Note:

  • The new CCNP Data Center certification required exams are 300-180 DCIT, 300-165 DCII, 300-160 DCID, 300-175 DCUCI and 300-170 DCVAI exams.
  • The last day to test Cisco 810-403 OUTCOMES exam is December 29, 2017.
  • The last day to test Cisco 820-424 BTASBVA exam is December 29, 2017.
31 Mar

640-875 SPNGN1 Building Cisco Service Provider Next-Generation Networks Part 1

Building Cisco Service Provider Next-Generation Networks Part 1 is the exam name of 640-875 test. The Associated Certifications is CCNA Service Provider. There are 65-75 questions in real Cisco 640-875 test, which will take the candidates 90 minutes to complete the test. The available language is English. Candidates can register Cisco 640-875 exam at Pearson VUE testing center.

The 640-875 Building Cisco Service Provider Next-Generation Networks, Part 1 exam is associated with the Cisco CCNA Service Provider certification. Cisco 640-875 exam tests the basic knowledge and skills that are necessary to support a service provider network.

Cisco 640-875 SPNGN1 Free Online Test Here

Below are 640-875 exam topics for you to master the knowledge points.

12% 1.0 IP Networks

1.1 Describe the purpose and functions of various network devices (at the core, distribution, and access layers)
1.2 Identify the functional components that are required to meet a given network specification
1.3 Describe the OSI and TCP/IP models and their associated protocols to explain how data flows in a network
1.4 Describe common network applications and their impact on the network
1.5 Interpret network diagrams
1.6 Troubleshoot common network problems at Layers 1, 2, 3, 4, and 7 using a layered-model approach
1.7 Describe differences between LAN and WAN operation and features

13% 2.0 IPv4 and IPv6 Addressing

2.1 Describe the structure of IPv4 and IPv6 addresses
2.2 Describe VLSM, CIDR and route summarization concepts
2.3 Describe the different types of IPv4 and IPv6 addresses
2.4 Design an IP subnetting plan that is based on given requirements

12% 3.0 Switched Network Technologies I

3.1 Describe bridging concepts and Layer 2 Ethernet frames
3.2 Configure basic spanning tree operations on Cisco IOS switches
3.3 Interpret the output of various basic show and debug commands to verify the operational status of a Cisco switched network
3.4 Configure basic switch security (that is, port security and securing unused ports)
3.5 Describe Ethernet link bundling LACP, PAgP, and Flex Links

10% 4.0 Routed Network Technologies I

4.1 Describe classful versus classless routing
4.2 Describe routing protocols basics (metrics, IGP versus EGP)
4.3 Describe RIPv1, RIPv2, RIPNG
4.4 Implement EIGRPv4 and EIGRPv6 on Cisco IOS, IOS-XE and IOS-XR routers
4.5 Describe route redistribution
4.6 Describe VRF
4.7 Describe GRE

10% 5.0 IP Services

5.1 Configure NAT (IPv4) on Cisco routers
5.2 Configure DHCP (IPv4 and IPv6) operations on Cisco routers
5.3 Describe ICMPv4 and ICMPv6
5.4 Describe DNS

15% 6.0 Cisco Operating Systems and Platforms I

6.1 Implement basic Cisco IOS, IOS-XE, and IOS-XR CLI operations
6.2 Implement basic Cisco IOS, IOS-XE, and IOS-XR routers configurations

9% 7.0 Transport Technologies

7.1 Describe SONET and SDH
7.2 Describe DWDM, IPoDWDM, and ROADM
7.3 Configure 10 Gigabit Ethernet, 40 Gigabit Ethernet, and 100 Gigabit Ethernet interfaces on Cisco routers
7.4 Describe Frame Relay
7.5 Describe ATM
7.6 Describe Metro Ethernet
7.7 Describe DSL
7.8 Describe T1, T3, E1, E3, and ISDN
7.9 Implement PPP encapsulation on Cisco routers serial and POS interfaces
7.10 Describe cable (DOCSIS)
7.11 Describe the main BRAS and BNG routers functions in IP NGN
7.12 Describe various Passive Optical Network (PON) access technologies and FTTx

10% 8.0 Security in the Network

8.1 Describe Layer 2 security features on Cisco IOS switches
8.2 Configure management plane security on Cisco routers and IOS switches
8.3 Describe IPsec
8.4 Describe control plane security
8.5 Configure basic AAA (TACACS+ and RADIUS) services on Cisco routers
8.6 Configure routing protocols authentication between Cisco routers
8.7 Describe the relationships between users, user groups, tasks groups and task IDs in IOS-XR
8.8 Describe common types of network attacks

9% 9.0 Network Management

9.1 Configure NTP server or client on Cisco routers
9.2 Configure IP SLA on Cisco routers
9.3 Configure CDP on Cisco routers and IOS switches
9.4 Configure SNMP on Cisco routers
9.5 Configure NetFlow on Cisco routers
9.6 Configure logging to Syslog server on Cisco routers
9.7 Describe the Cisco IOS Call-Home feature
9.8 Describe Cisco TAC procedure and navigate Cisco support tools (CCO)
9.9 Implement management access (SSH, telnet, and out-of-band management design)
9.10 Implement SPAN, RSPAN, and ERSPAN
9.11 Implement file transfers to manage network devices configurations and images using FTP, SCP, TFTP, SFTP, and RCP

30 Mar

640-554 IINS Implementing Cisco IOS Network Security

IINS Implementing Cisco IOS Network Security is the exam name of 640-554 test. There are 55-65 questions in real Cisco 640-554 exam, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 640-554 exam at Pearson VUE testing center.

The 640-554 Implementing Cisco IOS Network Security (IINS) exam is associated with the CCNA Security certification. Cisco 640-554 exam tests a candidate’s knowledge of securing Cisco routers and switches and their associated networks.It leads to validated skills for installation, troubleshooting and monitoring of network devices to maintain integrity, confidentiality and availability of data and devices and develops competency in the technologies that Cisco uses in its security infrastructure.

Cisco 640-554 IINS Free Online Test

Knowing Cisco 640-554 IINS exam topics are valuable in your preparation.

