Note:

  • The new CCNP Data Center certification required exams are 300-180 DCIT, 300-165 DCII, 300-160 DCID, 300-175 DCUCI and 300-170 DCVAI exams.
  • The last day to test Cisco 810-403 OUTCOMES exam is December 29, 2017.
  • The last day to test Cisco 820-424 BTASBVA exam is December 29, 2017.
30 Oct

200-355 WIFUND Implementing Cisco Wireless Networking Fundamentals

200-355 WIFUND is known as Implementing Cisco Wireless Networking Fundamentals, which is a required one for CCNA Wireless certification. There are 60-70 questions in real Cisco 200-355 exam, which will take the candidates 90 minutes to complete the test. The available language is English. Candidates can register Cisco 200-355 WIFUND exam at Pearson VUE testing center.

Cisco 200-355 WIFUND exam tests a candidate’s knowledge of Radio Frequency (RF) and 802.11 technology essentials along with installing, configuring, monitoring and basic troubleshooting tasks needed to support Small Medium Business and Enterprise wireless networks. It is helpful for the candidates to know Cisco 200-355 WIFUND exam topics.

1.0 RF Fundamentals 13%

1.1 Describe the propagation of radio waves
1.1.a Frequency, amplitude, phase, wavelength (characteristics)
1.1.b Absorption, reflection, diffraction, scattering, refraction, fading, free space path loss, multipath
1.2 Interpret RF signal measurements
1.2.a Signal strength (RSSI, Transmit power, receive sensitivity)
1.2.b Differentiate interference vs. noise
1.2.c Device capabilities (smartphones, laptops, tablets)
1.2.d Define SNR
1.3 Explain the principles of RF mathematics
1.3.a Compute dBm, mW, Law of 3s and 10s,
1.4 Describe Wi-Fi antenna characteristics
1.4.a Ability to read a radiation pattern chart
1.4.b Antenna types and uses
1.4.c dBi, dBd, EIRP

2.0 802.11 Technology Fundamentals 13%

2.1 Describe basic Wi-Fi governance
2.1.a Describe regional regulatory bodies (such as, FCC / ETSI/ NTT)
2.1.b IEEE 802.11
2.1.c Wi-Fi Alliance
2.2 Describe usable channel and power combination
2.2.a Regional EIRP limitation examples
2.2.b ISM, UNII frequency bands
2.2.c Describe RRM fundamental(s)
2.3 Describe 802.11 fundamentals
2.3.a Modulation techniques
2.3.b Channel width
2.3.c MIMO / MU-MIMO
2.3.c (i) MRC
2.3.c (ii) Beam forming
2.3.c (iii) Spatial streams
2.3.d Wireless topologies
2.3.d (i) IBSS
2.3.d (ii) BSS
2.3.d (iii) ESS
2.3.e Frame types
2.3.e (i) Management
2.3.e (ii) Control
2.3.e (iii) Data

3.0 Implementing a Wireless Network 16%

3.1 Describe the various Cisco wireless architectures
3.1.a Cloud
3.1.b Autonomous
3.1.c Split MAC
3.1.c (i) FlexConnect
3.1.c (ii) Centralized
3.1.c (iii) Converged
3.2 Describe physical infrastructure connections
3.2.a Wired infrastructures (AP, WLC, access/trunk ports, LAG)
3.3 Describe AP and WLC management access connections
3.3.a Management connections (Telnet, SSH, HTTP, HTTPS, console)
3.3.b IP addressing: IPv4 / IPv6
3.3.c Management via wireless

4.0 Operating a Wireless Network 20%

4.1 Execute initial setup procedures Cisco wireless infrastructures
4.1.a Cloud
4.1.b Converged
4.1.c Centralized
4.1.d Autonomous
4.2 Describe the Cisco implementation of the CAPWAP discovery and join process
4.2.a DHCP
4.2.b DNS
4.2.c Master-controller
4.2.d Primary-secondary-tertiary
4.3 Distinguish different lightweight AP modes
4.4 Describe and configure the components of a wireless LAN access for client connectivity using GUI only
4.5 Identify wireless network and client management and configuration platform options
4.5.a Controller GUI and CLI
4.5.b Prime infrastructure
4.5.c Dashboard
4.5.d ISE
4.6 Maintain wireless network
4.6.a Perform controller configuration backups
4.6.b Perform code updates on controller, APs, and converged access switches
4.6.b (i) AireOS: boot loader (FUS), image
4.6.b (ii) IOS-XE: bundle, unbundle
4.6.b (iii) Autonomous

