Note:

  • The new CCNP Data Center certification required exams are 300-180 DCIT, 300-165 DCII, 300-160 DCID, 300-175 DCUCI and 300-170 DCVAI exams.
  • The last day to test Cisco 810-403 OUTCOMES exam is December 29, 2017.
  • The last day to test Cisco 820-424 BTASBVA exam is December 29, 2017.
09 Aug

200-105 ICND2 Interconnecting Cisco Networking Devices Part 2

Interconnecting Cisco Networking Devices Part 2 is the exam name of 200-105 ICND2 test. There are 45-55 questions in real Cisco 200-105 ICND2 exam, which will take the candidates 90 minutes to complete the test. The Associated Certification is CCNA Routing & Switching. The available languages are English and Japanese. Candidates can register Cisco 200-105 ICND2 exam at Pearson VUE testing center.

Knowing Cisco 200-105 ICND2 exam topics are valuable in your preparation.

1.0 LAN Switching Technologies 26%

1.1 Configure, verify, and troubleshoot VLANs (normal/extended range) spanning multiple switches
1.1.a Access ports (data and voice)
1.1.b Default VLAN
1.2 Configure, verify, and troubleshoot interswitch connectivity
1.2.a Add and remove VLANs on a trunk
1.2.b DTP and VTP (v1&v2)
1.3 Configure, verify, and troubleshoot STP protocols
1.3.a STP mode (PVST+ and RPVST+)
1.3.b STP root bridge selection
1.4 Configure, verify, and troubleshoot STP-related optional features
1.4.a PortFast
1.4.b BPDU guard
1.5 Configure, verify, and troubleshoot (Layer 2/Layer 3) EtherChannel
1.5.a Static
1.5.b PAGP
1.5.c LACP
1.6 Describe the benefits of switch stacking and chassis aggregation
1.7 Describe common access layer threat mitigation techniques
1.7.a 802.1x
1.7.b DHCP snooping
1.7.c Nondefault native VLAN

2.0 Routing Technologies 29%

2.1 Configure, verify, and troubleshoot Inter-VLAN routing
2.1.a Router on a stick
2.1.b SVI
2.2 Compare and contrast distance vector and link-state routing protocols
2.3 Compare and contrast interior and exterior routing protocols
2.4 Configure, verify, and troubleshoot single area and multiarea OSPFv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
2.5 Configure, verify, and troubleshoot single area and multiarea OSPFv3 for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
2.6 Configure, verify, and troubleshoot EIGRP for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub)
2.7 Configure, verify, and troubleshoot EIGRP for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub)

3.0 WAN Technologies 16%

3.1 Configure and verify PPP and MLPPP on WAN interfaces using local authentication
3.2 Configure, verify, and troubleshoot PPPoE client-side interfaces using local authentication
3.3 Configure, verify, and troubleshoot GRE tunnel connectivity
3.4 Describe WAN topology options
3.4.a Point-to-point
3.4.b Hub and spoke
3.4.c Full mesh
3.4.d Single vs dual-homed
3.5 Describe WAN access connectivity options
3.5.a MPLS
3.5.b MetroEthernet
3.5.c Broadband PPPoE
3.5.d Internet VPN (DMVPN, site-to-site VPN, client VPN)
3.6 Configure and verify single-homed branch connectivity using eBGP IPv4 (limited to peering and route advertisement using Network command only)

4.0 Infrastructure Services 14%

4.1 Configure, verify, and troubleshoot basic HSRP
4.1.a Priority
4.1.b Preemption
4.1.c Version
4.2 Describe the effects of cloud resources on enterprise network architecture
4.2.a Traffic path to internal and external cloud services
4.2.b Virtual services
4.2.c Basic virtual network infrastructure
4.3 Describe basic QoS concepts
4.3.a Marking
4.3.b Device trust
4.3.c Prioritization
4.3.c. [i] Voice
4.3.c. [ii] Video
4.3.c. [iii] Data
4.3.d Shaping
4.3.e Policing
4.3.f Congestion management
4.4 Configure, verify, and troubleshoot IPv4 and IPv6 access list for traffic filtering
4.4.a Standard
4.4.b Extended
4.4.c Named
4.5 Verify ACLs using the APIC-EM Path Trace ACL analysis tool

