Note:

  • The new CCNP Data Center certification required exams are 300-180 DCIT, 300-165 DCII, 300-160 DCID, 300-175 DCUCI and 300-170 DCVAI exams.
  • The last day to test Cisco 810-403 OUTCOMES exam is December 29, 2017.
  • The last day to test Cisco 820-424 BTASBVA exam is December 29, 2017.
18 Apr

300-360 WIDESIGN Designing Cisco Wireless Enterprise Networks

Designing Cisco Wireless Enterprise Networks is the exam name of 300-360 WIDESIGN test. There are 60-70 questions in real Cisco 300-360 WIDESIGN exam, which will take the candidates 90 minutes to complete the test. The Associated Certification is CCNP Wireless. The available language is English. Candidates can register Cisco 300-360 WIDESIGN exam at Pearson VUE testing center.

It is also valuable for the candidates to know Cisco 300-360 WIDESIGN exam topics.

1.0 Obtaining Customer Requirements as Related to the WLAN Installation 12%

1.1 Identify business and RF application needs
1.2 Identify client density, capabilities and their impact on the wireless network
1.2.a Client quantity, radio type, spatial streams
1.3 Identify the challenges of setting up a wireless network by various vertical markets
1.4 Describe required site survey documentation
1.4.a Customer questionnaire
1.4.b Floor plans & their quality
1.4.c Describe the deliverables of the site survey
1.5 Identify coverage area requirements
1.5.a Mesh
1.5.b High density
1.5.c Security sensitive
1.5.d Real time applications

2.0 Determine Facility Type and Constraints Related to WLAN Deployments 12%

2.1 Describe impact of regulatory domains
2.1.a Mesh
2.1.b Channel and power
2.1.c Multi-national deployments
2.2 Identify deployment location safety considerations
2.3 Identify the impact of customer aesthetic limitations on the installation
2.4 Assess the existing wired and wireless infrastructure
2.4.a Determine high-throughput and very high throughput (VHT) protocol (n/ac) impact
2.4.b Determine existing wireless infrastructure if required
2.5 Identify impact of material attenuation
2.5.a Walls, cubicles, and the likes
2.5.b Single/multi-floor
2.5.c Campus
2.5.d Warehouse/retail
2.5.e Subtitle number 2.2

3.0 WLAN Predictive Design 14%

3.1 Select the criteria used for coverage design
3.1.a Data vs voice vs video vs location
3.2 Demonstrate the impact of frequency planning in a high density environment
3.2.a Band select for high density
3.2.b Optimize 2.4 GHz radio utilization
3.2.c Legacy devices
3.2.d Channel width
3.3 Use PI and Ekahau planning tools to make network plan
3.3.a Enter network requirements in the tool
3.3.a.[i] Capacity requirements
3.3.a.[ii] Coverage requirements
3.3.b Define the environment
3.3.b.[i] Maps and scale
3.3.b.[ii] Types of RF obstacles
3.3.c Place and configure simulated APs and antennas
3.3.c.[i] Place simulated APs (manual, automatics)
3.3.c.[ii] Adjust APs and Antennas / AP TX power height and down tilt
3.3.d Analyze key network metrics using heat maps for 2.4 and 5GHz
3.3.d.[i] Analyze coverage, SNR, and channel overlap
3.3.d.[ii] Analyze AP placements in regards to real time handoffs around corner

4.0 Pre-Deployment Site Survey 14%

4.1 Identify the appropriate site survey equipment and access requirements based on environmental needs
4.2 Complete the Layer 2 site survey for indoor, and outdoor MESH environments
4.2.a Select proper AP and antenna for conducting site survey
4.2.b Configure AP
4.2.c Survey for worst case client
4.3 Complete Layer 1 survey (Cisco CleanAir, Metageek Chanalyzer)

5.0 Post-Deployment Site Survey 15%

5.1 Verify RF coverage
5.1.a Utilize tools (Ekahau) for audit
5.1.b RRM, controller
5.1.c Analyze SNR, channel overlap, and packet loss
5.2 Verify network applications and performance
5.2.a Apply PI tools (voice readiness, location readiness, site calibration)
5.3 Reconcile any deployment issues
5.4 Assemble and deliver installation report to customer
5.4.a Indoor
5.4.b Outdoor MESH

6.0 Design the Infrastructure of the Wireless Network 15%

6.1 Determine physical infrastructure requirements
6.1.a AC Power and POE
6.1.b Understand cable plant considerations
6.1.c Mounting considerations: NEMA
6.1.d Outdoor grounding and lighting protection
6.1.e Rack capacity
6.1.f Switch port capacity
6.2 Determine logical infrastructure requirements
6.2.a Determine AP count, controller count, and license requirements
6.2.b Decide the type of architecture for the deployment
6.3 Describe IPv6 optimization on the WLC
6.3.a RA filter
6.3.b DHCP Server guard
6.3.c DHCPv6 Source guard