5.0 Configuration of Client Connectivity 16%

5.1 Identify authentication mechanisms
5.1.a LDAP, RADIUS, local authentication, WebAuth, 802.1X,PSK
5.2 Configuring WLAN authentication mechanisms on the controller
5.2.a WebAuth, 802.1X, PSK
5.2.b TKIP deprecation
5.3 Configure client connectivity in different operating systems
5.3.a Android, MacOS, iOS, Windows
5.4 Describe roaming
5.4.a Layer 2 and Layer 3
5.4.b Intracontroller and intercontroller
5.4.c Centralized mobility
5.4.d Converged mobility
5.5 Describe wireless guest networking
5.5.a Anchor controller
5.5.b Foreign controller

6.0 Performing Client Connectivity Troubleshooting 13%

6.1 Validating WLAN configuration settings at the infrastructure side
6.1.a Security settings
6.1.b SSID settings
6.2 Validating AP infrastructure settings
6.2.a Port level configuration
6.2.b Power source
6.2.c AP and antenna orientation and position
6.3 Validate client settings
6.3.a SSID
6.3.b Security
6.3.c Device driver version
6.4 Employ appropriate controller tools to assist troubleshooting
6.4.a GUI logs
6.4.b CLI show commands
6.4.c Monitor pages
6.4.c (i) CleanAir (controller GUI)
6.2 Identify appropriate third-party tools to assist troubleshooting
6.2.a OS-based Client utilities
6.2.b Wi-Fi scanners
6.2.c RF mapping tool

7.0 Site Survey Process 9%

7.1 Describe site survey methodologies and their purpose
7.1.a Offsite (predictive / plan)
7.1.b Onsite
7.1.b (i) Predeployment (AP on a stick)
7.1.b (ii) Post deployment (validation)
7.2 Describe passive and active site surveys
7.3 Identify proper application of site survey tools
7.3.a Spectrum analyzer
7.3.b Site surveying software
7.4 Describe the requirements of client real-time and non-real-time applications

28 Oct

600-460 UCCEIS Implementing and Supporting Cisco Unified Contact Center Enterprise

Implementing and Supporting Cisco Unified Contact Center Enterprise is the full name of 600-460 exam, which is a hot one of Cisco certification. There are 65-75 questions in real Cisco 600-460 exam, which will take the candidates 75 minutes to complete the test. The Associated Certifications  of Cisco 600-460 exam is Cisco Unified Contact Center Enterprise Specialist. The available language is English. Candidates can register Cisco 600-460 exam at Pearson VUE testing center.

Cisco 600-460 exam tests a candidate’s knowledge of installing and deploying Cisco Unified Contact Center Enterprise (Cisco Unified CCE) solutions. Cisco Unified CCE is part of the Cisco Unified Communications application suite, which delivers intelligent call routing, network-to-desktop computer telephony integration (CTI), and multichannel contact management to contact center agents over an IP network. Knowing Cisco 600-460 exam topics are valuable in your preparation.

14% 1.0 Describe the Fault Tolerant Characteristics of the Cisco Unified Contact Center Enterprise Solution including Cisco Unified Customer Voice Portal, Cisco Unified Intelligence Center, and Cisco Finesse
1.1 Explain the fault-tolerant integration of Cisco Unified Customer Voice Portal in the Cisco Unified CCE solution
1.2 Explain what Cisco Unified ICM router key is
1.3 Describe the steps required for Cisco Finesse configuration updates
1.4 Describe the internal communications between Cisco Unified ICM components
1.5 Describe the requirements for Cisco Unified ICM heartbeats
1.6 Describe the synchronization between Cisco Unified ICM components
1.7 Describe the considerations for upgrading one or more components of the Cisco Unified CCE solution
1.8 Describe the impact of a network failure in the Cisco Unified CCE solution
1.9 Explain how the Cisco (Unified ICM) call routing script can detect and route around failed system components of the Cisco Unified CCE solution