11% 1.0 Common Security Threats

1.1 Describe common security threats
1.1.a Common threats to the physical installation
1.1.b Mitigation methods for common network attacks
1.1.c Email-based threats
1.1.d Web-based attacks
1.1.e Mitigation methods for Worm, Virus, and Trojan Horse attacks
1.1.f Phases of a secure network lifecycle
1.1.g Security needs of a typical enterprise with a comprehensive security policy
1.1.h Mobile/remote security
1.1.i DLP

8% 2.0 Security and Cisco Routers

2.1 Implement security on Cisco routers
2.1.a CCP Security Audit feature
2.1.b CCP One-Step Lockdown feature
2.1.c Secure router access using strong encrypted passwords, and using IOS login enhancements, IPV6 security
2.1.d Multiple privilege levels
2.1.e Role-Based CLI
2.1.f Cisco IOS image and configuration files
2.2 Describe securing the control, data, and management plane
2.3 Describe CSM
2.4 Describe IPv4 to IPv6 transition
2.4.a Reasons for IPv6
2.4.b Understanding IPv6 addressing
2.4.c Assigning IPv6 addresses
2.4.d Routing considerations for IPv6

11% 3.0 AAA on Cisco Devices

3.1 Implement AAA (authentication, authorization, and accounting)
3.1a AAA using CCP on routers
3.1b AAA using CLI on routers and switches
3.1c AAA on ASA
3.2 Describe TACACS+
3.3 Describe RADIUS
3.4 Describe AAA
3.4.a Authentication
3.4.b Authroization
3.4.c Accounting

12% 4.0 IOS ACLs

4.1 Describe standard, extended, and named IP IOS ACLs to filter packets
4.1.a IPv4
4.1.b IPv6
4.1.c Object groups
4.1.d ACL operations
4.1.e Types of ACLs (dynamic, reflexive, time-based ACLs)
4.1.f ACL wild card masking
4.1.g Standard ACLs
4.1.h Extended ACLs
4.1.i Named ACLs
4.1.j VLSM
4.2 Describe considerations when building ACLs
4.2.a Sequencing of ACEs
4.2.b Modification of ACEs
4.3 Implement IP ACLs to mitigate threats in a network
4.3.a Filter IP traffic
4.3.b SNMP
4.3.c DDoS attacks
4.3.d CLI
4.3.e CCP
4.3.f IP ACLs to prevent IP spoofing
4.3.g VACLs

10% 5.0 Secure Network Management and Reporting

5.1 Describe secure network management
5.1.a In-band
5.1.b Out of band
5.1.c Management protocols
5.1.d Management enclave
5.1.e Management plane
5.2 Implement secure network management
5.2.a SSH
5.2.b Syslog
5.2.c SNMP
5.2.d NTP
5.2.e SCP
5.2.f CLI
5.2.g CCP
5.2.h SSL

12% 6.0 Common Layer 2 Attacks

6.1 Describe Layer 2 security using Cisco switches
6.1.a STP attacks
6.1.b ARP spoofing
6.1.c MAC spoofing
6.1.d CAM overflows
6.1.e CDP/LLDP
6.2 Describe VLAN security
6.2.a Voice VLAN
6.2.b PVLAN
6.2.c VLAN hopping
6.2.d Native VLAN
6.3 Implement VLANs and trunking
6.3.a VLAN definition
6.3.b Grouping functions into VLANs
6.3.c Considering traffic source to destination paths
6.3.d Trunking
6.3.e Native VLAN
6.3.f VLAN Trunking Protocols
6.3.g Inter-VLAN Routing
6.4 Implement spanning tree
6.4.a Potential issues with redundant switch topologies
6.4.b STP operations
6.4.c Resolving issues with STP

13% 7.0 Cisco Firewall Technologies

7.1 Describe operational strengths and weaknesses of the different firewall technologies
7.1.a Proxy firewalls
7.1.b Packet and stateful packet
7.1.c Application firewall
7.1.d Personal firewall
7.2 Describe stateful firewalls
7.2.a Operations
7.2.b Function of the state table
7.3 Describe the types of NAT used in firewall technologies
7.3.a Static
7.3.b Dynamic
7.3.c PAT
7.4 Implement zone based policy firewall using CCP
7.4.a Zone to zone
7.4.b Self zone
7.5 Implement the Cisco Adaptive Security Appliance (ASA)
7.5.a NAT
7.5.b ACL
7.5.c Default MPF
7.5.d Cisco ASA sec level
7.6 Implement Network Address Translation (NAT) and Port Address Translation (PAT)
7.6.a Functions of NAT, PAT, and NAT Overload
7.6.b Translating Inside Source addresses
7.6.c Overloading Inside global addresses

11% 8.0 Cisco IPS

8.1 Describe Intrusion Prevention System (IPS) deployment considerations
8.1.a SPAN
8.1.b IPS product portfolio
8.1.c Placement
8.1.d Caveats
8.2 Describe IPS technologies
8.2.a Attack responses
8.2.b Monitoring options
8.2.c Syslog
8.2.d SDEE
8.2.e Signature engines
8.2.f Signatures
8.2.g Global correlation and SIO
8.2.h Network-based
8.2.i Host-based
8.3 Configure Cisco IOS IPS using CCP
8.3.a Logging
8.3.b Signatures

12% 9.0 VPN Technologies

9.1 Describe the different methods used in cryptography
9.1.a Symmetric
9.1.b Asymetric
9.1.c HMAC
9.1.d Message digest
9.1.e PKI
9.2 Describe VPN technologies
9.2.a IPsec
9.2.b SSL
9.3 Describe the building blocks of IPSec
9.3.a IKE
9.3.b ESP
9.3.c AH
9.3.d Tunnel mode
9.3.e Transport mode
9.4 Implement an IOS IPSec site-to-site VPN with pre-shared key authentication
9.4.a CCP
9.4.b CLI
9.5 Verify VPN operations
9.6 Implement SSL VPN using ASA device manager
9.6.a Clientless
9.6.b AnyConnect

28 Mar

640-916 DCICT Introducing Cisco Data Center Technologies

640-916 DCICT is the offical code of Introducing Cisco Data Center Technologies. The Associated Certification is CCNA Data Center Certification.There are 65-75 questions in real Cisco 640-916 DCICT exam, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 640-916 exam at Pearson VUE testing center.

The 640-916 DCICT Introducing Cisco Data Center Technologies is one of the exams associated with the CCNA Datacenter Certification. Cisco 640-916 exam tests a candidate’s knowledge of fundamental Data center technologies like network and server Virtualization, Storage, Convergent I/O and network services like load balancing.