7.0 Describe and Design Wireless Architecture for Real time Applications 18%

7.1 Describe the relationship between real time applications & the wireless networks
7.1.a Packet Error Rate (PER)
7.1.b RF Coverage
7.1.c Bit Error Rate (BER)
7.1.d QoS
7.1.e Call Admission Control (CAC)
7.1.f Client roaming decision algorithm
7.2 Describe voice and video as they apply to the wireless network
7.2.a Device capabilities (hardware and software)
7.2.b Call setup/data flow overview
7.2.c Other wireless voice and video services (i.e. Jabber, Lync, Skype, Viber, Facetime)
7.2.d Standards and WIFI Alliance (WFA) certifications (.11r, .11e, .11n/ac, .11k, CCKM, voice enterprise, voice personal, WMM, UAPSD)
7.2.e Cisco Compatible Extensions (voice features)
7.2.f Voice and video codecs
7.2.g Skinny Client Control Protocol (SCCP)
7.2.h Session Initiation Protocol (SIP)
7.3 Describe real time applications (other than voice and video) as they apply to the wireless network
7.3.a Session based and non-session based
7.3.b Roaming sensitivity
7.3.c Disconnection issue
7.4 Design wireless roaming parameters for supporting real time applications
7.4.a 802.11 r/k, CCKM, OKC, mobility groups, interface groups,
7.4.b Tuning RF parameters
7.4.c AP placement considerations
7.5 Design wireless parameters for supporting real time applications
7.5.a Minimum speed requirements-RSSI and SNR
7.5.b Client transmit and receive sensitivity / mismatch with AP
7.5.c Cell overlap requirements
7.5.d Cell separations
7.5.e Traffic control and management, QoS, VLAN, WMM, AVC
7.5.f Delay and jitter requirements
7.5.g CAC and TSPEC
7.5.h Spectrum
7.5.i 802.11n/ac enhancements
7.5.j Concurrent client connections
7.5.k Band select

10 Apr

810-403 Online Test-Selling Business Outcomes

Currently, our 810-403 online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

How does an open plan volume licensing model work?

 
 
 
 

Which option is a benefit of using the power/influence grid to manage stakeholders?

 
 
 
 

Which solution enables business outcomes in the healthcare industry?

 
 
 
 

Which two options are benefits of effective communication with stakeholders? (Choose two)

 
 
 
 

Which option us a direct financial benefit from business outcomes?

 
 
 
 

Which are two purposes of the Cisco enablement resources and Cisco Playbooks when articulating the business value to customers? (Choose two.)

 
 
 
 
 

Wihch option is the main benefit of the Internet of Everything?

 
 
 
 

Which two considerations must you take into account when communicating the business outcomes story? (Choose tow.)

 
 
 
 

How does an open plan volume licensing model work?

 
 
 
 

Which option is a benefit of using the power/influence gnd to manage stakeholder?

 
 
 
 

Question 1 of 10

cart


Recent Posts


Tags

and/or Remove an End-Device and/or Remove an Infrastructure Device and/or Remove Cables (network and/or power) Cisco 642-997 DCUFI exam Cisco 642-999 DCUCI exam Configure Cisco Unity Connection Configure Cisco Unity Express using the GUI Describe and implement centralized call processing redundancy Describe Data Center Structure and Modularity Describe the Design Methodology Describe the Technologies used within the Data Center Describe WLAN Fundamentals Design and Deploy WLAN Infrastructure for Mobility Design Network Management Considerations into a Data Center Design the Access Layer of a Data Center General Networking Knowledge given a Network Design and a set of Requirements High Availability Routing Features Identify Cisco Equipment and Related Hardware Implement high availability features on Cisco Unified Fabric products in a Cisco Data Center Architecture Implement Multicast over Wireless Implement QoS for Wireless Applications Implement VoWLAN Infrastructure Security Infrastructure Services Install Integrate Client Device Security IP Services LAN Switching Technologies Layer 2 Technologies Layer 3 Technologies Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices Manage the Unified Fabric in a Cisco Data Center Architecture Monitoring and Reporting Tools Network Principles Replace Service-Related Knowledge Threat Defense Threat Defense Architectures Troubleshoot Call Setup Issues Troubleshooting Troubleshoot Registration Issues UCS Compute Troubleshooting VPN Technologies WAN Technologies

Links

Powered by CCNP Exams Test Base