6 addressing, how can the address 2031:0000:240F:0000:0000:09C0:123A:121B be rewritten?

 
 
 
 

How is authentication handled with OSPFv3?

 
 
 
 

A router has two paths to reach another network in a different autonomous system. Neither route was generated by the local router and both routes have the same default weight and local preference values. Which statement is true about how BGP would select the best path?

 
 
 
 

What is the difference between the IPv6 addresses ::/0 and ::/128?

 
 
 
 
 
 

What are two rules for compacting IPv6 addresses? (Choose two.)

 
 
 
 
 
 

What are the two reasons for the appearance of 0.0.0.0 as the next hop for a network in the show ip bgp command output? (Choose two.)

 
 
 
 
 

Which three restrictions apply to OSPF stub areas? (Choose three.)

 
 
 
 
 
 

Into which two types of areas would an area border router (ABR) inject a default route.? (Choose two.)

 
 
 
 
 
 

Question 1 of 10

 

cart

 

 

 

 

 

 

 

04 Aug

300-101 ROUTE Implementing Cisco IP Routing

Implementing Cisco IP Routing (ROUTE 300-101) is a qualifying exam for the Cisco CCNP Routing and Switching and CCDP certifications. The ROUTE 300-101 exam certifies the routing knowledge and skills of successful candidates. They are certified in using advanced IP addressing and routing in implementing scalable and highly secure Cisco routers that are connected to LANs, WANs, and IPv6.

Implementing Cisco IP Routing is the full name of 300-101 ROUTE. There are 45-65 questions in real Cisco 300-101 ROUTE exam, which will take the candidates 120 minutes to complete the test. The available language is English. Candidates can register Cisco 300-101 ROUTE exam at Pearson VUE testing center.

Cisco 300-101 ROUTE exam objectives are as follows.

10% 1.0 Network Principles

1.1 Identify Cisco Express Forwarding concepts
1.1.a FIB
1.1.b Adjacency table

1.2 Explain general network challenges
1.2.a Unicast
1.2.b Out-of-order packets
1.2.c Asymmetric routing

1.3 Describe IP operations
1.3.a ICMP Unreachable and Redirects
1.3.b IPv4 and IPv6 fragmentation
1.3.c TTL

1.4 Explain TCP operations
1.4.a IPv4 and IPv6 (P)MTU
1.4.b MSS
1.4.c Latency
1.4.d Windowing
1.4.e Bandwidth-delay product
1.4.f Global synchronization

1.5 Describe UDP operations
1.5.a Starvation
1.5.b Latency

1.6 Recognize proposed changes to the network
1.6.a Changes to routing protocol parameters
1.6.b Migrate parts of the network to IPv6
1.6.c Routing protocol migration

10% 2.0 Layer 2 Technologies

2.1 Configure and verify PPP
2.1.a Authentication (PAP, CHAP)
2.1.b PPPoE (client side only)

2.2 Explain Frame Relay
2.2.a Operations
2.2.b Point-to-point
2.3.c Multipoint

40% 3.0 Layer 3 Technologies

3.1 Identify, configure, and verify IPv4 addressing and subnetting
3.1.a Address types (Unicast, broadcast, multicast, and VLSM)
3.1.b ARP
3.1.c DHCP relay and server
3.1.d DHCP protocol operations

3.2 Identify IPv6 addressing and subnetting
3.2.a Unicast
3.2.b EUI-64
3.2.c ND, RS/RA
3.2.d Autoconfig (SLAAC)
3.2.e DHCP relay and server
3.2.f DHCP protocol operations

3.3 Configure and verify static routing
3.4 Configure and verify default routing
3.5 Evaluate routing protocol types
3.5.a Distance vector
3.5.b Link state
3.5.c Path vector

3.6 Describe administrative distance
3.7 Troubleshoot passive interfaces
3.8 Configure and verify VRF lite
3.9 Configure and verify filtering with any protocol
3.10 Configure and verify redistribution between any routing protocols or routing sources
3.11 Configure and verify manual and autosummarization with any routing protocol
3.12 Configure and verify policy-based routing
3.13 dentify suboptimal routing
3.14 Explain ROUTE maps
3.15 Configure and verify loop prevention mechanisms
3.15.a Route tagging and filtering
3.15.b Split-horizon
3.15.c Route poisoning