Cisco 640-916 DCICT Free Online Test

Cisco 640-916 DCICT exam topics are valuable in your preparation. Below are the details.

1.0 Cisco Data Center Fundamentals Concepts 30%

1.1 Describe network architectures for the Data Center describe the purpose and functions of various network devices 1.1.a LAN
1.1.b SAN
1.2 Describe the Modular Approach in Network Design
1.3 Describe the data center core layer
1.4 Describe the data center aggregation layer
1.5 Describe the data center access layer
1.6 Describe the collapse core model
1.7 Describe FabricPath
1.8 Identify key differentiator between DCI and network interconnectivity
1.9 Describe, configure, and verify vPC
1.10 Describe the functionality of and configuration of port channels
1.11 Describe and configure virtual device context (VDC)
1.12 Describe the edge/core layers of the SAN
1.13 Describe the Cisco Nexus product family
1.14 Configure and verify network connectivity
1.15 Identify control and data plane traffic
1.16 Perform initial set up

2.0 Data Center Unified Fabric 20%

2.1 Describe FCoE
2.2 Describe FCoE multihop
2.3 Describe VIFs
2.4 Describe FEX products
2.5 Perform initial set up

3.0 Storage Networking 18%

3.1 Describe initiator target
3.2 Verify SAN switch operations
3.3 Describe basic SAN connectivity
3.4 Describe the different storage array connectivity
3.5 Verify name server login
3.6 Describe, configure, and verify zoning
3.7 Perform initial set up
3.8 Describe, configure, and verify VSAN

4.0 DC Virtualization 14%

4.1 Describe device Virtualization
4.2 Describe Server Virtualization
4.3 Describe Nexus 1000v
4.4 Verify initial set up and operation for Nexus 1k

5.0 Unified Computing 17%

5.1 Describe and verify discovery operation
5.2 Describe, configure, and verify connectivity
5.3 Perform initial set up
5.4 Describe the key features of UCSM

6.0 Data Center Network Services 1%

6.1 Describe standard ACE features for load balancing
6.2 Describe server load balancing virtual context and HA
6.3 Describe server load balancing management options
6.4 Describe the benefits of Cisco Global Load Balancing Solution
6.5 Describe how the Cisco global load balancing solution integrates with local Cisco load balancers
6.6 Describe Cisco WAAS needs and advantages in the Data Center.

 

27 Mar

640-911 DCICN Introducing Cisco Data Center Networking

Introducing Cisco Data Center Networking is the exam name of 640-911 DCICN test. The Associated Certification is CCNA Data Center Certification. There are 65-75 questions in real Cisco 640-911 DCICN exam, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 640-911 DCICN exam at Pearson VUE testing center.

The 640-911 DCICN Introducing Cisco Data Center Networking is one of the exams associated with the CCNA Datacenter Certification. Cisco 640-911 DCICN exam tests a candidate’s knowledge of networking concepts for the Data Center environment, based on Nexus-OS. You will learn fundamental information on how a Data center network works, how to configure virtualization in the network, addressing schemes, troubleshooting and configuration skills.

Cisco 640-911 DCICN Free Online Test

Knowing Cisco 640-911 DCICN exam objectives are valuable in your preparation.

1.0 Describe How a Network Works 15%

1.1 Describe the purpose and functions of various network devices
1.1.a Interpret a network diagram
1.1.b Define physical network topologies
1.2 Select the components required to meet a network specification
1.2.a Switches
1.3 Use the OSI and TCP/IP models and their associated protocols to explain how data flows in a network
1.3.a IP
1.3.b TCP
1.3.c UDP
1.4 Describe the purpose and basic operation of the protocols in the OSI and TCP
1.4.a TCP/IP
1.4.b OSI layers

2.0 Configure, Verify and Troubleshoot a Switch with VLANs and Interswitch Communications Using Nexus 21%

2.1 Explain the technology and media access control method for Ethernet
2.1.a IEEE 802 protocols
2.1.b CSMA/CD
2.2 Explain basic switching concepts and the operation of Cisco switches
2.2.a Layer 2 addressing
2.2.b MAC table
2.2.c Flooding
2.3 Describe and configure enhanced switching technologies
2.3.a VTP
2.3.b VLAN
2.4.c 802.1q
2.5.d STP

3.0 Implement an IP Addressing Scheme and IP Services to Meet Network Requirements in a Medium-Size Enterprise Branch Office Network Using Nexus 12%

3.1 Describe the operation and benefits of using private and public IP addressing
3.1.a Classfull IP addressing
3.1.b RFC 1918
3.1.c RFC 4193
3.2 Describe the difference between IPv4 and IPv6 addressing schemes
3.2.a Comparative address space
3.3.b Host addressing

4.0 Configure, Verify, and Troubleshoot Basic Router Operation and Routing on Cisco Devices Using Nexus 52%

4.1 Describe and configure basic routing concepts
4.1.a Packet forwarding
4.1.b Router look-up process (Exec mode, Exec commands, Configuration mode)
4.2 Describe the operation of Cisco routers
4.2.a Router boot-up process
4.2.b POST
4.3.c Router components

 

26 Mar

640-864 DESGN Designing for Cisco Internetwork Solutions

Designing for Cisco Internetwork Solutions is the full name of 640-864 DESGN test. The Associated Certification is CCDA. There are 50-60 questions in real Cisco 640-864 test, which will take the candidates 75 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 640-864 exam at Pearson VUE testing center.

Cisco 640-864 exam requires a foundation or apprentice knowledge of network design for the Cisco converged networks based on borderless network architecture. CCDA certified professionals can design routed and switched network infrastructures and services involving LAN, WAN, wireless, and broadband access for businesses and organizations.

Knowing Cisco 640-864 DESGN exam objectives are helpful in your preparation.