21% 2.0 Describe the Installation Process for ICM Components of the Cisco Unified Contact Center Enterprise Solution including Cisco Unified CVP, Cisco Unified IC, and Cisco Finesse
2.1 Describe the configuration elements for Cisco Unified CVP that is required in Unified ICM
2.2 Describe the install and setup for SIP dialer and voice gateways
2.3 Describe the Cisco Unified Intelligence Center requirements using virtualization environment
2.4 Explain the configuration roles for agent teams
2.5 Describe the install and configuration requirements for Cisco Finesse
2.6 Describe the configuration limits for Packaged CCE
2.7 Describe the configuration requirements for voice gateway used in Packed CCE deployment
2.8 Explain the required configuration to use significant digits
2.9 Explain the required software to install and setup VMware Hypervisor
2.10 Describe the configuration options required to enable the Outbound option in the Cisco Unified ICM
2.11 Describe the role of the Cisco Unified ICM Domain Manager tool
2.12 Describe the Unified ICM routing clients

18% 3.0 Describe the Call Flow Scripting Process in Cisco Unified ICM and Cisco Unified CVP for the Cisco Unified Contact Center Enterprise Solution
3.1 Describe the precision queue scripting consideration
3.2 Describe the Extended Call Context variables with Cisco Unified CVP
3.3 Describe the functionality limitation imposed when you use Cisco Unified CVP MicroApp
3.4 Describe the elements needed to trigger Cisco Unified ICM script
3.5 Describe configuration elements to make VXML gateway part of Cisco Unified CVP deployment
3.6 Describe configuration elements needed for post call survey
3.7 Describe outbound scripting considerations
3.8 Describe the impact that Cisco Unified ICM scripting has on reporting in the Cisco Unified CCE solution
3.9 Describe configuration elements needed for sig digits
3.10 Explain the options available in Cisco Unified ICM call routing scripts to access external databases for call routing
3.11 Describe how MicroApp can capture DTMF

16% 4.0 Understanding Cisco Unified CCE Tools Including Cisco Unified ICM, Cisco Unified CVP, Cisco Unified IC, and Cisco Finesse Tools
4.1 Describe the available tools in the Cisco Unified CCE solution to support Cisco Unified Intelligent Contact Management
4.2 Describe the available tools in the Cisco Unified CCE solution to support the Cisco Unified Communications Manager
4.3 Describe the available tools in the Cisco Unified CCE solution to support the Cisco Unified CVP Customer Response Solutions
4.4 Describe the available tools in the Cisco Unified CCE solution to support Cisco Finesse
4.5 Describe the available tools in the Cisco Unified CCE solution to support the Cisco Unified Intelligence Center

11% 5.0 Identify Cisco Unified ICM, Cisco Unified CVP, and Cisco Finesse
5.1 Identify issues in Cisco Unified CVP log and trace files
5.2 Identify issues in Cisco Unified ICM and CTI log and trace files
5.3 Identify issues in Cisco Unified Enterprise outbound option log and trace files
5.4 Identify issues in Cisco Finesse log and trace files
5.5 Identify issues in Cisco Unified Contact Center Enterprise security

7% 6.0 Understanding Cisco Unified CCE Agent Supervision Issues and Considerations
6.1 Identify Ring No Answer issues and considerations
6.2 Identify Cisco Finesse considerations to avoid agent issues
6.3 Understanding Cisco Finesse Administration to avoid agent issues
6.4 Identify issues with agents not being able to log into Cisco Unified CCE
6.5 Identify issues with agent call behavior

13% 7.0 Understanding Cisco Unified CCE Solution Call Flow Issues and Considerations
7.1 Identify call flow issues and considerations for the Cisco Unified ICM call routing scripts for inbound and outbound calls
7.2 Identify call flow issues for agent transfers in the Cisco Unified CCE solution
7.3 Identify call flow issues and considerations for the Cisco Unified CVP scripts
7.4 Identify Cisco Unified CVP configuration elements and their purpose
7.5 Identify call flow issues and considerations for the VXML gateways
7.6 Identify voice quality issues

 

28 Oct

600-460 UCCEIS Online Test-Implementing and Supporting Cisco Unified Contact Center Enterprise

Currently, our 600-460 UCCEIS online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

In the Cisco Unified Contact Center Enterprise with Cisco Unified CVP, which two statements about how to increase the Cisco Unified CVP availability are true? (Choose two.)