5.0 Infrastructure Maintenance 15%

5.1 Configure and verify device-monitoring protocols
5.1.a SNMPv2
5.1.b SNMPv3
5.2 Troubleshoot network connectivity issues using ICMP echo-based IP SLA
5.3 Use local SPAN to troubleshoot and resolve problems
5.4 Describe device management using AAA with TACACS+ and RADIUS
5.5 Describe network programmability in enterprise network architecture
5.5.a Function of a controller
5.5.b Separation of control plane and data plane
5.5.c Northbound and southbound APIs
5.6 Troubleshoot basic Layer 3 end-to-end connectivity issues

09 Aug

200-105 ICND2 Online Test-Interconnecting Cisco Networking Devices Part 2

Currently, our 200-105 ICND2 online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

1. Which protocol provides a method of sharing VLAN configuration information between two Cisco switches?

 
 
 
 

2. Each of these four switches has been configured with a hostname, as well as being configured to run RSTP. No other configuration changes have been made. Which three of these show the correct RSTP port roles for the indicated switches and interfaces? (Choose three.)

 
 
 
 
 
 

3. Which three statements are typical characteristics of VLAN arrangements? (Choose three.)

 
 
 
 
 
 

4. Which term describes a spanning-tree network that has all switch ports in either the blocking or fowarding state?

 
 
 
 

5. Which two of these statements regarding RSTP are correct? (Choose two.)

 
 
 
 
 

6. Which port state is introduced by Rapid-PVST?

 
 
 
 

7. At which layer of the OSI model is RSTP used to prevent loops?

 
 
 
 

8. Which three statements about RSTP are true? (Choose three.)

 
 
 
 
 
 

9. Which three of these statements regarding 802.1Q trunking are correct? (Choose three.)

 
 
 
 
 

10. What are two characteristics of a switch that is configured as a VTP client? (Choose two.)

 
 
 
 
 
 

Question 1 of 10

 

cart

09 Aug

100-105 ICND1 Interconnecting Cisco Networking Devices Part 1

Interconnecting Cisco Networking Devices Part 1 is the full name of 100-105 ICND1 test. There are 45-55 questions in real Cisco 100-105 ICND1 exam, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. The Associated Certifications are CCENT, CCNA Routing & Switching, CCDA, CCNA Security, CCNA Wireless. Candidates can register Cisco 100-105 ICND1 exam at Pearson VUE testing center.

It is useful for the candidates to know 100-105 ICND1 Interconnecting Cisco Networking Devices Part 1 exam topics.

1.0 Network Fundamentals 20%

1.1 Compare and contrast OSI and TCP/IP models
1.2 Compare and contrast TCP and UDP protocols
1.3 Describe the impact of infrastructure components in an enterprise network
1.3.a Firewalls
1.3.b Access points
1.3.c Wireless controllers
1.4 Compare and contrast collapsed core and three-tier architectures
1.5 Compare and contrast network topologies
1.5.a Star
1.5.b Mesh
1.5.c Hybrid
1.6 Select the appropriate cabling type based on implementation requirements
1.7 Apply troubleshooting methodologies to resolve problems
1.7.a Perform fault isolation and document
1.7.b Resolve or escalate
1.7.c Verify and monitor resolution
1.8 Configure, verify, and troubleshoot IPv4 addressing and subnetting
1.9 Compare and contrast IPv4 address types
1.9.a Unicast
1.9.b Broadcast
1.9.c Multicast
1.10 Describe the need for private IPv4 addressing
1.11 Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment
1.12 Configure, verify, and troubleshoot IPv6 addressing
1.13 Configure and verify IPv6 Stateless Address Auto Configuration
1.14 Compare and contrast IPv6 address types
1.14.a Global unicast
1.14.b Unique local
1.14.c Link local
1.14.d Multicast
1.14.e Modified EUI 64
1.14.f Autoconfiguration
1.14.g Anycast

2.0 LAN Switching Fundamentals 26%

2.1 Describe and verify switching concepts
2.1.a MAC learning and aging
2.1.b Frame switching
2.1.c Frame flooding
2.1.d MAC address table
2.2 Interpret Ethernet frame format
2.3 Troubleshoot interface and cable issues (collisions, errors, duplex, speed)
2.4 Configure, verify, and troubleshoot VLANs (normal range) spanning multiple switches
2.4.a Access ports (data and voice)
2.4.b Default VLAN
2.5 Configure, verify, and troubleshoot interswitch connectivity
2.5.a Trunk ports
2.5.b 802.1Q
2.5.c Native VLAN
2.6 Configure and verify Layer 2 protocols
2.6.a Cisco Discovery Protocol
2.6.b LLDP
2.7 Configure, verify, and troubleshoot port security
2.7.a Static
2.7.b Dynamic
2.7.c Sticky
2.7.d Max MAC addresses
2.7.e Violation actions
2.7.f Err-disable recovery