10% 1.0 Describe the Methodology Used to Design a Network

1.1 Describe developing business trends
1.2 Identify network requirements to support the organization
1.3 Describe the tools and process to characterize an existing network
1.4 Describe the top down approach to network design
1.5 Describe network management protocols and features

13% 2.0 Describe Network Structure and Modularity

2.1 Describe the network hierarchy
2.2 Describe the modular approach in network design
2.3 Describe network architecture for the enterprise

27% 3.0 Design Basic Enterprise Campus Networks

3.1 Describe campus design considerations
3.2 Design the enterprise campus network
3.3 Design the enterprise data center
3.4 Describe enterprise network virtualization tools

10% 4.0 Design Enterprise Edge and Remote Network Modules

4.1 Describe the enterprise edge, branch, and teleworker design characteristics
4.2 Describe physical and logical WAN connectivity
4.3 Design the branch office WAN solutions
4.4 Describe access network solutions for a remote worker
4.5 Design the WAN to support selected redundancy methodologies
4.6 Identify Design Considerations for a Remote Data Center

21% 5.0 Design IP Addressing and Routing Protocols

5.1 Describe IPv4 addressing
5.2 Describe IPv6 addressing
5.3 Identify routing protocol considerations in an enterprise network
5.4 Design a routing protocol deployment

19% 6.0 Design Network Services

6.1 Describe the security lifecycle
6.2 Identify Cisco technologies to mitigate security vulnerabilities
6.3 Select appropriate Cisco security solutions and deployment placement
6.4 Describe high level voice and video architectures
6.5 Identify the design considerations for voice and video services
6.6 Describe Cisco Unified Wireless Network architectures and features
6.7 Design wireless network using controllers

 

25 Mar

200-101 ICND2 Interconnecting Cisco Networking Devices Part 2

200-101 ICND2 is the official code of Interconnecting Cisco Networking Devices Part 2. The Associated Certification is CCNA Routing and Switching. There are 50-60 questions in real Cisco 200-101 ICND2 exam, which will take the candidates 75 minutes to complete the test. The available language is English. Candidates can register Cisco 200-101 exam at Pearson VUE testing center.

The 200-101 Interconnecting Cisco Networking Devices Part 2 (ICND2) is the exam associated with the CCNA Routing and Switching certification. Cisco 200-101 exam tests a candidate’s knowledge and skills required to successfully install, operate, and troubleshoot a small to medium-size enterprise branch network.

Cisco 200-101 ICND2 Free Online Test

To prepare Cisco 200-101 exam, it is useful for the candidates to know cisco 200-101 exam objectives.

21% 1.0 LAN Switching Technologies

1.1 Identify enhanced switching technologies
1.1.a RSTP
1.1.b PVSTP
1.1.c EtherChannels
1.2 Configure and verify PVSTP operation
1.2.a Describe root bridge election
1.2.b Spanning tree mode

26% 2.0 IP Routing Technologies

2.1 Describe the boot process of Cisco IOS routers
2.2 Configure and verify operation status of a serial interface
2.3 Manage Cisco IOS files
2.3.a Boot preferences
2.3.b Cisco IOS image(s)
2.3.c Licensing
2.3.c (i) Show license
2.3.c (ii) Change license
2.4 Differentiate methods of routing and routing protocols
2.4.a Administrative distance
2.4.b Split horizon
2.4.c Metric
2.4.d Next hop
2.5 Configure and verify OSPF (multi-area)
2.5.a Neighbor adjacencies
2.5.b OSPF states
2.5.c Configure OSPF v2
2.5.d Configure OSPF v3
2.5.e Router ID
2.5.f Understand LSA types and purpose
2.6 Configure and verify EIGRP (single AS)
2.6.a Feasible distance/feasible successors/administrative distance
2.6.b Feasibility condition
2.6.c Metric composition
2.6.d Router ID
2.6.e Auto summary
2.6.f Path selection
2.6.g Load balancing
2.6.g (i) Equal
2.6.g (ii) Unequal
2.6.h Passive interface

6% 3.0 IP Services

3.1 Recognize high availability (FHRP)
3.1.a VRRP
3.1.b HSRP
3.1.c GLBP
3.2 Configure and verify syslog
3.2.a Utilize syslog output
3.3 Describe SNMP v2 & v3

32% 4.0 Troubleshooting

4.1 Identify and correct common network problems
4.2 Utilize netflow data
4.3 Troubleshoot and resolve spanning tree operation issues
4.3.a Verify root switch
4.3.b Verify priority
4.3.c Verify mode is correct
4.3.d Verify port states
4.4 Troubleshoot and resolve routing issues
4.4.a Verify routing is enabled (SHIP protocols)
4.4.b Verify routing table is correct
4.4.c Verify correct path selection
4.5 Troubleshoot and resolve OSPF problems
4.5.a Verify neighbor adjancies
4.5.b Verify hello and dead timers
4.5.c Verify OSPF area
4.5.d Verify interface MTU
4.5.e Verify network types
4.5.f Verify neighbor states
4.5.g Review OSPF topology table `
4.6 Troubleshoot and resolve EIGRP problems
4.6.a Verify neighbor adjancies
4.6.b Verify AS number
4.6.c Verify load balancing
4.6.d Split horizon
4.7 Troubleshoot and resolve inter VLAN routing problems
4.7.a Verify connectivity
4.7.b Verify encapsulation
4.7.c Verify subnet
4.7.d Verify native VLAN
4.7.e Port mode trunk status
4.8 Troubleshoot and resolve WAN implementation issues
4.8.a Serial interfaces
4.8.b Frame relay
4.8.c PPP
4.9 Monitor NetFlow statistics
4.10 Troubleshoot EtherChannel problems

15% 5.0 WAN technologies

5.1 Identify different WAN Technologies
5.1.a Metro Ethernet
5.1.b VSAT
5.1.c Cellular 3G/4G
5.1.d MPLS
5.1.e T1/E1
5.1.f ISDN
5.1.g DSL
5.1.h Frame relay
5.1.i Cable
5.1.j VPN
5.2 Configure and verify a basic WAN serial connection
5.3 Configure and verify a PPP connection between Cisco routers
5.4 Configure and verify Frame Relay on Cisco routers
5.5 Implement and troubleshoot PPPoE

24 Mar

200-120 CCNA Cisco Certified Network Associate Exam

Cisco Certified Network Associate Exam is the full name of 200-120 CCNA test. The Associated Certifications is CCNA Routing and Switching. There are 50-60 questions in real Cisco 200-120 CCNA exam, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 200-120 CCNA exam at Pearson VUE testing center.

The 200-120 CCNA is the composite exam associated with the Cisco CCNA Routing and Switching certification. Cisco 200-120 CCNA exam tests a candidate’s knowledge and skills required to install, operate, and troubleshoot a small to medium size enterprise branch network.

Cisco 200-120 CCNA Free Online Test

Cisco 200-120 CCNA exam topics are helpful in your preparation. Below are the details from the offical website.