 
 
 
 
 

In the Cisco Contact Center Enterprise solution, which process is responsible for peer-to-peer synchronization?

 
 
 
 

What is the semantic meaning of the RouterCallKeyDay variable?

 
 
 
 
 

Cisco Unified Contact Center Enterprise is deployed with Cisco Finesse and you make changes to CTI Server, Contact Center Enterprise Administration, or cluster settings. Which service must be restarted for changes to take effect?

 
 
 
 
 

Within Cisco Unified ICM, which process handles communication between the router and peripheral gateway components?

 
 
 
 

Which option about the ICM heartbeat interval and maximum number of missed heartbeats allowed between duplexed sides over the private network is true?

 
 
 
 
 

You are about to perform a Tech Refresh upgrade for a customer. The customer wants more details about how the historical data is maintained. The customer has two sides each with a router, logger, and HDS-DDS. Which is the best explanation?

 
 
 
 

When performing an upgrade to Cisco Unified Contact Center Enterprise solution, which components do not need to be upgraded together during the same maintenance window?

 
 
 
 

In the Cisco Unified Contact Center Enterprise solution, if the private network fails but the visible network is still operational, which statement is true?

 
 
 
 

Which two things can cause the “Send to VRU” to fail within an ICM script for Cisco Unified Customer Voice Portal? (Choose two.)

 
 
 
 
 

Question 1 of 10

 

cart

24 Oct

300-320 ARCH Online Test-Designing Cisco Network Service Architectures

Currently, our 300-320 ARCH online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

Please go to 300-320 ARCH Online Test-Designing Cisco Network Service Architectures to view the test

 

cart

24 Oct

300-320 ARCH Designing Cisco Network Service Architectures

Designing Cisco Network Service Architectures is the full name of 300-320 test, which is a required one for CCDP certification. There are 60-70 questions in real Cisco 300-320 ARCH exam, which will take the candidates 75 minutes to complete the test. The available language is English. Candidates can register Cisco 300-320 ARCH exam at Pearson VUE testing center.

Cisco 300-320 ARCH exam tests a candidate’s knowledge of the latest development in network design and technologies, including L2 and L3 infrastructures for the enterprise, WAN technologies, data center integration, network security and network services. It is also important for the candidates to know Cisco 300-320 ARCH exam topics.

1.0 Advanced Addressing and Routing Solutions for Enterprise Networks 22%

1.1 Create structured addressing designs to facilitate summarization
1.1.a Hierarchy
1.1.b Efficiency
1.1.c Scalability
1.1.d NAT
1.2 Create stable, secure, and scalable routing designs for IS-IS
1.3 Create stable, secure, and scalable routing designs for EIGRP
1.4 Create stable, secure, and scalable routing designs for OSPF
1.5 Create stable, secure, and scalable routing designs for BGP
1.5.a Transit prevention
1.5.b Basic route filtering
1.5.c Authentication
1.5.d Communities
1.5.e Basic traffic engineering (load distribution, creating path symmetry)
1.5.f Route reflectors
1.6 Determine IPv6 migration strategies
1.6.a Overlay (tunneling)
1.6.b Native (dual-stacking)
1.6.c Boundaries (IPv4/IPv6 translations)

2.0 Advanced Enterprise Campus Networks 20%

2.1 Design for high availability
2.1.a First Hop Redundancy Protocols
2.1.b Device virtualization
2.2 Design campus Layer 2 infrastructures
2.2.a STP scalability
2.2.b Fast convergence
2.2.c Loop-free technologies
2.3 Design multicampus Layer 3 infrastructures
2.3.a Convergence
2.3.b Load sharing
2.3.c Route summarization
2.3.d Route filtering
2.3.e VRFs
2.3.f Optimal topologies
2.4 Design a network to support network programmability
2.4.a Describe Application Centric Infrastructures (ACI)
2.4.b Select appropriate controller to meet requirements
2.4.c Identify and address key security issues with network programmability