3.0 Routing Fundamentals 25%

3.1 Describe the routing concepts
3.1.a Packet handling along the path through a network
3.1.b Forwarding decision based on route lookup
3.1.c Frame rewrite
3.2 Interpret the components of routing table
3.2.a Prefix
3.2.b Network mask
3.2.c Next hop
3.2.d Routing protocol code
3.2.e Administrative distance
3.2.f Metric
3.2.g Gateway of last resort
3.3 Describe how a routing table is populated by different routing information sources
3.3.a Admin distance
3.4 Configure, verify, and troubleshoot inter-VLAN routing
3.4.a Router on a stick
3.5 Compare and contrast static routing and dynamic routing
3.6 Configure, verify, and troubleshoot IPv4 and IPv6 static routing
3.6.a Default route
3.6.b Network route
3.6.c Host route
3.6.d Floating static
3.7 Configure, verify, and troubleshoot RIPv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution)

4.0 Infrastructure Services 15%

4.1 Describe DNS lookup operation
4.2 Troubleshoot client connectivity issues involving DNS
4.3 Configure and verify DHCP on a router (excluding static reservations)
4.3.a Server
4.3.b Relay
4.3.c Client
4.3.d TFTP, DNS, and gateway options
4.4 Troubleshoot client- and router-based DHCP connectivity issues
4.5 Configure and verify NTP operating in client/server mode
4.6 Configure, verify, and troubleshoot IPv4 standard numbered and named access list for routed interfaces
4.7 Configure, verify, and troubleshoot inside source NAT
4.7.a Static
4.7.b Pool
4.7.c PAT

5.0 Infrastructure Maintenance 14%

5.1 Configure and verify device-monitoring using syslog
5.2 Configure and verify device management
5.2.a Backup and restore device configuration
5.2.b Using Cisco Discovery Protocol and LLDP for device discovery
5.2.c Licensing
5.2.d Logging
5.2.e Timezone
5.2.f Loopback
5.3 Configure and verify initial device configuration
5.4 Configure, verify, and troubleshoot basic device hardening
5.4.a Local authentication
5.4.b Secure password
5.4.c Access to device
5.4.c. [i] Source address
5.4.c. [ii] Telnet/SSH
5.4.d Login banner
5.5 Perform device maintenance
5.5.a Cisco IOS upgrades and recovery (SCP, FTP, TFTP, and MD5 verify)
5.5.b Password recovery and configuration register
5.5.c File system management
5.6 Use Cisco IOS tools to troubleshoot and resolve problems
5.6.a Ping and traceroute with extended option
5.6.b Terminal monitor
5.6.c Log events

09 Aug

100-105 ICND1 Online Test-Interconnecting Cisco Networking Devices Part 1

Currently, our 100-105 ICND1 online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

Please go to 100-105 ICND1 Online Test-Interconnecting Cisco Networking Devices Part 1 to view the test

 

cart


Recent Posts


Tags

and/or Remove an End-Device and/or Remove an Infrastructure Device and/or Remove Cables (network and/or power) Cisco 642-997 DCUFI exam Cisco 642-999 DCUCI exam Configure Cisco Unity Connection Configure Cisco Unity Express using the GUI Describe and implement centralized call processing redundancy Describe Data Center Structure and Modularity Describe the Design Methodology Describe the Technologies used within the Data Center Describe WLAN Fundamentals Design and Deploy WLAN Infrastructure for Mobility Design Network Management Considerations into a Data Center Design the Access Layer of a Data Center General Networking Knowledge given a Network Design and a set of Requirements High Availability Routing Features Identify Cisco Equipment and Related Hardware Implement high availability features on Cisco Unified Fabric products in a Cisco Data Center Architecture Implement Multicast over Wireless Implement QoS for Wireless Applications Implement VoWLAN Infrastructure Security Infrastructure Services Install Integrate Client Device Security IP Services LAN Switching Technologies Layer 2 Technologies Layer 3 Technologies Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices Manage the Unified Fabric in a Cisco Data Center Architecture Monitoring and Reporting Tools Network Principles Replace Service-Related Knowledge Threat Defense Threat Defense Architectures Troubleshoot Call Setup Issues Troubleshooting Troubleshoot Registration Issues UCS Compute Troubleshooting VPN Technologies WAN Technologies

Links

Powered by CCNP Exams Test Base