5% 1.0 Operation of IP Data Networks

1.1 Recognize the purpose and functions of various network devices such as Routers, Switches, Bridges and Hubs
1.2 Select the components required to meet a given network specification
1.3 Identify common applications and their impact on the network
1.4 Describe the purpose and basic operation of the protocols in the OSI and TCP/IP models
1.5 Predict the data flow between two hosts across a network
1.6 Identify the appropriate media, cables, ports, and connectors to connect Cisco network devices to other network devices and hosts in a LAN

20% 2.0 LAN Switching Technologies

2.1 Determine the technology and media access control method for Ethernet networks
2.2 Identify basic switching concepts and the operation of Cisco switches.
2.2.a Collision Domains
2.2.b Broadcast Domains
2.2.c Ways to switch
2.2.c (i) Store
2.2.c (ii) Forward
2.2.c (iii) Cut through
2.2.c (iv) CAM table
2.3 Configure and verify initial switch configuration including remote access management
2.3.a hostname
2.3.b Managment IP address
2.3.c IP default-gateway
2.3.d Local user and password
2.3.e Enable secret password
2.3.f Console and VTY logins
2.3.g exec-timeout
2.3.h Service password encryption
2.3.i copy run start
2.4 Verify network status and switch operation using basic utilities
2.4.a ping
2.4.b telnet
2.4.c SSH
2.5 Describe how VLANs create logically separate networks and the need for routing between them
2.5.a Explain network segmentation and basic traffic management concepts
2.6 Configure and verify VLANs
2.7 Configure and verify trunking on Cisco switches
2.7.a DTP (topic)
2.7.b Auto-negotiation
2.8 Identify enhanced switching technologies
2.8.a RSTP
2.8.b PVSTP
2.8.c EtherChannels
2.9 Configure and verify PVSTP operation
2.9.a Describe root bridge election
2.9.b Spanning tree mode

5% 3.0 IP addressing (IPv4/IPv6)

3.1 Describe the operation and necessity of using private and public IP addresses for IPv4 addressing
3.2 Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment
3.3 Identify the appropriate IPv4 addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN LAN/WAN environment
3.4 Describe the technological requirements for running IPv6 in conjunction with IPv4
3.4.a Dual stack
3.5 Describe IPv6 addresses
3.5.a Global unicast
3.5.b Multicast
3.5.c Link local
3.5.d Unique local
3.5.e EUI 64
3.5.f Auto-configuration

20% 4.0 IP Routing Technologies

4.1 Describe basic routing concepts
4.1.a Packet forwarding
4.1.b Router lookup process
4.1.c Process Switching/Fast Switching/CEF
4.2 Configure and verify utilizing the CLI to set basic router configuration
4.2.a Hostname
4.2.b Local user and password
4.2.c Enable secret password
4.2.d Console and VTY logins
4.2.e exec-timeout
4.2.f Service password encryption
4.2.g Interface IP Address
4.2.g (i) loopback
4.2.h banner
4.2.i MOTD
4.2.j copy run start
4.3 Configure and verify operation status of a device interface
4.3.a Serial
4.3.b Ethernet
4.4 Verify router configuration and network connectivity using
4.4.a ping
4.4.a (i) Extended ping
4.4.b traceroute
4.4.c telnet
4.4.d SSH
4.4.e Show cdp neighbors
4.5 Configure and verify routing configuration for a static or default route given specific routing requirements
4.6 Differentiate methods of routing and routing protocols
4.6.a Static vs. dynamic
4.6.b Link state vs. distance vector
4.6.c next hop
4.6.d IP routing table
4.6.e Passive Interfaces (how they work)
4.6.f Administrative distance
4.6.g split horizon
4.6.h metric
4.7 Configure and verify OSPF
4.7.a Benefit of single area
4.7.b Configure OSPv2
4.7.c Configure OSPv3
4.7.d Router ID
4.7.e Passive Interface
4.7.f Discuss multi-area OSPF
4.7.g Understand LSA types and purpose
4.8 Configure and verify interVLAN routing (Router on a stick)
4.8.a Sub interfaces
4.8.b Upstream routing
4.8.c Encapsulation
4.9 Configure SVI interfaces
4.10 Manage Cisco IOS Files
4.10.a Boot Preferences
4.10.b Cisco IOS Images (15)
4.10.c Licensing
4.10.c (i) Show license
4.10.c (ii) Change license
4.11 Configure and verify EIGRP (single AS)
4.11.a Feasible Distance/Feasible Successors/Administrative distance
4.11.b Feasibility condition
4.11.c Metric composition
4.11.d Router ID
4.11.e Auto summary
4.11.f Path Selection
4.11.g Load Balancing
4.11.g (i) Unequal
4.11.g (ii) Equal

10% 5.0 IP Services

5.1 Configure and verify DHCP (IOS Router)
5.1.a Configuring router interfaces to use DHCP
5.1.b DHCP options (Basic overview and functionality)
5.1.c Excluded addresses
5.1.d Lease time
5.2 Describe the types, features, and applications of ACLs
5.2.a Standard (editing and sequence numbers)
5.2.b Extended
5.2.c Named
5.2.d Numbered
5.2.e Log option
5.3 Configure and verify ACLs in a network environment
5.3.a Named
5.3.b Numbered
5.3.c Log option
5.4 Identify the basic operation of NAT
5.4.a Purpose
5.4.b Pool
5.4.c Static
5.4.d 1 to 1
5.4.e Overloading
5.4.f Source addressing
5.4.g One-way NAT
5.5 Configure and verify NAT for given network requirements
5.6 Configure and verify NTP as a client
5.7 Recognize High availability (FHRP)
5.7.a VRRP
5.7.b HSRP
5.7.c GLBP
5.8 Configure and verify syslog
5.8.a Utilize syslog output
5.9 Describe SNMP v2 and v3

10% 6.0 Network Device Security

6.1 Configure and verify network device security features
6.1.a Device password security
6.1.b Enable secret vs enable
6.1.c Transport
6.1.c (i) Disable telnet
6.1.c (ii) SSH
6.1.d VTYs
6.1.e Physical security
6.1.f Service password
6.1.g Describe external authentication methods
6.2 Configure and verify switch port security
6.2.a Sticky MAC
6.2.b MAC address limitation
6.2.c Static/dynamic
6.2.d Violation modes
6.2.d (i) errDisable
6.2.d (ii) shutdown
6.2.d (iii) protect restrict
6.2.e Shutdown unused ports
6.2.f errDisable recovery
6.2.g Assign unused ports to an unused VLAN
6.2.h Putting native VLAN to other than VLAN 1
6.3 Configure and verify ACLs to filter network traffic
6.4 Configure and verify an ACLs to limit telnet and SSH access to the router