3.0 WANs for Enterprise Networks 17%

3.1 Compare and contrast WAN connectivity options
3.1.a Dynamic Multipoint VPN (DMVPN)
3.1.b Layer 2 VPN
3.1.c MPLS Layer 3 VPN
3.1.d IPsec
3.1.e Generic Routing Encapsulation (GRE)
3.1.f Private lines
3.2 Design site-to-site VPNs
3.2.a DMVPN
3.2.b Layer 2 VPN
3.2.c MPLS Layer 3 VPN
3.2.d IPSec
3.2.e Group Encrypted Transport VPN (GETVPN)
3.3 Design for a resilient WAN strategy
3.3.a Single-homed
3.3.b Multi-homed
3.3.c Backup connectivity
3.3.d Failover
3.4 Design Extranet connectivity
3.4.a VPN
3.4.b Private lines
3.4.c Multitenant segmentation
3.5 Design Internet edge connectivity
3.5.a DMZ
3.5.b NAT
3.5.c Proxy functionality
3.5.d Resiliency
3.5.e Basic traffic engineering techniques (outbound/inbound load distribution, active/failover, symmetric outbound traffic flows)

4.0 Enterprise Data Center Integration 17%

4.1 Describe a modular and scalable data center network
4.1.a Top-of-rack
4.1.b End-of-row
4.1.c Multitenant environments
4.1.d Multitier topologies
4.2 Describe network virtualization technologies for the data center
4.2.a VPC
4.2.b VSS
4.2.c VDCs
4.2.d VRFs
4.2.e Multichassis EtherChannel
4.2.f VXLAN
4.2.g TRILL / Fabric Path
4.3 Describe high availability in a data center network
4.3.a VPC
4.3.b VSS
4.3.c Multichassis EtherChannel
4.4 Design data center interconnectivity
4.4.a OTV
4.4.b Private Line
4.4.c L2 vs. L3
4.4.d VPLS
4.4.e A-VPLS
4.5 Design data center and network integration
4.5.a Traffic flow
4.5.b Bandwidth
4.5.c Security
4.5.d Resiliency

5.0 Security Services 13%

5.1 Design firewall and IPS solutions
5.1.a Modes of operation
5.1.b Clustering
5.1.c High availability techniques
5.1.d IPS functionality and placement
5.1.e Multiple contexts
5.2 Design network access control solutions
5.2.a 802.1x
5.2.b TrustSec
5.2.c EAP
5.2.d Authentication services
5.2.e RBAC
5.2.f Basic denial of service mitigation techniques
5.3 Design infrastructure protection
5.3.a Infra structure ACLs
5.3.b CoPP
5.3.c Layer 2 / Layer 3 security considerations

6.0 Network Services 11%

6.1 Select appropriate QoS strategies to meet customer requirements
6.1.a DiffServ
6.1.b IntServ
6.2 Design end-to-end QoS policies
6.2.a Classification and marking
6.2.b Shaping
6.2.c Policing
6.2.d Queuing
6.3 Describe network management techniques
6.3.a In-band vs. out-of-band
6.3.b Segmented management networks
6.3.c Prioritizing network management traffic
6.4 Describe multicast routing concepts
6.4.a Source trees, shared trees
6.4.b RPF
6.4.c Rendezvous points
6.5 Design multicast services
6.5.a SSM
6.5.b PIM bidirectional
6.5.c MSDP

23 Oct

300-075 CIPTV2 Online Test-Implementing Cisco IP Telephony & Video, Part 2 v1.0

Currently, our 300-075 CIPTV2 online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

Please go to 300-075 CIPTV2 Online Test-Implementing Cisco IP Telephony & Video, Part 2 v1.0 to view the test

 

cart

 

23 Oct

300-075 CIPTV2 Implementing Cisco IP Telephony & Video, Part 2 v1.0

Implementing Cisco IP Telephony & Video, Part 2 v1.0 is the full name of 300-075 test, which is a hot one of CCNP collaboration certification. There are 55-65 questions in real Cisco 300-075 exam, which will take the candidates 75 minutes to complete the test. The Associated Certifications of Cisco 300-075 exam is CCNP Collaboration. The available language is English. Candidates can register Cisco 300-075 exam at Pearson VUE testing center.

Cisco 300-075 exam tests candidates seeking CCNP Collaboration on their ability for implementing a Cisco Unified Collaboration solution in a multisite environment. It is helpful for the candidates to know Cisco 300-075 exam topics.