3.16 Configure and verify RIPv2
3.17 Describe RIPng
3.18 Describe EIGRP packet types
3.19 Configure and verify EIGRP neighbor relationship and authentication
3.20 Configure and verify EIGRP stubs
3.21 Configure and verify EIGRP load balancing
3.21.a Equal cost
3.21.b Unequal cost

3.22 Describe and optimize EIGRP metrics
3.23 Configure and verify EIGRP for IPv6
3.24 Describe OSPF packet types
3.25 Configure and verify OSPF neighbor relationship and authentication
3.26 Configure and verify network types, area types, and router types
3.26.a Point-to-point, multipoint, broadcast, nonbroadcast
3.26.b LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
3.26.c Internal router, backbone router, ABR, ASBR
3.26.d Virtual link

3.27 Configure and verify OSPF path preference
3.28 Configure and verify OSPF operations
3.29 Configure and verify OSPF for IPv6
3.30 Describe, configure, and verify BGP peer relationships and authentication
3.30.a Peer group
3.30.b Active, passive
3.30.c States and timers

3.31 3.31 Configure and verify eBGP (IPv4 and IPv6 address families)
3.31.a 3.31.a eBGP
3.31.b 3.31.b 4-byte AS number/p>
3.31.c 3.31.c Private AS

3.32 Explain BGP attributes and best-path selection

10% 4.0 VPN Technologies

4.1 Configure and verify GRE
4.2 Describe DMVPN (single hub)
4.3 Describe Easy Virtual Networking (EVN)

10% 5.0 Infrastructure Security

5.1 Describe IOS AAA using local database

5.2 Describe device security using IOS AAA with TACACS+ and RADIUS
5.2.a AA with TACACS+ and RADIUS
5.2.b Local privilege authorization fallback

5.3 Configure and verify device access control
5.3.a Lines (VTY, AUX, console)
5.3.b Management plane protection
5.3.c Password encryption

5.4 Configure and verify router security features
5.4.a IPv4 access control lists (standard, extended, time-based)
5.4.b IPv6 traffic filter
5.4.c Unicast reverse path forwarding

20% 6.0 Infrastructure Services

6.1 Configure and verify device management
6.1.a Console and VTY
6.1.b Telnet, HTTP, HTTPS, SSH, SCP
6.1.c (T)FTP

6.2 Configure and verify SNMP
6.2.a V2
6.2.b V3

6.3 Configure and verify logging
6.3.a Local logging, syslog, debugs, conditional debugs
6.3.b Timestamps

6.4 Configure and verify Network Time Protocol (NTP)
6.4.a NTP master, client, version 3, version 4
6.4.b NTP authentication

6.5 Configure and verify IPv4 and IPv6 DHCP
6.5.a DHCP client, IOS DHCP server, DHCP relay
6.5.b DHCP options (describe)

6.6 Configure and verify IPv4 Network Address Translation (NAT)
6.6.a Static NAT, dynamic NAT, PAT

6.7 Describe IPv6 NAT
6.7.a NAT64
6.7.b NPTv6

6.8 Describe SLA architecture

6.9 Configure and verify IP SLA
6.9.a ICMP

6.10 Configure and verify tracking objects
6.10.a Tracking objects
6.10.b Tracking different entities (for example, interfaces, IPSLA results)

6.11 Configure and verify Cisco NetFlow
6.11.a NetFlow v5, v9
6.11.b Local retrieval
6.11.c Export (configuration only)

Exam Note: 300-101 ROUTE is new exam instead of 642-902 ROUTE, which begins January 30, 2015.

Related resource: http://www.cisco.com/web/learning/exams/list/route2.html#~Topics

04 Aug

642-902 ROUTE Implementing Cisco IP Routing

The Implementing Cisco IP Routing (ROUTE 642-902) is a qualifying exam for the Cisco Certified Network Professional CCNP, Cisco Certified Internetwork Professional CCIP, and Cisco Certified Design Professional CCDP certifications. The exam will certify that the successful candidate has the knowledge and skills necessary to use advanced IP addressing and routing in implementing scalable and secure Cisco ISR routers connected to LANs and WANs.

Implementing Cisco IP Routing is the full name of 642-902 ROUTE. The Associated Certifications are CCDP and CCNP Routing and Switching. There are 45-55 questions in real 642-902 ROUTE exam, which will take the candidates 120 minutes to complete the test. The available languages are English and japanese. Candidates can register 642-902 ROUTE exam at Pearson VUE testing center.