20% 7.0 Troubleshooting

7.1 Troubleshoot and correct common problems associated with IP addressing and host configurations
7.2 Troubleshoot and resolve VLAN problems
7.2.a Identify that VLANs are configured
7.2.b Verify port membership correct
7.2.c Correct IP address is configured
7.3 Troubleshoot and resolve trunking problems on Cisco switches
7.3.a Verify correct trunk states
7.3.b Verify correct encapsulation id configured
7.3.c Correct VLANs allowed
7.4 Troubleshoot and resolve ACL issues
7.4.a Verify statistics
7.4.b Verify permitted networks
7.4.c Verify direction
7.4.c (i) Interface
7.5 Troubleshoot and resolve Layer 1 problems
7.5.a Framing
7.5.b CRC
7.5.c Runts
7.5.d Giants
7.5.e Dropped packets
7.5.f Late collisions
7.5.g Input/output errors
7.6 Identify and correct common network problems
7.7 Troubleshoot and resolve spanning tree operation issues
7.7.a Verify root switch
7.7.b Verify priority
7.7.c Verify mode is correct
7.7.d Verify port states
7.8 Troubleshoot and resolve routing issues
7.8.a Verify routing is enabled (SHIP protocols)
7.8.b Verify routing table is correct
7.8.c Verify correct path selection
7.9 Troubleshoot and resolve OSPF problems
7.9.a Verify neighbor adjacencies
7.9.b Verify hello and dead timers
7.9.c Verify OSPF area
7.9.d Verify interface MTU
7.9.e Verify network types
7.9.f Verify neighbor states
7.9.g Review OSPF topology table
7.10 Troubleshoot and resolve EIGRP problems
7.10.a Verify neighbor adjacencies
7.10.b Verify AS number
7.10.c Verify load balancing
7.10.d Split horizon
7.11 Troubleshoot and resolve interVLAN routing problems
7.11.a Verify connectivity
7.11.b Verify encapsulation
7.11.c Verify subnet
7.11.d Verify native VLAN
7.11.e Port mode trunk status
7.12 Troubleshoot and resolve WAN implementation issues
7.12.a Serial interfaces
7.12.b Frame relay
7.12.c PPP
7.13 Monitor NetFlow statistics
7.14 Troubleshoot EtherChannel problems

10% 8.0 WAN Technologies

8.1 Identify different WAN Technologies
8.1.a Metro Ethernet
8.1.b VSAT
8.1.c Cellular 3G/4G
8.1.d MPLS
8.1.e T1/E1
8.1.f ISDN
8.1.g DSL
8.1.h Frame relay
8.1.i Cable
8.1.j VPN
8.2 Configure and verify a basic WAN serial connection
8.3 Configure and verify a PPP connection between Cisco routers
8.4 Configure and verify frame relay on Cisco routers
8.5 Implement and troubleshoot PPPoE

 

23 Mar

640-692 RSTECH Supporting Cisco routing and Switching Network Devices

The 640-692 RSTECH is the exam associated with CCT Routing and Switching certification. Cisco CCT Routing and Switching certification focuses on the skills required for onsite support and maintenance of Cisco routers, switches, and operating environments.

Technicians in this area must be able to identify Cisco router and switch models, accessories, cabling, and interfaces; understand the Cisco IOS Software operating modes and identify commonly found software; and be able to use the Cisco Command Line Interface (CLI) to connect and service products.

There are 60-70 questions in real Supporting Cisco routing and Switching Network Devices 640-692 RSTECH exam, which will take the candidates 90 minutes to complete the test. The available language is English. Candidates can register Cisco 640-692 RSTECH exam at Pearson VUE testing center.

Cisco 640-692 RSTECH Free Online Test

Cisco 640-692 RSTECH exam topics are below.

27% 1.0 Identify Cisco Equipment and Related Hardware

1.1 Identify the interfaces on Cisco equipment including the Cisco Catalyst 6500, 4500, 3560, 3750 and 2975 & 2960 Series switches and Cisco 2800, 2900, 3800, 3900, 7200, 7300, 7600 Series Integrated Service routers.
1.2 Identify the cabling on Cisco equipment
1.3 Identify Cisco products by logo marking and model number (including, but not limited to, locations on chassis, line card, module, or adapter)
1.4 Identify and locate the serial number of Cisco products (including, but not limited to, locations on chassis, line card, module, or adapter)
1.5 Identify and describe the commonly used components
1.6 Describe the hardware memory common terms and use in Cisco routers and switches

27% 2.0 Describe Cisco IOS Software Operation

2.1 Describe the different operating modes for Cisco CatOS / IOS Software
2.2 Navigate between the different operating modes listed
2.3 Determine the current mode of the device
2.4 Copy and paste a configuration file from / to a router or switch
2.5 Know how to use and interpret the basic Cisco IOS Software commands
2.6 Describe where to find the configuration register parameter and how to change it
2.7 Identify a configuration file from a Cisco device
2.8 Perform software upgrade or downgrade using TFTP, xmodem, tftpdnld, flash memory, memory card reader, or USB
2.9 Perform password recovery on a Cisco device

27% 3.0 General Networking Knowledge

3.1 Describe in general terms the basic functionality and key differences for the following hardware: LAN switch, router, modem, and Wireless Access Points
3.2 Describe what an IP address and subnet is
3.2 Differentiate between these Layer 2 technologies: Ethernet, Fast Ethernet, Gigabit Ethernet, Serial, ATM, ISDN, DSL, Optical, and so on
3.2 Describe what FTP does
3.2 Describe what TFTP does
3.2 Describe what a CSU/DSU does (such as, loop back processes, and so on)
3.2 Describe Telco termination point (such as, demarc, and so on)
3.2 Describe what Telnet and SSH does
3.2 Describe what ping does
3.2 Use the OSI and TCP/IP models and their associated protocols to explain how data flows in a network
3.2 Identify and correct common network problems at Layers 1 and 2