1.0 VCS Control 17%

1.1 Configure registration of devices
1.2 Explore the fundamentals of subzones
1.3 Describe zone plans for VCS
1.4 Describe and configure traversal zones
1.5 Describe the benefits and configuration of transforms and create call policies
1.6 Explore VCS searches for endpoints
1.7 Integrating LDAP
1.8 Explain DNS and SRV records and document requirements for SRV records
1.9 Describe how clustering and replication works and configure a cluster
1.10 Configure interworking with VCS
1.11 Configure H.323 (including gatekeeper) and SIP
1.12 Configure trunking

2.0 Collaboration Edge (VCS Expressway) 12%

2.1 Identify and configure the requirements when deploying a collaboration edge
2.2 Establish a relationship between C/Expressway E and CUCM
2.3 Document and produce requirements for firewall and NAT configuration
2.4 Describe and implement privacy and security controls for external devices and calls
2.5 Describe elements in a traversal call (H.460 and Assent)

3.0 Configure CUCM Video Service Parameters 9%

3.1 Configure DSCP
3.2 Configuring clusterwide parameters system QoS

4.0 Describe and Implement Centralized Call Processing Redundancy 10%

4.1 Describe device fail over
4.2 Configure call survivability
4.3 Configure Cisco Unified Survivable Remote Site Telephony operation
4.4 Verify redundancy operations

5.0 Describe and Configure a Multi-site Dial Plan for Cisco Unified Communications Manager 17%

5.1 Describe the issues with multi-site dial plans
5.2 Describe the differences between the various gateways and trunk types supported by Cisco Unified Communication Manager
5.3 Implement trunks to VCS
5.4 Describe globalized call routing based on URI dial plans and ILS
5.5 Implement a numbering plan for multi-site topologies

6.0 Implement Call Control Discovery/ILS 14%

6.1 Configure Service Advertisement Framework Forwarder
6.2 Configure Service Advertisement Framework Client Control
6.3 Configure Service Advertisement Framework Call Control Discovery
6.4 Configure URI calling
6.5 Configure ILS network
6.6 Configure Global Dial Plan Replication

7.0 Implement Video Mobility Features 9%

7.1 Configure extension mobility, and device mobility
7.2 Configure unified mobility (including video)

8.0 Implement Bandwidth Management and Call Admission Control on CUCM 12%

8.1 Configure regions
8.2 Implement transcoders and MTPs
8.3 Configure locations CAC and Enhanced CAC
8.4 Correlate events based on traces, logs, debugs and output of monitoring tools
8.5 Parse and interpret traces, logs, debugs and output of monitoring tools

 

22 Oct

210-455 CLDADM Online Test-Introducing Cisco Cloud Administration

Currently, our 210-455 CLDADM online test only provide 10 questions. Answer one question correctly, you can get 10 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

Please go to 210-455 CLDADM Online Test-Introducing Cisco Cloud Administration to view the test

 

cart

22 Oct

210-455 CLDADM Introducing Cisco Cloud Administration

210-455 CLDADM exam is known as Introducing Cisco Cloud Administration. There are 55-65 questions in real Cisco 210-455 CLDADM exam, which will take the candidates 90 minutes to complete the test. The Associated Certifications of Cisco 210-455 exam is CCNA Cloud. The available language is English. Candidates can register Cisco 210-455 exam at Pearson VUE testing center.

Cisco 210-455 CLDADM exam tests a candidate’s knowledge of the basics of Cisco Cloud administration including Cloud provisioning, management, monitoring, reporting, charge-back models and remediation. Knowing Cisco 210-455 CLDADM exam topics are valuable in your preparation.

1.0 Cloud Infrastructure Administration and Reporting 21%

1.1 Configure users/groups and role-based access control in the portal, including basic troubleshooting
1.1.a Describe default roles
1.1.b Configure new user with single role
1.1.c Describe multirole user profiles
1.1.d Configure a user profile
1.2 Perform virtual machine operations
1.2.a Configure live migrations of VMs from host to host
1.2.b Edit VM
1.2.c Configure VM snapshots
1.2.d Describe reverting a VM to a snapshot
1.3 Deploy virtual app containers
1.3.a Provide basic support and troubleshoot app container with firewall, networking, and load balancer