It is also important for the candidates to know 642-902 ROUTE exam topics before taking the test.
25% 1.0 Implement an EIGRP Based Solution, given a Network Design and a set of Requirements
1.1 Determine network resources needed for implementing EIGRP in a network
1.2 Create an EIGRP implementation plan
1.3 Create an EIGRP verification plan
1.4 Configure EIGRP routing
1.5 Verify EIGRP solution was implemented properly using show and debug commands
1.6 Document the results of EIGRP implementation and verification

25% 2.0 Implement a Multi-Area OSPF Network, given a Network Design and a set of Requirements

2.1 Determine network resources needed for implementing OSPF on a network
2.2 Create an OSPF implementation plan
2.3 Create an OSPF verification plan
2.4 Configure OSPF routing
2.5 Verify OSPF solution was implemented properly using show and debug commands
2.6 Document results of OSPF implementation and verification plan

5% 3.0 Implement an eBGP Based Solution, given a Network Design and a set of Requirements

3.1 Determine network resources needed for implementing eBGP on a network
3.2 Create an eBGP implementation plan
3.3 Create an eBGP verification plan
3.4 Configure eBGP routing
3.5 Verify eBGP solution was implemented properly using show and debug commands
3.6 Document results of eBGP implementation and verification plan

15% 4.0 Implement an IPv6 Based Solution, given a Network Design and a set of Requirements

4.1 Determine network resources needed for implementing IPv6 on a network
4.2 Create an IPv6 implementation plan
4.3 Create an IPv6 verification plan
4.4 Configure IPv6 routing
4.5 Configure IPv6 interoperation with IPv4
4.6 Verify IPv6 solution was implemented properly using show and debug commands
4.7 Document results of IPv6 implementation and verification plan

15% 5.0 Implement an IPv4 or IPv6 Based Redistribution Solution, given a Network Design and a set of Requirements

5.1 Create a redistribution implementation plan based upon the results from a redistribution analysis
5.2 Create a redistribution verification plan
5.3 Configure a redistribution solution
5.4 Verify that a redistribution was implemented
5.5 Document results of a redistribution implementation and verification plan
5.6 Identify the differences between implementing an IPv4 and IPv6 redistribution solution

10% 6.0 Implement Layer 3 Path Control Solution

6.1 Create a Layer 3 path control implementation plan based upon the results of the redistribution analysis
6.2 Create a Layer 3 path control verification pla
6.3 Configure Layer 3 path control
6.4 Verify that a Layer 3 path control was implemented
6.5 Document results of a Layer 3 path control implementation and verification plan

5% 7.0 Implement Basic Teleworker and Branch Services

7.1 Describe broadband technologies
7.2 Configure basic broadband connections
7.3 Describe basic VPN technologies
7.4 Configure GRE
7.5 Describe branch access technologies

Exam Note: The latest day of 642-902 ROUTE to test is January 29, 2015. The new exam is 300-101 ROUTE, which begins January 30, 2015.

Related resource: http://www.cisco.com/web/learning/exams/list/route.html#~Topics,


Recent Posts


Tags

and/or Remove an End-Device and/or Remove an Infrastructure Device and/or Remove Cables (network and/or power) Cisco 642-997 DCUFI exam Cisco 642-999 DCUCI exam Configure Cisco Unity Connection Configure Cisco Unity Express using the GUI Describe and implement centralized call processing redundancy Describe Data Center Structure and Modularity Describe the Design Methodology Describe the Technologies used within the Data Center Describe WLAN Fundamentals Design and Deploy WLAN Infrastructure for Mobility Design Network Management Considerations into a Data Center Design the Access Layer of a Data Center General Networking Knowledge given a Network Design and a set of Requirements High Availability Routing Features Identify Cisco Equipment and Related Hardware Implement high availability features on Cisco Unified Fabric products in a Cisco Data Center Architecture Implement Multicast over Wireless Implement QoS for Wireless Applications Implement VoWLAN Infrastructure Security Infrastructure Services Install Integrate Client Device Security IP Services LAN Switching Technologies Layer 2 Technologies Layer 3 Technologies Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices Manage the Unified Fabric in a Cisco Data Center Architecture Monitoring and Reporting Tools Network Principles Replace Service-Related Knowledge Threat Defense Threat Defense Architectures Troubleshoot Call Setup Issues Troubleshooting Troubleshoot Registration Issues UCS Compute Troubleshooting VPN Technologies WAN Technologies

Links

Powered by CCNP Exams Test Base