23% 4.0 Service-related Knowledge

4.1 Locate and use a text editor (such as, Notepad)
4.2 Locate and use Terminal Emulation
4.3 Locate and use the Window command prompt
4.4 Configure networks settings for Ethernet port on laptop (IP address, subnet mask and default gateway) and establish a connection with Ethernet ports on Cisco equipment
4.5 Make a physical connection from laptop to Cisco console port
4.6 Make a physical Ethernet connection from laptop to Cisco device Ethernet port using correct cable
4.7 Use modem to connect to Cisco console port and phone line
4.8 Configure the correct DIP switch settings on the modem (or other appropriate settings)
4.9 Identify the different loop-back plugs
4.10 Identify null modem cable and application
4.11 Configure and use TFTP server (such as, TFTP d32)
4.12 Use the hardware tools needed for repair

21 Mar

010-151 DCTECH Cisco Certified Technician (CCT) for Data Center

Cisco Certified Technician (CCT) for Data Center is the full name of 010-151 DCTECH exam. The Associated Certifications is CCT Data Center. There are 65-75 questions in real Cisco 010-151 DCTECH exam, which will take the candidates 90 minutes to complete the test. The available language is English. Candidates can register Cisco 010-151 DCTECH exam at Pearson VUE testing center.

The Cisco Certified Technician (CCT) for Data Center validates a technician’s competency in the following areas; basic Cisco NX-OS configuration, Cisco Data Center products and hardware components with an emphasis on the Cisco Unified Computing System (UCS).

Cisco 010-151 DCTECH Free Online Test

Cisco 010-151 DCTECH exam objectives are important in your preparation.

17% 1.0 General Networking Knowledge

1.1 Demonstrate a high level understanding of SAN technology
1.2 Describe what an IP address and subnet is. Add default gateway and subnet mask
1.3 Differentiate between these Layer 2 technologies: Ethernet, Fast Ethernet, Gigabit Ethernet
1.4 Describe what FTP does
1.5 Describe what TFTP does
1.6 Describe what Telnet does
1.7 Describe what ping does
1.8 Use the OSI and TCP/IP models and their associated protocols to explain how data flows in a network
1.9 Identify and correct common network problems at Layers 1 and 2
1.10 Identify the cabling and connectors

25% 2.0 Identify Cisco Equipment and Related Hardware

2.1 Describe the Cisco Unified Computing System components and chassis layout
2.2 Describe the Cisco Unified Computing System LED
2.3 Describe the UCS C-series rack mount servers components and chassis layout
2.4 Describe the Cisco Nexus 2000 series fabric extender components
2.5 Identify Cisco Nexus 2000 series fabric extender cabling types
2.6 Describe the Cisco Nexus 5000 series switch components
2.7 Describe the Cisco Nexus 7000 series switch components
2.8 Describe the Cisco MDS 9000 product family components
2.9 Identifying the MDS 9000 Family Storage networking modules
2.10 Identify Cisco products by logo marking and model number (including, but not limited to locations on chassis, line card, module, or adapter)
2.11 Identify and locate the serial number of Cisco products (including but not limited to locations on chassis, line card, module, or adapter)

25% 3.0 Describe Cisco NX-OS Software Operation

3.1 Describe the Cisco Integrated Management Controller (CIMC)
3.2 Describe features and functionality of UCS Manager
3.3 Describe the different command modes for Cisco NX-OS software
3.4 Determine the current mode of the device
3.5 Know how to export technical support data
3.6 Verify the device configuration
3.7 Know how to use and interpret the basic Cisco NX-OS commands
3.8 Identify a configuration file from a Cisco device
3.9 Using the device file systems, directories, and files
3.10 Perform password recovery on a Cisco NX-OS switch device

33% 4.0 Service-Related Knowledge

4.1 Make a physical connection from laptop to Cisco console port
4.2 Perform installation process steps and expected outcomes
4.3 Perform initial setup tasks
4.4 Service restoration verification
4.5 Perform remedial procedures on Cisco devices
4.6 Use the hardware tools needed for repair
4.7 Upgrade the BIOS on a UCS Server Blade with the GUI
4.8 Upgrade Cisco Integrated Management Controller firmware on a UCS Server C-Series

20 Mar

100-101 ICND1 Interconnecting Cisco Networking Devices Part 1

The 100-101 Interconnecting Cisco Networking Devices Part 1 (ICND1) is the exam associated with the CCENT certification and a tangible first step in achieving the CCNA Routing and Switching certification. This 100-101 ICND1 exam tests a candidate’s knowledge and skills required to successfully install, operate, and troubleshoot a small branch office network.

In real Cisco 100-101 ICND1 exam, there are 45-55 questions, which will take the candidates 90 minutes to complete the test. The available languages are English and Japanese. Candidates can register Cisco 100-101 ICND1 exam at Pearson VUE testing center.

Cisco 100-101 ICND1 Free Online Test

Knowing Cisco 100-101 ICND1 exam topics is also important in your preparation.

1.0 Operation of IP Data Networks 6%

1.1 Recognize the purpose and functions of various network devices such as routers, switches, bridges and hubs
1.2 Select the components required to meet a given network specification
1.3 Identify common applications and their impact on the network
1.4 Describe the purpose and basic operation of the protocols in the OSI and TCP/IP models
1.5 Predict the data flow between two hosts across a network
1.6 Identify the appropriate media, cables, ports, and connectors to connect Cisco network devices to other network devices and hosts in a LAN

2.0 LAN Switching Technologies 21%

2.1 Determine the technology and media access control method for Ethernet networks
2.2 Identify basic switching concepts and the operation of Cisco switches
2.2.a Collision domains
2.2.b Broadcast domains
2.2.c Ways to switch
2.2.c [i] Store
2.2.c [ii] Forward
2.2.c [iii] Cut through
2.2.c [iv] CAM Table
2.3 Configure and verify initial switch configuration including remote access management
2.3.a hostname
2.3.b mgmt ip address
2.3.c Ip default-gateway
2.3.d local user and password
2.3.e enable secret password
2.3.f console and VTY logins
2.3.g exec-timeout
2.3.h service password encryption
2.3.i copy run start
2.4 Verify network status and switch operation using basic utilities such as
2.4.a ping
2.4.b telnet
2.4.c SSH
2.5 Describe how VLANs create logically separate networks and the need for routing between them
2.5.a Explain network segmentation and basic traffic management concepts
2.6 Configure and verify VLANs
2.7 Configure and verify trunking on Cisco switches
2.7.a DTP (topic)
2.7.b Auto-negotiation