2.0 Chargeback and Billing Reports 10%

2.1 Describe the chargeback model
2.1.a Describe chargeback features
2.1.b Describe budget policy
2.1.c Describe cost models
2.1.d Describe adding a cost model to a tenant
2.2 Generate various reports for virtual and physical accounts
2.2.a Execute billing reports
2.2.b Execute a system utilization reporting
2.2.c Execute a snapshot report

3.0 Cloud Provisioning 26%

3.1 Describe predefined Cisco UCS Director-based services within the Cisco Prime Service Catalog
3.1.a Describe the configuration of service names and icons
3.1.b Describe order permissions
3.1.b (i) RBAC
3.1.c Describe template formats
3.1.c (i) Storage
3.1.c (ii) Compute
3.1.c (iii) Network
3.1.c (iv) Virtualization
3.2 Describe provisioning verification
3.2.a Describe how to place an order for a service from the Cisco Primer Service Catalog as an end-user
3.2.b Verify that provisioning is done correctly
3.2.c Access VMs and applications that have been provisioned
3.3 Deploy preconfigured templates and make minor changes to the service catalog offerings that do not affect workflows or services
3.3.a Describe the deployment of templates: storage, compute, network, and virtualization
3.3.b Describe differences between the templates
3.3.c Describe the need to convert between templates

4.0 Cloud Systems Management and Monitoring 26%

4.1 Identify the components of Cisco Prime Service Catalog
4.1.a End-user store front
4.1.b Stack designer
4.1.c Heat orchestration
4.2 Describe the components of Cisco UCS Director
4.2.a Describe infrastructure management and monitoring
4.2.b Describe orchestration
4.2.c Describe the portal
4.2.d Describe the Bare Metal Agent
4.3 Describe Cisco UCS Performance Manager
4.3.a Describe capacity planning
4.3.b Describe bandwidth monitoring
4.3.c Describe how host groups facilitate dynamic monitoring
4.4 Describe the components of Cisco IAC
4.4.a Describe Cisco Process Orchestrator
4.4.b Describe Cisco Prime Service Catalog
4.4.c Describe Cisco Server Provisioner
4.5 Perform cloud monitoring using Cisco Prime Service Catalog, Cisco UCS Director, Cisco Prime infrastructure
4.5.a Describe fault monitoring
4.5.b Describe performance monitoring
4.5.c Describe monitoring of provisioning outcomes
4.6 Create monitoring dashboards
4.6.a Configure custom dashboards
4.6.b Configure threshold settings

5.0 Cloud Remediation 17%

5.1 Configure serviceability options
5.1.a Configure syslog
5.1.b Configure NTP
5.1.c Configure DNS
5.1.d Configure DHCP
5.1.e Configure SMTP
5.2 Interpret Logs for root cause analysis
5.2.a Analyze fault logs
5.2.b Analyze admin logs
5.2.c Analyze application logs
5.3 Configure backups
5.3.a Configure database backup
5.3.b Configure database restore

21 Oct

210-451 CLDFND Understanding Cisco Cloud Fundamentals

Understanding Cisco Cloud Fundamentals is the exam name of 210-451 CLDFND test. There are 55-65 questions in real Cisco 210-451 CLDFND exam, which will take the candidates 90 minutes to complete the test. The Associated Certifications of Cisco 210-451 CLDFND exam is CCNA Cloud. The available language is English. Candidates can register Cisco 210-451 CLDFND exam at Pearson VUE testing center.

Cisco 210-451 exam tests a candidate’s knowledge of Cloud characteristics and deployment models including Cisco InterCloud; the basics of Cisco Cloud infrastructure i.e. Unified Compute including Cisco UCS and server virtualization, Unified Fabric including DC network architecture and infrastructure virtualization, and Unified Storage including integrated infrastructure solutions. It is helpful for the candidates to know Cisco 210-451 exam topics.