3.0 IP addressing (IPv4/IPv6) 11%

3.1 Describe the operation and necessity of using private and public IP addresses for IPv4 addressing
3.2 Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment
3.3 Identify the appropriate IPv4 addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN environment
3.4 Describe the technological requirements for running IPv6 in conjunction with IPv4
3.4.a Dual stack
3.5 Describe IPv6 addresses
3.5.a Global unicast
3.5.b Multicast
3.5.c Link local
3.5.d Unique local
3.5.e EUI 64
3.5.f Auto-configuration

4.0 IP Routing Technologies 26%

4.1 Describe basic routing concepts
4.1.a Packet forwarding
4.1.b Router lookup process
4.1.c Process Switching/Fast Switching/CEF
4.2 Configure and verify utilizing the CLI to set basic Router configuration
4.2.a Hostname
4.2.b Local user & password
4.2.c Enable secret password
4.2.d Console & VTY logins
4.2.e exec-timeout
4.2.f service password encryption
4.2.g Interface IP Address
4.2.g [i] loopback
4.2.h banner
4.2.i motd
4.2.j copy run start
4.3 Configure and verify operation status of an Ethernet interface
4.4 Verify router configuration and network connectivity using
4.4.a ping
4.4.a [i] Extended ping
4.4.b traceroute
4.4.c telnet
4.4.d SSH
4.4.e Show cdp neighbors
4.5 Configure and verify routing configuration for a static or default route given specific routing requirements
4.6 Differentiate methods of routing and routing protocols
4.6.a Static vs. dynamic
4.6.b Link state vs. distance vector
4.6.c Next hop
4.6.d Ip routing table
4.6.e Passive interfaces (how they work)
4.7 Configure and verify OSPF (single area)
4.7.a Benefit of single area
4.7.b Configure OSPv2 in a single area
4.7.c Configure OSPv3 in a single area
4.7.d Router ID
4.7.e Passive interface
4.8 Configure and verify interVLAN routing (router on a stick)
4.8.a Sub interfaces
4.8.b Upstream routing
4.8.c Encapsulation
4.9 Configure SVI interfaces.

5.0 IP Services 8%

5.1 Configure and verify DHCP (IOS router)
5.1.a Configuring router interfaces to use DHCP
5.1.b DHCP options (Basic overview and functionality)
5.1.c Excluded addresses
5.1.d Lease time
5.2 Describe the types, features, and applications of ACLs
5.2.a Standard (editing and sequence numbers)
5.2.b Extended
5.2.c Named
5.2.d Numbered
5.2.e Log option
5.3 Configure and verify ACLs in a network environment
5.3.a Named
5.3.b Numbered
5.3.c Log option
5.4 Identify the basic operation of NAT
5.4.a Purpose
5.4.b Pool
5.4.c Static
5.4.d 1 to 1
5.4.e Overloading
5.4.f Source addressing
5.4.g One-way NAT
5.5 Configure and verify NAT for given network requirements
5.6 Configure and verify NTP as a client

6.0 Network Device Security 15%

6.1 Configure and verify network device security features
6.1.a Device password security
6.1.b Enable secret vs. enable
6.1.c Transport
6.1.c [i] Disable telnet
6.1.c [ii] SSH
6.1.d VTYs
6.1.e Physical security
6.1.f Service password
6.1.g Describe external authentication methods
6.2 Configure and verify switch port security
6.2.a Sticky mac
6.2.b MAC address limitation
6.2.c Static/dynamic
6.2.d Violation modes
6.2.d [i] Err disable
6.2.d [ii] Shutdown
6.2.d [iii] Protect restrict
6.2.e Shutdown unused ports
6.2.f Err disable recovery
6.2.g Assign unused ports in unused VLANs
6.2.h Putting Native VLAN to other than VLAN 1
6.3 Configure and verify ACLs to filter network traffic
6.4 Configure and verify ACLs to limit telnet and SSH access to the router

7.0 Troubleshooting 13%

7.1 Troubleshoot and correct common problems associated with IP addressing and host configurations
7.2 Troubleshoot and resolve VLAN problems
7.2.a Identify that VLANs are configured
7.2.b Verify port membership is correct
7.2.c Correct IP address is configured
7.3 Troubleshoot and resolve trunking problems on Cisco switches
7.3.a Verify correct trunk states
7.3.b Verify correct encapsulation is configured
7.3.c Correct VLANs are allowed
7.4 Troubleshoot and resolve ACL issues
7.4.a Verify statistics
7.4.b Verify permitted networks
7.4.c Verify direction
7.4.c [i] Interface
7.5 Troubleshoot and resolve Layer 1 problems
7.5.a Framing
7.5.b CRC
7.5.c Runts
7.5.d Giants
7.5.e Dropped Packets
7.5.f Late Collisions
7.5.g Input/Output errors


Recent Posts


Tags

and/or Remove an End-Device and/or Remove an Infrastructure Device and/or Remove Cables (network and/or power) Cisco 642-997 DCUFI exam Cisco 642-999 DCUCI exam Configure Cisco Unity Connection Configure Cisco Unity Express using the GUI Describe and implement centralized call processing redundancy Describe Data Center Structure and Modularity Describe the Design Methodology Describe the Technologies used within the Data Center Describe WLAN Fundamentals Design and Deploy WLAN Infrastructure for Mobility Design Network Management Considerations into a Data Center Design the Access Layer of a Data Center General Networking Knowledge given a Network Design and a set of Requirements High Availability Routing Features Identify Cisco Equipment and Related Hardware Implement high availability features on Cisco Unified Fabric products in a Cisco Data Center Architecture Implement Multicast over Wireless Implement QoS for Wireless Applications Implement VoWLAN Infrastructure Security Infrastructure Services Install Integrate Client Device Security IP Services LAN Switching Technologies Layer 2 Technologies Layer 3 Technologies Maintain Appropriate End-Devices and Industrial Network Infrastructure Devices Manage the Unified Fabric in a Cisco Data Center Architecture Monitoring and Reporting Tools Network Principles Replace Service-Related Knowledge Threat Defense Threat Defense Architectures Troubleshoot Call Setup Issues Troubleshooting Troubleshoot Registration Issues UCS Compute Troubleshooting VPN Technologies WAN Technologies

Links

Powered by CCNP Exams Test Base