1.0 Cloud Characteristics and Models 14%

1.1 Describe common cloud characteristics
1.1.a On-demand self service
1.1.b Elasticity
1.1.c Resource pooling
1.1.d Metered service
1.1.e Ubiquitous network access (smartphone, tablet, mobility)
1.1.f Multi-tenancy
1.2 Describe Cloud Service Models
1.2.a Infrastructure as a Service (IaaS)
1.2.b Software as a Service (SaaS)
1.2.c Platform as a Service (PaaS)

2.0 Cloud Deployment 16%

2.1 Describe cloud deployment models
2.1.a Public
2.1.b Private
2.1.c Community
2.1.d Hybrid
2.2 Describe the Components of the Cisco Intercloud Solution
2.2.a Describe the benefits of Cisco Intercloud
2.2.b Describe Cisco Intercloud Fabric Services

3.0 Basic Knowledge of Cloud Compute 24%

3.1 Identify key features of Cisco UCS
3.1.a Cisco UCS Manager
3.1.b Cisco UCS Central
3.1.c B-Series
3.1.d C-Series
3.1.e Server identity (profiles, templates, pools)
3.2 Describe Server Virtualization
3.2.a Basic knowledge of different OS and hypervisors

4.0 Basic Knowledge of Cloud Networking 22%

4.1 Describe network architectures for the data center
4.1.a Cisco Unified Fabric
4.1.a.1 Describe the Cisco Nexus product family
4.1.a.2 Describe device virtualization
4.1.b SDN
4.1.b.1 Separation of control and data
4.1.b.2 Programmability
4.1.b.3 Basic understanding Open Daylight
4.1.c ACI
4.1.c.1 Describe how ACI solves the problem not addressed by SDN
4.1.c.2 Describe benefits of leaf/spine architecture
4.1.c.3 Describe the role of APIC Controller
4.2 Describe Infrastructure Virtualization
4.2.a Difference between vSwitch and DVS
4.2.b Cisco Nexus 1000V components
4.2.b.1 VSM
4.2.b.2 VEM
4.2.b.3 VSM appliance
4.2.c Difference between VLAN and VXLAN
4.2.d Virtual networking services
4.2.e Define Virtual Application Containers
4.2.e.1 Three-tier application container
4.2.e.2 Custom container

5.0 Basic Knowledge of Cloud Storage 24%

5.1 Describe storage provisioning concepts
5.1.a Thick
5.1.b Thin
5.1.c RAID
5.1.d Disk pools
5.2 Describe the difference between all the storage access technologies
5.2.a Difference between SAN and NAS; block and file
5.2.b Block technologies
5.2.c File technologies
5.3 Describe basic SAN storage concepts
5.3.a Initiator, target, zoning
5.3.b VSAN
5.3.c LUN
5.4 Describe basic NAS storage concepts
5.4.a Shares / mount points
5.4.b Permissions
5.5 Describe the various Cisco storage network devices
5.5.a Cisco MDS family
5.5.b Cisco Nexus family
5.5.c UCS Invicta (Whiptail)
5.6 Describe various integrated infrastructures
5.6.a FlexPod (NetApp)
5.6.b VBlock (VCE)
5.6.c VSPEX (EMC)
5.6.d OpenBlock (Red Hat)

 

 


Recent Posts


Tags

and/or Remove an End-Device and/or Remove an Infrastructure Device and/or Remove Cables (network and/or power) Cisco 642-997 DCUFI exam Cisco 642-999 DCUCI exam Configure Cisco Unity Connection Configure Cisco Unity Express using the GUI Describe and implement centralized call processing redundancy Describe Data Center Structure and Modularity Describe the Design Methodology Describe the Technologies used within the Data Center Describe WLAN Fundamentals Design and Deploy WLAN Infrastructure for Mobility Design Network Management Considerations into a Data Center Design the Access Layer of a Data Center General Networking Knowledge given a Network Design and a set of Requirements High Availability Routing Features Identify Cisco Equipment and Related Hardware Implement high availability features on Cisco Unified Fabric products in a Cisco Data Center Architecture Implement Multicast over Wireless Implement QoS for Wireless Applications Implement VoWLAN Infrastructure Security Infrastructure Services Install Integrate Client Device Security IP Services LAN Switching Technologies Layer 2 Technologies Layer 3 Technologies Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices Manage the Unified Fabric in a Cisco Data Center Architecture Monitoring and Reporting Tools Network Principles Replace Service-Related Knowledge Threat Defense Threat Defense Architectures Troubleshoot Call Setup Issues Troubleshooting Troubleshoot Registration Issues UCS Compute Troubleshooting VPN Technologies WAN Technologies

Links

Powered by CCNP Exams Test Base